Stickies - Page 23

How To Change Which Map Is Displayed On A Garmin GPS

With so many maps to choose from on this website and available from Garmin you're likely to have multiple maps loaded on your GPS receiver and you'll need to turn some on or off to show or hide different maps. This is most obvious when you have a topo showing and want to show City Navigator, or you have a topo showing and need ...

How To Load Maps On My Garmin GPS Unit

These days many of Garmin’s new GPS receivers contain built in maps, from the nuvi series with road maps to the Colorado and Oregon with topos. These receivers can still have maps loaded to them though in addition to the maps that already exist. This how-to will detail how to load additional maps to your GPS unit with either a Mac or a PC.

• PC: Use ...

Adding multiple maps in Garmin Nuvi 255w GPS
This is example device some other devices use similar names

Theoretically, the Garmin Nuvi GPS navigator can be loaded with hundreds of map

The maps are stored in specific mapset files with *.img extension in the flash memory of the GPS unit. Each mapset file contains one or many maps in it. Beside that, the Garmin GPS navigator can also recognise and load up one additional mapset ...

Using GMapTool to combine multiple maps into one mapset file for Garmin GPS

We mentioned earlier that Garmin GPS navigator supports several mapset files. That should be enough for normal users.

Saving different map into different mapset file also makes it easy to replace the map to newer version in the future, as well as convenient to remove a single map from the GPS storage.

However, if you have a lot of map that you ...

Mapsource tutorial: Unlock Mapsource
for newbies

1. Use Jetmouse keygen, Download it here
How to get Unit ID number on Garmin units - Video

2. Use Mapsource special version, Download it here

3. All is one picture:



After you add your unlock key to mapsource you may need restart mapsource

The extra features of iGO Primo are optional and use up a huge amount of RAM, CPU usage and disk space. However, if your device is capable, the instructions for installing them are below.

128 MB of RAM is recommended for iGO Primo with all the enhancements, but it will run on some 64 MB devices, If you have less than 128 MB RAM and are having memory issues then check the system memory division ...

READ THROUGH THIS GUIDE FIRST, AND THEN BACKUP EVERYTHING ON YOUR DEVICE. WE ARE NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE.


SYSTEM REQUIREMENTS.

Officially, iGO Primo presently supports only devices that have 320x240, 480x272 and 800x480 screen resolutions. Your device should have at least 64MB of RAM.

Download this version of iGO Primo supplied by Chas521 and one map of your country.

Spoiler: Show

http://www.navitotal.com/showthread.php?1728-Working-Primo-from-my-device

Maps and extras are available from here. R3 maps will work with ...

WinCE Mapshare patch

1. Make copy of TTNAVIGATOR.BIF to TTGO.ORI

2. copy these files to root directory download WinCE Mapshare patch

3. "Current MAP" folder contain CurrentMap.dat files

default CurrentMap.dat contain scandinavia, so you must use folder name scandinavia for your map
copy some .dat file to root of device (rename it and replace old one).
you can open .dat files with notepad and you see what is inside but do not edit anything

eg. ...

Visual unlock for Becker Traffic Assist Highspeed II:



features:

* run original Becker software or iGo Primo
* Total Commander
* Day/Night schemes
* set Moodlight


Instalation instructions:

* connect your Becker via ActiveSync to PC
* Rename \My Flash Disk\Shell.exe to ShellB.exe
* extract archive
* copy archive (without the 1st level folder) to flash disk
* that's it! (switch off and back on)

download: http://rapidshare.com/files/426737476/visual_GPS_Becker_v101.rar

mirror: http://www.megaupload.com/?d=HCYDV0BD


D.

Installation instructions for WinCE5 64MB PNA devices.

Dedicated device guides.
Binatone
Mio Moov or Navman
Windows Mobile PDA's

Does not work on WinCE4.2 or WinCE6 devices, Or with WinCE5 devices with screen resolutions larger that 480x272

I know it's possible to install Tomtom 7 on WinCE4.2 and WinCE 6 devices with the aid of Mortscript but to be honest there are far more reliable options out there for these devices like iGO Primo or Garmin ...