This one has me stumped.

On Primo 1 and 1.2 after unit 1st fires up (Tried on 2 different in dash 2 dins with 128mb) altitude shows as '0'.
If you reset using red off button in Primo and reopen altitude works.

Any ideas :pray:

Bazzle

ps: both units are 128mb :)
Current gps's with same issue:
http://www.szmaisun.com/show.asp?ArticleID=834&proname=&key=MT-8001
http://www.ebay.co.uk/itm/2-Din-DVD-GPS-Player-RDS-Nissan-QASHQAI-NAVARA-TIDA-/280670308905?pt=UK_Audio_TV_Electronics_In_Car_Entertainment_GPS_In_Car_Audio_Players_PP&hash=item4159410a29

Can anyone help with this problem please?

I`m running Primo 1.1 on a sony 93, I have a speedcam folder that has the .txt file and produces spdb and db file (or update?? anyway there are 3 files inside the speedcam folder). So ok so far.

Trouble is the speedcam only works after a reset.

If I turn off the machine by the red off button or let it turn itself off when the power ...

I just installed 8.3.2.138649_Apr_19_2010_PDA on a HP 6945, Igo shows up on the screen for a second then disapears. any suggestions?

New Israel Map 2011.06
Removed dead link

Hi all,
I apologize in advance if this is already posted however I was not able to find any solution so far.

I have Magellan Maestro 3200c GPS unit on which I have successfully installed IGO 8.3 navigation and I have used it three times so far traveling across Europe with no problem except for Austria.

Whenever I enter address in Austria the program loads the route and when it gets to 100% it restarts, ...

i have donloaded primo 1.1 from a members device, as it was uploaded my him
(chas521 ,http://www.navitotal.com/forums/showthread.php?5500-November-Primo-1.1-from-my-device)

i used the program to test my resolution etc.... the resolution is 480*234 , port 2 ,baud 4800... i changed the branding and data zip to the ones compatible to my device, when i put the sd in the device and everything , i get this message "user interface reolution(480*234) is not supported or compatible skin can not ...

Hello,

I am using a Mio C310X using iGO8, Navteq maps 2010 4Q North America, and the GJ6.18p_da (DVSI & gurjon) skin. I have selected Settings>TC Settings>and checked Precision altitude. The altitude is not displayed.

I did get it for a while with an older map and Gurjon skin. Any clues as how to display it?

Also, is there a way to get the directions spoken earlier or at a greater distance before the turn? ...

Hey all,
I just unlocked my navman s90i device and am wanting to install iGO8. I got all the files for it, including the maps i need, but I cant work out how to install it on the device. Can someone give me a step by step, or point me to site that has a tutorial. I looked at all the tutorials on here and found all of them completely unhelpful, didn't know where to ...

currently in put in this IGO primo Igo Primo 2011(february)+Europe Maps to GPS 320x240
but i delete all the Europe map.
i using MALAYSIA map now.

when i click on SHOW MAP some else popup this msg MAP_HOUSENUMBER_BG130x28.BMP
HELP plz :(
sys.txt
-----------------------------------------------------------------------------------

type="Generic GPS"


powermgm_state="1"


ShowExit=1


show_exit=1
extra_settings=1
;resolution_dir="320_240"
;vga=0


disable_roadsign_navigation_mode=1
rotated_roadsigns=1


extra_settings=1


csv_voice_enabled=1
use_method=1
queue_length=200
sound_volume=255
voice_volume=255
mute_os_key=1
ding=0

3d_config]
disable_roadsign_navigation_mode=0
roadsign_lines_per_screen=18
rotated_roadsigns=0


show_guidance_arrows=1
show_guidance_strip=1 ...

Just noticed a version of igo which runs on a pc running xp. Anyone used it. Was wondering what reciever is best and if they are readily available. Would like to try this.

aflowers