News of > Navcores 9 for TomTom Devices - Page 10

Hi All,

Please excuse my ignorance on this subject but I have had a good read over the forums for the past few hours and I havent yet come up with a solution that works so I hope you can help.

I have a stock TomTom One 3rd Edition (512mb) S/N Y4xxxxxxxxxx

It is currently running a stock Map and Navcore.

DeviceName=TomTom ONE
DeviceVersionHW=ONE (v6)
DeviceSerialNumber=Y4xxxxxxxxxx
DeviceUniqueID=XXXXX XXXXX
RamDiskVersion=20070913
BootLoaderVersion=53026
LinuxVersion=2311
ApplicationVersionVersionNumber=7130
ApplicationVersion=8476
UserLanguage=English ...

Hello everybody, first of all thanks for the efforts of this team.
I have an old Go500 with 32 mb which still works with Navcore 8.455. I would like to upgrade the Navcore to a 9 version in order to use newer maps. Which version do you advise for me? I've tried the Universal Navcore Installer and it apparently works but I experienced a few issues (a few restarts and a freeze).
Can you please ...

Hello!

I was wondering if there are any plans to look into the Tomtom Rider 40(0) software for other devices? Is it even possible?

Thanks!

Hey guys,

I can't quite work out what maps to get for Navcore 9.702.

I have installed the Navcore on a 16gb sd (Don't have smaller size atm) but when I turn it on it says maps are outdated for trucks or something ...
And there are quite a few versions of the maps on here.

I am sure this is a simple answer :/ I tried looking through the forums for answer.

My device is stuck in a reboot loop.

Here is what I have done so far...

BootLoaderVersion=55274

Installed 8GB CF drive in place of the 2.5GB Microdrive. Downloaded and installed 9.485 from this website. Set emu to 37-X50. Downloaded and installed Europe 945.6175 from this website. Ran fastactivate and patched the map.

Now here what happens. The first boot bring up the options for language, date etc. I set those then it reboots..and then does ...

hi guys i have tomtom go , one version need to update it plz guide which nevcore will work gine on it and which iberia map will work i have tried navcore 9.510 but it stuck on logo here is information of tomtom,

DeviceName=TomTom Go
DeviceVersionHW=ONE
DeviceSerialNumber=XXXXXXXXXXXX
DeviceUniqueID=XXXXX XXXXX
RamDiskVersion=20060328
BootLoaderVersion=428
LinuxVersion=1011
ApplicationVersionVersionNumber=5450
ApplicationVersion=5652
UserLanguage=Español

Now I have another problem I have with the Navcore SE_TZ_9.702 _Uni_Truck with autostart, autostart works one hour,when it's switched off overnight in the morning does not turn on when I put in the car.What's the problem?

Hi there,

I'm new here. I have a TomTom Go 540 LIVE and was wondering if i can add this navcore and map to my device?
The device has an SD slot, and i have an 8GB SDHC card.
can anyone help please?

I have a Go Live 1535 with Navcore 12.071.xxx Can I update the map?? Perhaps downgrade the Navcore?

Thanks,
Bill

Hi,
I have an old TomTom One X , i decided to upgrade the navcore v8.562 to navcore v9.510(http://www.navitotal.com/navcores-9-for-tomtom-devices-f124/universal-navcore-installer-t14168.html) and also upgrade the map to Iberia_940_5965.

With the new navcore, i feel it's too slow compared with the old navcore.

Any suggestions?