Hi all,

I'd appriciate any help in adapting the IGO8/PRIMO/AMIGO to a PDA.
I currently have all of the above running on a PNA (C310/C320) and I'm quite happy with the results.
I'm trying to make a friend which owns a MIO P350 (running IGO8.8 with 2577 folder) unit happy
as well, but so far with no luck.
Obviously I'm missing something here.

Thank you,
Danny

Hi,

I finally managed to install PRIMO on my mio C310 (thanks for your help) and it now works just fine. :clap:

My question is:
On the C310 there are some buttons on the side for volume, menu and power on/off.
Originally when the unit had the MIOMAP software, all of the buttons were functional, but with the PRIMO
only the power off/on is active.

Does anyone ...

To activate Amigo USA/Canada TMC you must have the proper sys.txt for your GPS. Examples of TMC sys.txt options are listed in the data.gro/config folder. Plus (+)

Spoiler: Show

Nextar_PNA_Amigo_USA@08Q4_(NQ)_Nextar.lic
Lifetime Navteq - USA/Canada

http://www.megaupload.com/?d=P10K61Z3

This should work with any version that has TMC options page...

Need some version of igo (primo, 8.3 etc) that works on wince 4.2 based device

Does it matter which way the sat antenna is facing? I mean, the rear of the antenna is where the line comes in so the opposite would be the front.

Due to lack of antenna wire provided, I have to mount my sat antenna on my front dash. When the front of the sat antenna is facing me, sat shows me parked facing the opposite direction. When I spun it around and pulled up and ...

i got a 800x480 screen resolution,,,


So where do i go from there?

Do i need Data.zip?

Do i need Branding.zip?

PRIMO doesnt come with TTS_LOQ by default?

And sys.txt is empty,,,

Basically, is class2 enough?

or its still too slow?

Just purchased a single din Chinese unit from Ebay that did not come with an SD card. Need an iGO8 SD card for the USA, or a copy of. Runs WinCE 6.0, HiDef monitor.

Last image I had I could not get working. So I need the files and help installing....please.

Sat nav is Eonon G1301.

are NAVTEQ still making iGO maps?

2010.Q2 are out but only for EUROPE...

dont see any North America,,, yet,,,,

Hi all,
After successfully running IGO-8 on my C310, I'm trying to upgrade
to PRIMO. I have a working version which ws tested on my C320 unit.
I've spent a lot of time with no success so far.
I've simply used the same version which I used on the C320, but the
resolution is looking very poor. The dat.zip file I have doesn't contains
320X240 resolution folder, so I copied that from my IGO8 version. ...