Fotchy wrote:artfull,

I am trying to download Garmin Mobile XT 5.5.20 for WinCE 5 480 x 272 for Storage Card. When i click on download link and click "skip add", both firefox and internet explorer browsers want to download "downloadmanager_setup.exe". Can you please fix link?

Cheers

Shane

1.copy each folder to Storage Card
folder 1
folder Garmin
folder GPX
folder POI
folder SYSTEM
folder VEHICLE
folder VOICE

2. rename your map to GMAPPROM.IMG add map in SYSTEM folder

3. run path Storage Card > Garmin > garmin_full.exe

4. first run might take about 60 seconds

5. menu setting go to press right corner at ?
will go to page setting

6. set English by pressing ?

7. go to last tab [tab ten] press last tab will go to next page
this page chooses language



credit & thanks to artfull

Hidden Content

This board requires you to be registered and logged-in to view hidden content.

Press reload or refresh after pressing thanks.

chas521,

Thank you for posting a link for me to download Garmin XT 5.52, much appreciated.

Followed your instructions, however no luck starting program. When i run garmin_full.exe, from Visual - Mio unlock/shell, a window appears behind "setting brightness" screen and device freezes. Can you please help.

Cheers,
Shane

@mmyhassan,

can you please teach me how to install big keyboard for wince6 800*480 device.
thanks!

hmosquera wrote:Hi friend try with this file.

4911

Replace the file (remember unrar the file to replace) y run again the instalation soft



Bye

hi hmosquera,

I am a newbie with gamin installation and all. can you please teach me how to install keyboard.rar on my wince6 800*480 device.
mine is a HU with gps and is already installed in my car.

thanks for your time!

Fotchy wrote:chas521,

Thank you for posting a link for me to download Garmin XT 5.52, much appreciated.

Followed your instructions, however no luck starting program. When i run garmin_full.exe, from Visual - Mio unlock/shell, a window appears behind "setting brightness" screen and device freezes. Can you please help.

Cheers,
Shane

Sorry Shane, but those instructions are not mine. I'm only posting what was available. My best advice is to play around with the different elements until successful. Perhaps you could post more explicit steps of what you did and someone out there could guide you with the steps they took in a successful installation instead of asking my advice. SORRY.

Perhaps you need to make a change in the .mscr [I think it's called] because your SD card is named something else: For example, could be SDCARD, SD CARD, STORAGECARD, STORAGE CARD, SDMMC, etc.

EDIT: You should read the posts in the beginning of this thread.

I have a Navman S200 with the following specification (WinCE 5, 480x272 screen resolution, 128MB SD-RAM). I have Visual - Mio unlock/shell v1.14 REV.01 installed and i am trying to install Garmin XT 5.52 onto micro SD card labelled "Storage Card". Steps i've followed so far.

1. Downloaded Garmin XT 5.52 for "Storage Card" from post #381 (link from post #1 was dead).
2. Copied folders to Storage Card
folder 1
folder Garmin
folder GPX
folder POI
folder SYSTEM
folder VEHICLE
folder VOICE
3. Downloaded Garmin City Navigator Australia and New Zealand NT 2013.40 image (unlocked) and renamed map to GMAPPROM.IMG. Placed map in SYSTEM folder
4. Set path to garmin_full.exe in Visual - Mio unlock/shell.
5. Run path Storage Card > Garmin > garmin_full.exe. Unit displays "Launching GPS application", a windows pop up in the background, then unit displays "setting display brightness" and freezes.

I noticed some files/folders provided from link in post #381 are in a different language (Garmin XT 5.52 may be wrong version for my device). Also checked "garmin_Full.mscr" and "set.mscr" files and noticed no path to "Storage Card". I haven't replaced GIR inside Garmin folder for 480x272 screen, as link from post #1 was dead. Can someone help me please to change paths to "Storage Card" in .mscr files and install Garmin XT 5.52 onto my device.

Cheers,
Shane

has anyone got a working link for all the files?
my device is wince6.0, 800x480, StorageCard with 128MB.

thanks!

Fotchy wrote:I have a Navman S200 with the following specification (WinCE 5, 480x272 screen resolution, 128MB SD-RAM). I have Visual - Mio unlock/shell v1.14 REV.01 installed and i am trying to install Garmin XT 5.52 onto micro SD card labelled "Storage Card". Steps i've followed so far.

1. Downloaded Garmin XT 5.52 for "Storage Card" from post #381 (link from post #1 was dead).
2. Copied folders to Storage Card
folder 1
folder Garmin
folder GPX
folder POI
folder SYSTEM
folder VEHICLE
folder VOICE
3. Downloaded Garmin City Navigator Australia and New Zealand NT 2013.40 image (unlocked) and renamed map to GMAPPROM.IMG. Placed map in SYSTEM folder
4. Set path to garmin_full.exe in Visual - Mio unlock/shell.
5. Run path Storage Card > Garmin > garmin_full.exe. Unit displays "Launching GPS application", a windows pop up in the background, then unit displays "setting display brightness" and freezes.

I noticed some files/folders provided from link in post #381 are in a different language (Garmin XT 5.52 may be wrong version for my device). Also checked "garmin_Full.mscr" and "set.mscr" files and noticed no path to "Storage Card". I haven't replaced GIR inside Garmin folder for 480x272 screen, as link from post #1 was dead. Can someone help me please to change paths to "Storage Card" in .mscr files and install Garmin XT 5.52 onto my device.

Cheers,
Shane

wes3284 wrote:has anyone got a working link for all the files?
my device is wince6.0, 800x480, StorageCard with 128MB.

thanks!

There appear to be [now 10] that have downloaded the package from my post above. 8 appear to have been successful with installing it. So I guess it works OK with the instructions. Also it would appear that you could change the language during the install.

chas521 wrote:There appear to be [now 10] that have downloaded the package from my post above. 8 appear to have been successful with installing it. So I guess it works OK with the instructions. Also it would appear that you could change the language during the install.
NT

I got it working on my wince6.0 800x480 device. but the system crashes from time to time.
I noticed some characters in .mscr but I'm not sure if that is what causing those crashes on my system.

#ErrorLevel("OFF")

# È¡µÃ¿¨Ãû
cwd=SystemPath("ScriptPath")
p=Find(cwd,"\",2)
cardName=SubStr(cwd,1,p-1)
prgMenu=SystemPath("ProgramsMenu")

# ½¨Á¢¿ÕĿ¼
MkDir(cardName \ "GPX")
MkDir(cardName \ "POI")
MkDir(cardName \ "VOICE")
MkDir(cardName \ "VEHICLE")

# дÈë×¢²á±í
CallScript(cwd \ "Reg.mscr")


# ½¨Á¢¿ªÊ¼²Ëµ¥¿ì½Ý·½Ê½
garminAppDir=prgMenu \ "Garminµ¼º½"
MkDir(garminAppDir)
CreateShortcut(GarminAppDir \ "Æô¶¯Garmin.lnk","""" & cardName \ "Garmin\Que.exe""",TRUE)
CreateShortcut(GarminAppDir \ "ÉèÖÃ.lnk","""" & cardName \ "\1\gmapplauncher.exe"" SETTINGS",TRUE)
CreateShortcut(cardName \ "\1\ÉèÖÃ.lnk","""" & cardName \ "\1\gmapplauncher.exe"" SETTINGS",TRUE)

#ÔËÐÐCE EXPLORER
Run("\windows\explorer.exe")
Sleep ( 3000 )

#Òþ²ØÈÎÎñÀ¸
Run(SystemPath("ScriptPath")\"TaskbarHide.exe")

#ÔËÐÐGARMIN³ÌÐò
RunWait(SystemPath("ScriptPath")\"Que_Full.exe")

If(ProcExists("explorer.exe"))
Kill("explorer.exe")
EndIf

Me neither. What happens if you delete them? Make a backup first before you try it - just in case.

@wes3284

Maybe you could post how you got it to work.

In mortscript, a # is like a rem statement or comment, anything after it on the same line is ignored.

It looks like the file has been corrupted.

chas521 wrote:@wes3284

Maybe you could post how you got it to work.

it was working even with the corrupted .mscr but I'm experiencing random crashes.
back reading this thread I saw some posts about .mscr and changed mine accordingly
but still it crashes from time to time

anyway, here is my updated .mscr

#ErrorLevel("OFF")

# System Directories
cwd=SystemPath("ScriptPath")
p=Find(cwd,"\",2)
cardName=SubStr(cwd,1,p-1)
prgMenu=SystemPath("ProgramsMenu")

# Make Directories
MkDir(cardName \ "GPX")
MkDir(cardName \ "POI")
MkDir(cardName \ "VOICE")
MkDir(cardName \ "VEHICLE")

# Write to Registry
CallScript(cwd \ "Reg.mscr")


# Create Start Menu shortcut
garminAppDir=prgMenu \ "Garmin Navigation"
MkDir(garminAppDir)
CreateShortcut(GarminAppDir \ "start Garmin.lnk","""" & cardName \ "Garmin\Que.exe""",TRUE)
CreateShortcut(GarminAppDir \ "Settings.lnk","""" & cardName \ "\1\gmapplauncher.exe"" SETTINGS",TRUE)
CreateShortcut(cardName \ "\1\set.lnk","""" & cardName \ "\1\gmapplauncher.exe"" SETTINGS",TRUE)

# Run EXPLORER
Run("\windows\explorer.exe")
Sleep ( 1000 )

# Hide Taskbar
Run(SystemPath("ScriptPath")\"TaskbarHide.exe")

# Run Garmin XT
RunWait(SystemPath("ScriptPath")\"Que_Full.exe")

If(ProcExists("explorer.exe"))
Kill("explorer.exe")
EndIf

chas521,

Sorry, if it sounded like i was trying to offend you, that was NOT the case. I am a newbie and didn't know if corrupted .mscr was the issue.

Tried replacing corrupted .mscr with data in post #392 but still same end result, Garmin XT 5.52 fails to start. Do i need to replace "cardName" in .mscr files with "Storage Card"? Is it worth troubleshooting any further? I would really like to solve this issue with Garmin XT 5.52 not starting.

Not insulted in the least! Try going here [post #1] http://www.navitotal.com/showthread.php?2329-Garmin-Mobile-XT-CE-for-Chinanavi-with-800x480 Just make sure you download the correct version for the name of your SD card. Click on the down arrow for filefactory.