Hello
I have Koolertron (Model:QL-TYT720 Car DVD GPS Navigation Player)

Link for Full Specs Info:

[Please Register or Login to download file]

Running NAV N Go, I GO 8.3.2.93112 jun 8 2009 With Australian R19. WhereiS map data is (120110)

When i have POI on, for example Shops, it shows shops but there is no shop there?

Also it shows incorrect speed limits in some places,The speed Limit is 70, but it shows 80, and it shows speed cameras, but there are no speed cameras in the area i was driving, it also shows Aldi in my area , but we have no aldi in my area LOL any fix for that??

1- whats is the latest I GO Version Available that works with this unit?

2- also what is the Latest Australian Maps to date.

3- It will be nice if some one share there Custom Made POI that wors with this unit and covers allot of Victoria.

4- is there any good Australian TTS high quality voices, that work??? i have 3 AU TTS Voices i downloaded but they don't work, only 1 US TTS and 1 UK TTS Voices work.

5- Any 1 knows if there's a firmware update for this unit? i have sent 6 emails to Koolertron but they never replay back. CHINA!!

6- do navitotal use paypal? i want to donate, i nerve used Alertpay.

7- Thanks you for your help and support in Advance.

1) The device looks not that old and I am guessing (because I couldn't find the available RAM or missed it) that you can use Primo2 without any problem.
Visit this post : http://www.navitotal.com/showthread.php?9656-iGo-Primo-2.0-Build-9.6.5.211211-(Dec-07-2011)-Torrent
and you will find all you need to know.

2) Latest Australian map (when I am not wrong) is the R19.1 (2012Q2) available [Please Register or Login to download file] .
Thanks to JohnnyGT

3) Your POI problem is due to the POI files. When they - thus the info - are wrong (or outdated?) the POI are shown incorrectly. Simple as that. It's no program fault. Some of our Australian friends can better tell you what POI file or "homemade" KML file to use and give a download link.

Speed information - that is the road dependable speed - is information stored in the map itself. Possibly the R19.1 solves your issue.
Regarding speedcam alerts, you need a particular (and of course recent) Australian speedcam file. Regrettably, those files are not posted often on Navitotal and the one link I do have died. .

Again: Some of our Australian visitors might contribute ?

4) Probably you have the wrong TTS engine or ... well, something else could be wrong. Since I gave you a link to Primo2, it's best to use the TTS voices for Primo2 as well. Thus go here : http://www.navitotal.com/showthread.php?9659-iGO-Primo-2.0-Nuance-TTS-Pro-Voices-Torrent

5) No idea. Do you need a firmware update?

6) Navitotal is blacklisted by Paypal. Sorry. But Alertpay is trustworthy, however Canadian

7) No problem. You are welcome!

Hi nabi thanks for your help.

I downloaded i go primo 2 from above link.

when i start the app in my unit it loads then it shows me language selection, i choose Australian AU, then it loads more, and after that i get this error ( fialed to open file: ui_igo8/dayheightcolormap.bmp exiting application) why dose it say i go 8??

I have deleted all old folders from my SD Card and started i go primo 2 fresh. i have looked for ui_igo8 but i cant finde that folder? any help

but i did not delete my Navi.ini, witch have this in it. ( PATH=\igo8-au+nz\igo8.exe
AUTO=1) this file is in my units main folder not primo folder.
**PATHض»ض§³ضس¢خؤآ·¾¶

However i did find (dayheightcolormap.bmp) file in DATA.ZIP that came with the above download, but its in ui_igo9, i am confused where is i go 8??

any ideas?

Thanks for you grate help and support.

OK i have sloved the problem, but i have another one now :(

now it shows (failed to open file: ui_igo8/common/trackinglist.spr exiting application)

I keep getting random errors like above, just after i choose Australia for language, after that loads and above random errors shows up and i have to touch ok and app exists

any help please?

Thanks in advance.

$trackinglist.spr is part of a scheme. IGO8.3 and Primo have some schemes incompatibility, primarily because iGO refers to ui_igo8 while Primo does to ui_igo9 in the skin folder, as you already know. There must be some iGO8 traces or a whole iGO8 left on your SD or device.
Primo gets confused when that happens so we must tell it not to look for iGO (or any other navigation program). Open the Primo sys.txt in a text editor (notepad will do just fine) and see that these lines are in it:

[Folders]
has_secondary_root=0

After saving and closing, make sure the file is called sys.txt, not sys.txt.txt.

thanks for replay these what i have in my sys.txt

[debug]
skip_eula=1
experimental_features=1

[folders]
has_secondary_root=0

[interface]
show_exit=1
extra_settings=1

[other]
demo_enabled=0

[vr]
disabled=1

Also i have the folowing folders in the root of my sd card.
1- backup Folder

2- Games Folder

3- NaviOne Folder

4- Offroad Folder

5- Street Folder I have put the Primo2 inside the STREET Folder, so i use my devise to navigate to i go primo 2.exe

I also i have in my root of SD CARD Navi.ini wich have the following text in it ( PATH=\igo8-au+nz\igo8.exe
AUTO=1
**PATHض»ض§³ضس¢خؤآ·¾¶)

And i have device.nng

Any ideas what i am doing?

Thanks again

How do you start Primo?
What happens when you rename Navi.ini to Navi.ini.old?

i got it working now, after i deleted everything and started fresh now is working 100% awesome.

thanks for your help man you are the best :)

That it is working after a fresh install would mean some file got corrupted while copying Primo to the device the first time.
Don't thank me. This is mainly YT's work. I am old fashioned, still using a 2010 iGO build

nabi wrote:I am old fashioned, still using

And NO SMARTPHONE!!!!

Yurbuh Tuggly wrote:And NO SMARTPHONE!!!!

Not for GPS (yet), not for facebook, not for ... but I do have a simple smartphone (without GPS chip).
And thank you for reminding me of my old age

hi nabi

I have small problem with my I GO Primo 2.

I have set the speed warning to ON, and some times, the voice cuts off,

For example i am driving on 50 Limit zone, and it will say ( This is 50 limit Zone Slowdown ) But some times it doesn't say all of it, it Just says (this.... and nothing after that, cuts off)

I am using Australian TTS male.

i have tried other TTS and still the same.

As i said it happens some times, and sometimes is ok.

any fix for that?

thanks in advance.

I'm not nabi, but I have a little bit of experience with Primo2, so maybe I can help sometimes.:D
Usually, what you describe may be a device with less than the optimal amount of RAM available (128 MB). RAM gets overloaded and the TTS takes a lower priority. If this is the case with your device, nothing much can be done except to maybe dial back/disable some other (3D) features to free up as much RAM as possible.
If you use the diMka skin, you can also (in the TTS settings) set the priority for either Navigation, Warnings, etc. Depends which is more important for you.
If your device already has 128 MB RAM, then it could be that something else (besides Primo) is running in the background eating up RAM that would otherwise be available to Primo.

Yurbuh Tuggly wrote:I'm not nabi,

But you will do

thanks for your replay,

yes i agree it mite be the RAM, the unit runs WINCE 6.0 so it mite have 128 in there, the book, the website have nothing listed regarding the ram, that's MADE IN CHINA FOR YA!

I thing i will just close all background apps if there's any, and play around with primo 2 to disable some useless crap.

thanks again.