• • Do a Backup before attempting any upgrade using windows explorer and always check your bootloader version if it is a 1x bootloader do not go any further consult a member of the TomTom team here first.
  
• Download http://download.tomtom.com/sweet/navcore/9.026.go950_t.CAB-navcore-GO_LIVE.cab and copy the complete contents to your device, overwriting any common files
  
• Download SE_ttsystem.9.026.483454 and copy the ttsystem file to your device overwriting when prompted
  
• Download your required map I will use ...

Hi, i have been posting on gpsunderground, and was about to buy membership to get this sorted, but had a message to try here (cos it's better apparently :P )

anyhoo....i've been trying to get my TT 710 working with the original 1GB SD card, but after 3 seperate posts and some hair pulling, i'm no closer to resolving the problem.

I have since bought an 8GB class 6 SD card and really just need ...

Confused,
Ok I have either really messed up my unit or card or I done somthing to hack my garmin GPSMAP 441s... Why, well here is what I have been testing. In an effort to learn I am doing this and need some help on how to resolve or determie what I have done.

1. Received a garmin SD with VUS010R Southeast Florida v10.50
2. I copied the garmin folder to my laptop
3 Posted ...

The complete locked install has no setup.exe. How is this supposed to be installed? I see the update MSI file - but is that what's supposed to be used? And if so, will it require a pre-existing installation?

Clear Flash tool

Note: This FAQ applies only to devices that connect to TomTom HOME.
If one or more of the following errors occurs, there may be too many files in the flash memory on your navigation device:

• The settings are not saved when you restart your navigation device.
• You cannot activate the map on your navigation device, even though you have a valid product code.
• You have to enter the passkey every time ...

Hi All,

Believe it or not, speed cameras are new to me. Actually it was my first try this morning. I am a bit confused though. Here is my issue. When I drive on the highway here in Belgium, it happens very often that Igo will warn that there is a speed camera even though it is on the street that goes under the highway. That speed camera is not for the highway... And of ...

Ok here is my question...

I have a Garmin 3210 that uses the old garmin cards not sd's. I have 128mb card, the programmer and and two other cards the old jan06 and 04 version bluechart card MUS010R. So i install the programmer and want to be able to read the card and/or update and install a new map on the 128mb card. I am looking for the US400S map but cannot find it at ...

Subject: http://www.navitotal.com/forums/showthread.php?1866-Installing-850.00-card..


Uhm after the map was working i was go to use to device again.
But now i get red screen:

Voices fade.
Few options fail.

What can be done, what should I do now?

My tomtom starts then loads to a white screen with a light blue bar on the bottom.has anybody seen this before .Is my tomtom bricked?
I have tried numerous navcore and all the tricks and tips on this site with no success:
DeviceName=TomTom
DeviceVersionHW=xxxxx
DeviceSerialNumber=xxxx
DeviceUniqueID=AKxxxx
RamDiskVersion=20040301
BootLoaderVersion=5.5138
LinuxVersion=1000
ApplicationVersionVersionNumber=8010

Hello all,

I have a TomTom XL-330S (currently at v8.010), would someone be so kind as to recommend the latest navcore basicpack this unit would be able to accept (a tutorial would be handy, using Keygen 4.1D), and the latest "USA_and_Canada" map I could "test"?