Hi,
I have successfully installed Nabi's "Primo 9.2.0.191493 May 11 2011". Everything works fine except the voices. It sounds OK when you choose the presenter, but they are all stuttering when navigating. It sound more like occasional scratching than a person talking.
I am running it on a HTC-HD2 (Primo 1.1 works perfectly).
Does anyone know how I can solve this?

Thanks in advance,
jerha

Hi all,

I have installed Primo 1.2 on a new SD card. Copying the routes from the old SD was straightforward, but I cannot find the my saved favourites anywhere.
Does anyone know where they are stored?

Thanks in advance,
Jerha

Hi,
i have a navsure 410i dvd/satnav single DIN unit in my car
does anybody have any experiance with getting iGO 8.3 to run on one of these devices?

its a halfords brand as i understand it and is running wince 4.2

the sd card is split into folders with Navigation folder and an igo folder.

from what i have been able to see the unit loads all of the files from the Navigation folder ...

This one has me stumped.

On Primo 1 and 1.2 after unit 1st fires up (Tried on 2 different in dash 2 dins with 128mb) altitude shows as '0'.
If you reset using red off button in Primo and reopen altitude works.

Any ideas :pray:

Bazzle

ps: both units are 128mb :)
Current gps's with same issue:
http://www.szmaisun.com/show.asp?ArticleID=834&proname=&key=MT-8001
http://www.ebay.co.uk/itm/2-Din-DVD-GPS-Player-RDS-Nissan-QASHQAI-NAVARA-TIDA-/280670308905?pt=UK_Audio_TV_Electronics_In_Car_Entertainment_GPS_In_Car_Audio_Players_PP&hash=item4159410a29

Can anyone help with this problem please?

I`m running Primo 1.1 on a sony 93, I have a speedcam folder that has the .txt file and produces spdb and db file (or update?? anyway there are 3 files inside the speedcam folder). So ok so far.

Trouble is the speedcam only works after a reset.

If I turn off the machine by the red off button or let it turn itself off when the power ...

I just installed 8.3.2.138649_Apr_19_2010_PDA on a HP 6945, Igo shows up on the screen for a second then disapears. any suggestions?

New Israel Map 2011.06
Removed dead link

Hi all,
I apologize in advance if this is already posted however I was not able to find any solution so far.

I have Magellan Maestro 3200c GPS unit on which I have successfully installed IGO 8.3 navigation and I have used it three times so far traveling across Europe with no problem except for Austria.

Whenever I enter address in Austria the program loads the route and when it gets to 100% it restarts, ...

i have donloaded primo 1.1 from a members device, as it was uploaded my him
(chas521 ,http://www.navitotal.com/forums/showthread.php?5500-November-Primo-1.1-from-my-device)

i used the program to test my resolution etc.... the resolution is 480*234 , port 2 ,baud 4800... i changed the branding and data zip to the ones compatible to my device, when i put the sd in the device and everything , i get this message "user interface reolution(480*234) is not supported or compatible skin can not ...

Hello,

I am using a Mio C310X using iGO8, Navteq maps 2010 4Q North America, and the GJ6.18p_da (DVSI & gurjon) skin. I have selected Settings>TC Settings>and checked Precision altitude. The altitude is not displayed.

I did get it for a while with an older map and Gurjon skin. Any clues as how to display it?

Also, is there a way to get the directions spoken earlier or at a greater distance before the turn? ...