Garmin HomePort   

Garmin HomePort

Postby PiEtU » Sun Aug 08, 2010 12:40 am

[SIZE="3"]Garmin HomePort 2.0.4[/size]

Overview:
Before heading out on the open water, plan your voyage with HomePort — marine trip-planning software¹ that lets you plan and organize routes from the convenience of your computer.

Use your existing BlueChart® preprogrammed card, or transfer the preloaded maps² directly from your chartplotter to an SD™ card. Then simply plug the card into your computer's card reader to start planning your voyage.

Navigating waters with no visible landmarks or shallow shorelines can be a daunting task for even the most experienced navigator. With your existing BlueChart data together with HomePort on your computer, you’ll have the ability to view map details such as underwater hazards and hidden obstacles and plan a route to avoid them.

HomePort also offers features such as depth profiles, distance and bearing measurements, and tidal predictions.
Manage Your Data

In addition to managing waypoints, routes and tracks, you can store information from past voyages right on your computer. HomePort also will help you create point-to-point routes, determine fuel usage and estimate your travel time for each leg of your route — saving you time and money.
View Marine Charts

It’s easy to browse and view chart detail on your computer screen and mark waypoints and other points of interest. When finished, send the data to an SD card or proprietary Garmin datacard to load into your compatible Garmin chartplotter or sounder.

HomePort is compatible with BlueChart, BlueChart g2 and BlueChart g2 Vision® navigation charts. Currently, it is only compatible with Windows® operating systems.

¹HomePort software does not include map data.

²Inland Lakes software is not compatible with HomePort. If using a device preloaded with Inland Lakes software in conjunction with BlueChart g2 and g2 Vision pre-programmed cards, only the pre-programmed cards are compatible.

Features:
* Displays both fishing and navigational charts from BlueChart g2 Vision.
* Allows user to measure distance and bearing on the charts.
* Displays route/track depth profile.
* Converts tracks into point-to-point routes (track to route conversion) and specifies the speed for each leg of the route.
* Provides ETA and arrival times (for each leg) when you create routes.
* Shows animated playback of data collected on device.
* Calculates fuel consumption (based on fuel flow data provided by the user).
* Exports selected data to Google™ Earth.
* Displays statistics and graphical information about tide stations, tidal streams and currents.
* Displays grid lines to show latitude and longitude.
* Allows you to manage waypoints, routes and tracks.
* Allows you to view the map north-up, map-up or course-up.
* Displays celestial information such as sunrise, sunset and moon phase.
* Displays photos and point-of-interest detail.
* Supports vector charts.
* Includes worldwide basemap.
* Allows multiple map views.

[SIZE="3"]Download Garmin HomePort 2.0.4[/size]
OR
[SIZE="3"][Please Register or Login to download file] [/size]
Pass: [color="Sienna"]navitotal[/color]

[Please Register or Login to download file]
PiEtU offline


User avatar Elite Member



 
Joined: Sat Feb 13, 2010 9:59 pm
Posts: 929
Location: Pitcairn Islands
Has thanked: 0 time
Been thanked: 156 times
Age: 58

Postby Pepin » Mon Aug 09, 2010 5:09 am

Code: Select all
Installation Instructions if you can not find your license or deleted your previous installation:

- Open archive and put HomePort_204.exe on your computer.
- Open HomePort_204.exe archive with WinRAR or 7zip and COPY all files in a new folder on your computer.
- Run HomePort_204.exe and STOP at warning "no previous installation found".
- Run HPMAIN_ENU.msi (or your language .msi) and complete installation.
- Close "no previous installation found" window.
- You can remove the folder you created.
 
Homeport is now installed and can be run normally.

(tip, this procedure works also with other/similar programs)
Pepin offline


Junior Member



 
Joined: Sat Aug 07, 2010 3:25 am
Posts: 38
Has thanked: 0 time
Been thanked: 0 time

Postby spenser » Wed Sep 22, 2010 7:02 am

Im stuck at Run HPMAIN_ENU.msi (or your language .msi) and complete installation


I cant find hpmain.msi or english.msi.

Any guidance please?
spenser offline


Junior Member



 
Joined: Mon Sep 13, 2010 2:06 am
Posts: 3
Has thanked: 0 time
Been thanked: 0 time

Postby PiEtU » Wed Sep 22, 2010 7:36 am

you must first extract HomePort_204.exe with winrar, winzip....
PiEtU offline


User avatar Elite Member



 
Joined: Sat Feb 13, 2010 9:59 pm
Posts: 929
Location: Pitcairn Islands
Has thanked: 0 time
Been thanked: 156 times
Age: 58

Postby spenser » Wed Sep 22, 2010 8:16 am

~Ive unzipped homeport204.exe

I installed it in c:/homeport


size 56.5 Mb

Chose run as administrator


Then a garmin window opens.


Then it says -
Previous HomePort not found!

Setup will terminate


There is a ok button and the x closing in the corner.
spenser offline


Junior Member



 
Joined: Mon Sep 13, 2010 2:06 am
Posts: 3
Has thanked: 0 time
Been thanked: 0 time

Postby PiEtU » Wed Sep 22, 2010 1:14 pm

spenser wrote:~Ive unzipped homeport204.exe

Then a garmin window opens.

Previous HomePort not found!
Setup will terminate



IF you extract homeport204.exe file first, there is HPMAIN_XXX.msi file to install it
( if you not cant do that rename homeport204.exe to homeport204.rar )

IF you want install direct from exe use this register fix first
PiEtU offline


User avatar Elite Member



 
Joined: Sat Feb 13, 2010 9:59 pm
Posts: 929
Location: Pitcairn Islands
Has thanked: 0 time
Been thanked: 156 times
Age: 58

Postby spenser » Wed Sep 22, 2010 3:31 pm

i used the register first and homeport is now installed.

You are a magician!
spenser offline


Junior Member



 
Joined: Mon Sep 13, 2010 2:06 am
Posts: 3
Has thanked: 0 time
Been thanked: 0 time

Postby Jchnusa » Sat Jan 01, 2011 10:11 am

Fabulous!
It works great!

Thanks

J.
Jchnusa offline


Junior Member



 
Joined: Sat Jan 01, 2011 7:03 am
Posts: 1
Has thanked: 0 time
Been thanked: 0 time

Postby Foxcub » Sat Aug 13, 2011 7:00 pm

If there are any new update for HomePort 204?
I can not find this program on the Garmin website
and can not check for updates from this programm - (mistake to connect, but internet is ok)
Foxcub offline


Junior Member



 
Joined: Sat Mar 05, 2011 12:08 pm
Posts: 9
Has thanked: 0 time
Been thanked: 0 time

Postby weerab1981 » Sat Aug 13, 2011 8:49 pm

looks to have been replaced with this as i couldnt find any thing else on homeport
[Please Register or Login to download file]
weerab1981 offline


Junior Member



 
Joined: Wed Aug 10, 2011 2:23 am
Posts: 6
Has thanked: 0 time
Been thanked: 0 time

Postby Foxcub » Sun Aug 14, 2011 7:30 am

Thanks but what is it?
BlueChart® 2011.5
I can not understand what do I have to do whith it?
Foxcub offline


Junior Member



 
Joined: Sat Mar 05, 2011 12:08 pm
Posts: 9
Has thanked: 0 time
Been thanked: 0 time


Return to Software

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 3 guests