Truck Navcore 9.702 Installer, incl. working TMC   

Re: Truck Navcore 9.702 Installer, incl. working TMC

Postby Tazary » Mon Apr 15, 2019 10:33 am

you don't have to activate that with FastActivate.
Tazary offline


Junior Member



 
Joined: Sat Jun 16, 2018 6:34 pm
Posts: 1
Has thanked: 0 time
Been thanked: 0 time

Re: Truck Navcore 9.702 Installer, incl. working TMC

Postby whiskychaser » Tue Apr 23, 2019 7:43 pm

Following issues with the Week Number Rollover, I updated my GO 720 memory to 9.541. Then did a clean install of Truck Navcore 9.702 from the above link onto the SD card. I don't even have a map in the memory but the truck map has not missed a beat in 4 days. And the device has never found satellites so quickly.

Many thanks
whiskychaser offline


Junior Member



 
Joined: Sat Jun 09, 2012 10:56 am
Posts: 7
Has thanked: 0 time
Been thanked: 0 time

Re: Truck Navcore 9.702 Installer, incl. working TMC

Postby whiskychaser » Sat Apr 27, 2019 9:23 am

OK. So it worked fine for a week then stopped finding satellites after being turned off. Running GPSfix from fastactivate resolved the problem.

Could a file be created to run GPSfix at start up?
whiskychaser offline


Junior Member



 
Joined: Sat Jun 09, 2012 10:56 am
Posts: 7
Has thanked: 0 time
Been thanked: 0 time

Re: Truck Navcore 9.702 Installer, incl. working TMC

Postby lesdud » Thu Oct 24, 2019 7:51 am

I have navcore 9.702 on GO750 and GO720. Everything works ok except TMC.
When we drive and the road is closed, the navigation shows that it is closed and it is ok, but when we go the same road, e.g. in a week and the road is actually open and the navigation always shows that the road is still closed. To remove this error in navigation, you must always reset the device to factory settings and then the road that was previously closed becomes open. This problem has been bothering me for at least a year and I have tried different versions of navcore and nothing helps.
And the matter is troublesome because, as the navigation remembers a closed road, it bypasses it every time when planning the next route, although in reality the road is passable.
lesdud offline


Junior Member



 
Joined: Wed Nov 17, 2010 11:58 pm
Posts: 1
Has thanked: 0 time
Been thanked: 0 time

Re: Truck Navcore 9.702 Installer, incl. working TMC

Postby minins » Thu Jan 23, 2020 12:48 pm

Hi

I need Navcore TRUCK for TomTom XL2 Classic because this 9.702 suspends navigation, restarts and freezes

Thanks for the help
minins offline


Junior Member



 
Joined: Mon Feb 22, 2016 11:30 am
Posts: 8
Has thanked: 0 time
Been thanked: 0 time

Re: Truck Navcore 9.702 Installer, incl. working TMC

Postby holyhead » Thu Jan 23, 2020 4:54 pm

minins wrote:Hi

I need Navcore TRUCK for TomTom XL2 Classic because this 9.702 suspends navigation, restarts and freezes

Thanks for the help

Give it a try. We want to hear the result Good or Bad.
[Please Register or Login to download file]
holyhead offline


V.I.P Member



 
Joined: Tue Jan 26, 2010 11:30 am
Posts: 2078
Has thanked: 50 times
Been thanked: 477 times

Re: Truck Navcore 9.702 Installer, incl. working TMC

Postby minins » Fri Jan 24, 2020 4:44 pm

unfortunately you also hang it, is it the microSD card's fault? I have 8 GB
minins offline


Junior Member



 
Joined: Mon Feb 22, 2016 11:30 am
Posts: 8
Has thanked: 0 time
Been thanked: 0 time

Re: Truck Navcore 9.702 Installer, incl. working TMC

Postby holyhead » Fri Jan 24, 2020 5:17 pm

minins wrote:unfortunately you also hang it, is it the microSD card's fault? I have 8 GB

Are you using speedcams ? If so remove them and try again.
holyhead offline


V.I.P Member



 
Joined: Tue Jan 26, 2010 11:30 am
Posts: 2078
Has thanked: 50 times
Been thanked: 477 times

Re: Truck Navcore 9.702 Installer, incl. working TMC

Postby minins » Mon Jan 27, 2020 7:37 am

Holyhead was the fault of speedcams, thanks a lot you are. I have one more problem with keeping the clock in this navigation, when I enter the clock settings and gives synchronize, the time is set but I don't remember it
minins offline


Junior Member



 
Joined: Mon Feb 22, 2016 11:30 am
Posts: 8
Has thanked: 0 time
Been thanked: 0 time

Re: Truck Navcore 9.702 Installer, incl. working TMC

Postby holyhead » Mon Jan 27, 2020 9:07 am

minins wrote:Holyhead was the fault of speedcams, thanks a lot you are. I have one more problem with keeping the clock in this navigation, when I enter the clock settings and gives synchronize, the time is set but I don't remember it

You have a WNRO problem read
tutorials/wnro-gl1-clock-error-sat-fixes-workaround-t21253.html?hilit=wnro
holyhead offline


V.I.P Member



 
Joined: Tue Jan 26, 2010 11:30 am
Posts: 2078
Has thanked: 50 times
Been thanked: 477 times

Re: Truck Navcore 9.702 Installer, incl. working TMC

Postby minins » Mon Feb 10, 2020 11:23 am

In my case, I have TomTom XL IQ Routes ² / XL Classic, just copy the files from the "bin" folder in the original NAVCORE and the clock automatically gets a good time
minins offline


Junior Member



 
Joined: Mon Feb 22, 2016 11:30 am
Posts: 8
Has thanked: 0 time
Been thanked: 0 time

Re: Truck Navcore 9.702 Installer, incl. working TMC

Postby blueping » Sun Feb 23, 2020 10:20 am

Tried this installer on my go live 750, very nicely done installer, with Reggae theme song :P
(funny "I'll be back if you shut down TT)

Unfortunately it freezes up after a few screens or it would be super slow >.<

I just went with Tomtom's default cab file that worked for me as suggested by OP.
I would have liked to try this installer to see if the voice control or any other additional feature worked.

Thanks anyway!
blueping offline


Junior Member



 
Joined: Thu Jul 28, 2011 3:03 pm
Posts: 3
Has thanked: 3 times
Been thanked: 0 time

Re: Truck Navcore 9.702 Installer, incl. working TMC

Postby cid254 » Thu Mar 05, 2020 8:21 pm

Hi,

Does it support GO 700?

BR

cid
cid254 offline


Junior Member



 
Joined: Fri Jan 11, 2013 6:47 pm
Posts: 1
Has thanked: 0 time
Been thanked: 0 time

Re: Truck Navcore 9.702 Installer, incl. working TMC

Postby maa1506 » Wed Apr 29, 2020 8:48 am

Will this navcore work on a GO940 please?
maa1506 offline


Junior Member



 
Joined: Sat Aug 07, 2010 7:24 pm
Posts: 50
Has thanked: 15 times
Been thanked: 0 time

Re: Truck Navcore 9.702 Installer, incl. working TMC

Postby fredderf » Wed Apr 29, 2020 12:28 pm

maa1506 wrote:Will this navcore work on a GO940 please?


Yes, it will
fredderf offline


Administrator



 
Joined: Sun Nov 17, 2013 2:23 pm
Posts: 2961
Location: UK
Has thanked: 575 times
Been thanked: 3622 times

PreviousNext

Return to > Navcores 9 for TomTom Devices

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 3 guests