News of NaviTotal.com - Page 1338

Hi, just wanna ask for any tested version running well in HTC Flyer Tablet?

Tried few version from Navitotal, but unable to get in full screen...:(

Thank you very much.

In the wake of the news that TT have clinched a deal with JC himself to do a voice file, I thought I'd get in first in the queue ...

So I'm here, with my primus stove, camped out on the pavement alongside the NaviT voices section awaiting HIS arrival.

Yet more strange British behaviour that our American friends will be puzzled by I guess....

:cool:

How can I tell which version of map to use? I will put it on SD card so a full featured map with largest POI list is desired . Is there a chart which shows which version to use on various models. I have 9.205 Navcore

1, Visit download host page and copy the URL into clipboard
2, Go to Premium4All and paste the URL into the box highlighted on the screen shot above.
3, Click Transload file, A new window with ads appears, You must leave this open for at least 10 seconds, otherwise the download is cancelled. See note below.
4, After ten seconds close the ad window and click Transload file again.
5, A new window appears ...

Renault Carminat N.C v.31.1 - NISSAN X7 DVD 2011

Dvd Carminat Navigation Communication v31.1

For this auto:

Megane from 01/10/2008
Scenic from 01/09/2006
Koleos from 01/01/2008
Laguna from 01/04/2005
Vel satis from 01/06/2005
Espace from 01/03/2006
Nissan with Xanavi X7

http://netfolder.in/cTYvRKH/CNC_D_V.31.1

OR

http://hitfile.net/download/folder/1154021

OR

http://turbobit.net/download/folder/1153628

OR

http://www.shragle.com/files/e143db55/cnc_v31.1.part01.rar
http://www.shragle.com/files/2f4d7336/cnc_v31.1.part02.rar
http://www.shragle.com/files/fea1cbc3/cnc_v31.1.part03.rar
http://www.shragle.com/files/6c0c959a/cnc_v31.1.part04.rar
http://www.shragle.com/files/61457791/cnc_v31.1.part05.rar
http://www.shragle.com/files/79cea5cd/cnc_v31.1.part06.rar
http://www.shragle.com/files/cbc23b19/cnc_v31.1.part07.rar
http://www.shragle.com/files/8c0b9258/cnc_v31.1.part08.rar
http://www.shragle.com/files/d847a7cf/cnc_v31.1.part09.rar
http://www.shragle.com/files/a8961e8f/cnc_v31.1.part10.rar
http://www.shragle.com/files/68c3904b/cnc_v31.1.part11.rar
http://www.shragle.com/files/2bc19006/cnc_v31.1.part12.rar
http://www.shragle.com/files/6ccb001f/cnc_v31.1.part13.rar
http://www.shragle.com/files/64a06419/cnc_v31.1.part14.rar
http://www.shragle.com/files/474bcef1/cnc_v31.1.part15.rar
http://www.shragle.com/files/6c464c52/cnc_v31.1.part16.rar
http://www.shragle.com/files/f6b88224/cnc_v31.1.part17.rar
http://www.shragle.com/files/64a863b7/cnc_v31.1.part18.rar
http://www.shragle.com/files/2473b91d/cnc_v31.1.part19.rar
http://www.shragle.com/files/3c61fc66/cnc_v31.1.part20.rar
http://www.shragle.com/files/fc049e55/cnc_v31.1.part21.rar
http://www.shragle.com/files/f903bda5/cnc_v31.1.part22.rar
http://www.shragle.com/files/7c4cbe0c/cnc_v31.1.part23.rar
http://www.shragle.com/files/d08551f8/cnc_v31.1.part24.rar
http://www.shragle.com/files/22f94e0d/cnc_v31.1.part25.rar

Hi all, with the help of you guys I've got iGO 8.3.4.142975 working on a Binatone.

Next challenge is the Truck software, In this link:
http://www.navitotal.com/showthread.php?6680-iGO-8.3-data.zip-with-GJ-skin-integrated-Multiresolution-with-DA-amp-Truck-option
it mentions (and illustrates) the truck option, I drive a wrecker and often run at 65 tons+85 feet in length, so this would be a very useful option for me.

Will this run on my current setup?
Is this available on its own or will it only operate within ...

Perdon se me elvido decir que es para ver las imagenes satelite

¿como se hace para el garmin62c?

hello, this foro is good.

I personally haven't tried it yet. If YOU do, please post your results.

http://www.dowwi.com/

Thanks to Devaspora