{Tutorial} How to change Baud rate and COM port   

Postby lploon » Mon Sep 06, 2010 2:08 pm

thanks bros, tested and it is working beautifully! finally my dust collecting china gps is alive. :D :clapping_mini:
lploon offline


Junior Member



 
Joined: Wed Aug 25, 2010 3:36 am
Posts: 3
Has thanked: 0 time
Been thanked: 0 time

Postby locosta » Tue Sep 07, 2010 2:59 am

Monters GPS wrote:Download this and extract the folder into your local disk ( c:\upx304 or d:\upx304) etc......



For video guide download here: [Please Register or Login to download file]

thanks!at first.
Have you had a video guide for another upx decompress methode as below:

000003d0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
000003e0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
000003f0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................

thanks again.
locosta offline


Junior Member



 
Joined: Sat Aug 07, 2010 10:30 am
Posts: 11
Has thanked: 0 time
Been thanked: 0 time

Postby torsten.schmitz » Tue Sep 07, 2010 6:36 am

locosta wrote:thanks!at first.
Have you had a video guide for another upx decompress methode as below:

000003d0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
000003e0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
000003f0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................

thanks again.


Always check 0x3e0h and change to be :
000003d0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
000003e0h: 55 50 58 21 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
000003f0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
torsten.schmitz offline


User avatar Member



 
Joined: Mon Jun 21, 2010 9:28 pm
Posts: 190
Has thanked: 0 time
Been thanked: 0 time

Postby locosta » Tue Sep 07, 2010 8:12 am

torsten.schmitz wrote:Always check 0x3e0h and change to be :
000003d0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
000003e0h: 55 50 58 21 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
000003f0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................


thanks torsten.schmitz
after change 0x3e0h but still cant unpack it
the following I have modified:
[Please Register or Login to download file]

00000210h: 00 00 00 00 00 00 00 00 55 50 58 30 00 00 00 00 ; ........UPX0....
00000220h: 00 40 30 00 00 10 00 00 00 00 00 00 00 00 00 00 ; .@0.............
00000230h: 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 E0 ;.............?
00000240h: 55 50 58 31 00 00 00 00 00 A8 0C 00 00 50 30 00 ; UPX1.....?..P0.
00000250h: 00 A8 0C 00 00 04 00 00 00 00 00 00 00 00 00 00 ; .?.............
00000260h: 00 00 00 00 40 00 00 E0 55 50 58 32 00 00 00 00 ; ....@..豥PX2....
00000270h: 00 02 00 00 00 00 3D 00 00 02 00 00 00 AC 0C 00 ; ......=......?.
00000280h: 00 00 00 00 00 00 00 00 00 00 00 00 40 00 00 40 ; ............@..@
00000290h: 2E 72 73 72 63 00 00 00 00 3E 00 00 00 10 3D 00 ; .rsrc....>....=.
000002a0h: 00 3E 00 00 00 AE 0C 00 00 00 00 00 00 00 00 00 ; .>...?.........
000002b0h: 00 00 00 00 40 00 00 40 00 00 00 00 00 00 00 00 ; ....@..@........
000002c0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
000002d0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
000002e0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
000002f0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
00000300h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
00000310h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
00000320h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
00000330h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
00000340h: 00 00 00 0A 00 24 49 6E 66 6F 3A 20 54 68 69 73 ; .....$Info: This
00000350h: 20 66 69 6C 65 20 69 73 20 70 61 63 6B 65 64 20 ; file is packed
00000360h: 77 69 74 68 20 74 68 65 20 55 50 58 20 65 78 65 ; with the UPX exe
00000370h: 63 75 74 61 62 6C 65 20 70 61 63 6B 65 72 20 68 ; cutable packer h
00000380h: 74 74 70 3A 2F 2F 75 70 78 2E 73 66 2E 6E 65 74 ; ttp://upx.sf.net
00000390h: 20 24 0A 00 24 49 64 3A 20 55 50 58 20 33 2E 30 ; $..$Id: UPX 3.0
000003a0h: 34 20 43 6F 70 79 72 69 67 68 74 20 28 43 29 20 ; 4 Copyright (C)
000003b0h: 31 39 39 36 2D 32 30 30 39 20 74 68 65 20 55 50 ; 1996-2009 the UP
000003c0h: 58 20 54 65 61 6D 2E 20 41 6C 6C 20 52 69 67 68 ; X Team. All Righ
000003d0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
000003e0h: 55 50 58 21 00 00 00 00 00 00 00 00 00 00 00 00 ; UPX!............
000003f0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
locosta offline


Junior Member



 
Joined: Sat Aug 07, 2010 10:30 am
Posts: 11
Has thanked: 0 time
Been thanked: 0 time

Postby artfull » Tue Sep 07, 2010 9:16 am

locosta wrote:thanks torsten.schmitz
after change 0x3e0h but still cant unpack it
the following I have modified:
[Please Register or Login to download file]

00000210h: 00 00 00 00 00 00 00 00 55 50 58 30 00 00 00 00 ; ........UPX0....
00000220h: 00 40 30 00 00 10 00 00 00 00 00 00 00 00 00 00 ; .@0.............
00000230h: 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 E0 ;.............?
00000240h: 55 50 58 31 00 00 00 00 00 A8 0C 00 00 50 30 00 ; UPX1.....?..P0.
00000250h: 00 A8 0C 00 00 04 00 00 00 00 00 00 00 00 00 00 ; .?.............
00000260h: 00 00 00 00 40 00 00 E0 55 50 58 32 00 00 00 00 ; ....@..豥PX2....
00000270h: 00 02 00 00 00 00 3D 00 00 02 00 00 00 AC 0C 00 ; ......=......?.
00000280h: 00 00 00 00 00 00 00 00 00 00 00 00 40 00 00 40 ; ............@..@
00000290h: 2E 72 73 72 63 00 00 00 00 3E 00 00 00 10 3D 00 ; .rsrc....>....=.
000002a0h: 00 3E 00 00 00 AE 0C 00 00 00 00 00 00 00 00 00 ; .>...?.........
000002b0h: 00 00 00 00 40 00 00 40 00 00 00 00 00 00 00 00 ; ....@..@........
000002c0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
000002d0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
000002e0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
000002f0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
00000300h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
00000310h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
00000320h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
00000330h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
00000340h: 00 00 00 0A 00 24 49 6E 66 6F 3A 20 54 68 69 73 ; .....$Info: This
00000350h: 20 66 69 6C 65 20 69 73 20 70 61 63 6B 65 64 20 ; file is packed
00000360h: 77 69 74 68 20 74 68 65 20 55 50 58 20 65 78 65 ; with the UPX exe
00000370h: 63 75 74 61 62 6C 65 20 70 61 63 6B 65 72 20 68 ; cutable packer h
00000380h: 74 74 70 3A 2F 2F 75 70 78 2E 73 66 2E 6E 65 74 ; ttp://upx.sf.net
00000390h: 20 24 0A 00 24 49 64 3A 20 55 50 58 20 33 2E 30 ; $..$Id: UPX 3.0
000003a0h: 34 20 43 6F 70 79 72 69 67 68 74 20 28 43 29 20 ; 4 Copyright (C)
000003b0h: 31 39 39 36 2D 32 30 30 39 20 74 68 65 20 55 50 ; 1996-2009 the UP
000003c0h: 58 20 54 65 61 6D 2E 20 41 6C 6C 20 52 69 67 68 ; X Team. All Righ
000003d0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................
000003e0h: 55 50 58 21 00 00 00 00 00 00 00 00 00 00 00 00 ; UPX!............
000003f0h: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ; ................



Yeah.....!!!
That's new unpacking method that M3 release start from April 2010. They delete all header info.
Send your exe here and we will help you but Don't have any tutorial so far....
[font="Palatino Linotype"][color="Magenta"][SIZE="3"]Appreciate to give donation for the forum,
If you are Happy, your donation will very helpful....[/size][/color][/font]
artfull offline


User avatar Member



 
Joined: Wed Jul 07, 2010 11:37 am
Posts: 237
Has thanked: 0 time
Been thanked: 24 times

Postby tiuniama » Tue Sep 07, 2010 10:49 am

artfull wrote:Yeah.....!!!
That's new unpacking method that M3 release start from April 2010. They delete all header info.
Send your exe here and we will help you but Don't have any tutorial so far....


For this UPX decompress and compress data and checksum been deleted, I think can try to hack the UPX.exe make it get pass the UPX error like Header corrupted Error or Checksum Error. I think M3 also waiting the Tutorial, then they will think again changing other method to protect, for Example: Vietnam Papago.exe, now not using UPX to pack, but using PPC protect program. if you want to have a look vietnam papago.exe protect by PPC protect, you may downloat here [Please Register or Login to download file]
tiuniama offline


Junior Member



 
Joined: Sun Jun 20, 2010 1:08 am
Posts: 72
Has thanked: 0 time
Been thanked: 0 time

Postby torsten.schmitz » Tue Sep 07, 2010 11:12 am

tiuniama wrote:For this UPX decompress and compress data and checksum been deleted, I think can try to hack the UPX.exe make it get pass the UPX error like Header corrupted Error or Checksum Error. I think M3 also waiting the Tutorial, then they will think again changing other method to protect, for Example: Vietnam Papago.exe, now not using UPX to pack, but using PPC protect program. if you want to have a look vietnam papago.exe protect by PPC protect, you may downloat here [Please Register or Login to download file]


Are you sure this working on WinCE?? Or WinMO?
X5 M3 for mobile packed using PPC-Protect already ( since early 2010) but for WinCE they still using UPX protect and some inputing Reg key for fix offset position.
Wow....let's we learn how to unpack PPC Protect.....
torsten.schmitz offline


User avatar Member



 
Joined: Mon Jun 21, 2010 9:28 pm
Posts: 190
Has thanked: 0 time
Been thanked: 0 time

Postby podkrub » Wed Sep 08, 2010 8:06 am

Thanks, now I can change baudrate myself, but how to change comm port, anyone help to explain and give some eg. like change from comm1 to comm2 please.
podkrub offline


Junior Member



 
Joined: Wed Aug 04, 2010 4:41 pm
Posts: 20
Has thanked: 0 time
Been thanked: 0 time

Postby locosta » Sun Sep 12, 2010 12:44 am

tiuniama wrote:For this UPX decompress and compress data and checksum been deleted, I think can try to hack the UPX.exe make it get pass the UPX error like Header corrupted Error or Checksum Error. I think M3 also waiting the Tutorial, then they will think again changing other method to protect, for Example: Vietnam Papago.exe, now not using UPX to pack, but using PPC protect program. if you want to have a look vietnam papago.exe protect by PPC protect, you may downloat here [Please Register or Login to download file]

How to hack the UPX.exe make it get pass the UPX error like Header corrupted Error or Checksum Error?
locosta offline


Junior Member



 
Joined: Sat Aug 07, 2010 10:30 am
Posts: 11
Has thanked: 0 time
Been thanked: 0 time

Postby EdisonX10A » Sun Sep 12, 2010 6:32 am

i a bit confuse about the baud..

my device is com 1 baud 38400 but i using can use com 1 baud 4800..

it's mean that if i use the baud 38400 then when navigate are more accurate?
EdisonX10A offline


Junior Member



 
Joined: Wed May 26, 2010 2:31 am
Posts: 74
Has thanked: 0 time
Been thanked: 0 time

Postby rueben67 » Mon Sep 13, 2010 10:47 pm

What is the code for boudrate 12000 ?
rueben67 offline


Junior Member



 
Joined: Wed Sep 08, 2010 10:25 pm
Posts: 11
Has thanked: 0 time
Been thanked: 0 time

Postby huat » Mon Sep 27, 2010 3:40 am

Why we need to change the Baud rate??
Is the high rate the fast sat serching???

Thank All
huat offline


Junior Member



 
Joined: Mon Sep 27, 2010 3:23 am
Posts: 2
Has thanked: 0 time
Been thanked: 0 time

Postby Kiva87 » Fri Dec 24, 2010 7:47 am

Hi, can anyone help me?
I'm trying to change the com port and baud rate, but i keep getting failed... :(
I'm using papago x5se for 3.5", and my device uses com 2, baud 4800...

I tried to unpack it with upx, but it said:
file is possibly modified etc... :(



thanks before
Kiva87 offline


Junior Member



 
Joined: Thu Dec 16, 2010 2:09 pm
Posts: 4
Has thanked: 0 time
Been thanked: 0 time

Postby Monters GPS » Fri Dec 24, 2010 5:05 pm

Kiva87 wrote:Hi, can anyone help me?
I'm trying to change the com port and baud rate, but i keep getting failed... :(
I'm using papago x5se for 3.5", and my device uses com 2, baud 4800...

I tried to unpack it with upx, but it said:
file is possibly modified etc... :(



thanks before


Hi Kiva87,

Please remove the attachment file As soon as possible......If you want to attach files please use like FIlefactory / easyshare / hotfile......etc do not using Navitotal NT to do any attachment file.
Monters GPS offline


User avatar Elite Member



 
Joined: Mon Jul 26, 2010 9:38 am
Posts: 5120
Has thanked: 0 time
Been thanked: 72 times

Postby andri5880 » Sun Jan 16, 2011 5:40 am

can someone help me cook com4 baud 57600,please pm me.
thank you.
andri5880 offline


Junior Member



 
Joined: Sat Jan 15, 2011 9:20 pm
Posts: 6
Has thanked: 0 time
Been thanked: 0 time

PreviousNext

Return to PaPaGO! Tutorials

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 2 guests