Navman f410

Fri Sep 27, 2013 12:37 pm

romeo_morano wrote:Now, i was able to unlock my navman f410 using dalanik's visual unlock. the device boot nicely, unfortunately i can't run any of the navigation application reflected on the screen.

As a background, the device (navman f410) was bought in dubai, uae with GCC maps. As my project is finished, i returned to the philippines with the device. Definetely, i cannot use the said device in the philippines as it has no philippine map in it. so my intention was to load the device with philippine map. unfortunately, navman company do not have the phillipine map for the device and the support/update for the said device was stopped (based on my direct inquiry with the company).

so my next move is to load the device with new gps application with the philippine map, hence surfing in this site i may get some help.

by the way the gcc and uae maps have each .mcp and .cpf extensions.

any help is greatly appreciated, thanks
RM

If you go to the igo section\sub-section programs, you will find programs that you CAN add and use .fbl maps. Plus the maps you require are available here.

Mon Sep 30, 2013 4:38 am

chas521 wrote:If you go to the igo section\sub-section programs, you will find programs that you CAN add and use .fbl maps. Plus the maps you require are available here.

Hi Chas, thanks for the advice. however when i checked the igo8 section (which i downloaded), it only has the contacts.mscr...note, the download was made together with the visual and MioC520...can you please direct me to the link where i can download the complete igo...
thanks, RM

Mon Sep 30, 2013 12:39 pm

romeo_morano wrote:Hi Chas, thanks for the advice. however when i checked the igo8 section (which i downloaded), it only has the contacts.mscr...note, the download was made together with the visual and MioC520...can you please direct me to the link where i can download the complete igo...
thanks, RM

Not sure what you did since I don't know what you downloaded but here are programs:
http://www.navitotal.com/showthread.php?6880-Igo8-March-16-2011
http://www.navitotal.com/showthread.php?12043-iGo-Primo-2.4-9.6.13-Complete-Torrent
http://www.navitotal.com/showthread.php?13974-Various-Primo-builds-from-mikyhouse55

Tue Oct 01, 2013 5:19 am

chas521 wrote:Not sure what you did since I don't know what you downloaded but here are programs:
http://www.navitotal.com/showthread.php?6880-Igo8-March-16-2011
http://www.navitotal.com/showthread.php?12043-iGo-Primo-2.4-9.6.13-Complete-Torrent
http://www.navitotal.com/showthread.php?13974-Various-Primo-builds-from-mikyhouse55

Hi Chas,
Thanks for the links. I was able to download the Igo8 (both mirror 1 and mirror 2 (x2 parts).
Various Primo builds were already removed from the server (as per the reply from the site), while for the Igo-Primo, I will try to download it later, as the torrent is blocked in our office.

Checking my device, it shows the following;
- Windows CE Ver. 6.00
- Memory: 121,532KB RAM
- Processor type: M1176JZF-S-S5P6443 (don't know what it means)
- My Flash Disk: 1.09GB Used, 2.46GB Free

Programs Installed;
- Visual, Visual.ins and Visual.auto (from Dabor Lanik's project)
- Navigation (Mireo 4.5: original GPS application)

I am not a computer/software literate, but I will try to tinker my device just to make it work here in the Philippines.
If in case the device will work in Igo8, my next task is to find for Philippine map compatible with Igo8.

Thank you very much for the help...
RM

Tue Oct 01, 2013 12:00 pm

What I have for the Philippines http://www.navitotal.com/showthread.php?11744-R3-SEA-content Send a PM to filesupload100 [our uploader] and see if he has later. .fbl map file goes into content\map.

Wed Oct 02, 2013 1:13 am

chas521 wrote:What I have for the Philippines http://www.navitotal.com/showthread.php?11744-R3-SEA-content Send a PM to filesupload100 [our uploader] and see if he has later. .fbl map file goes into content\map.

Chas,
Thank you very much for the help.
My gadget is now working with Igo8 application. Just need some clean-up to free some memory, as per your recommendation in your previous post, on those items that is not needed for the Philippines application.

I did not download the Igo-Primo anymore.

With regards to the Philippine map, yes I visited on the said section and able to download the map. Although it's an old version, I was able to test it last night.

As per your advice, I will inquire to the said uploader if he has the new version.

Again, thank you very much, my Navman F410 (with Mireo application and GCC Map) is now unlocked and running in Igo8.
RM

Thu Nov 21, 2013 12:14 pm

Thanks Remeo and Chas for this post it really help, but my question is the Philippines map is not available on this link any more, is there any other link, thanks

Thu Nov 21, 2013 12:18 pm

As said in the higher posts: send a Pm to the uploader.

Mon Dec 02, 2013 6:25 am

The only version I have for the Philippines is 2011.03 published on 11/04/18 (fbl+poi). It can be downloaded from here:

Hidden Content: This board requires you to be registered and logged-in to view hidden content.

Press reload or refresh after pressing thanks.

password: http://www.navitotal.com

Tue Dec 03, 2013 6:32 am

Thank you so much

Thu Jun 12, 2014 7:25 am

Where can i get a philippine map for my IGO primo?it should be on fbl format.Thanks!!

Thu Jun 12, 2014 8:53 am

Try the iGO map section. maps-buildings-dem-poi-f82/

Thu Jun 12, 2014 9:45 am

Here, but only for 2011.03. No newer map available.

Sun Jun 15, 2014 5:32 am

no, Ididnt findany philippine map.Itried every link but still failure to get.Anymore suggestions?

Wed Jan 07, 2015 10:01 am

The link is broken. May I know where can I download the Philippine map?
Thank you, sir.

Navman f410

Re: Navman f410

Re: Navman f410

Re: Navman f410

Re: Navman f410

Re: Navman f410