leontin wrote:I have a question for you. If i put this navcore on my tom tom, the standard car Europe map will work? or only the Europe truck map will work?

There is nothing to be gained by loading Truck navcore 9.700 or 9.701, if you are not going to load the Truck map.

But i need and i want the truck map. but i want the normal car map either and i don't know if they both work on the truck navcore. or the truck map is 2 in 1? both car and truck maps? if so i can choose when i want between them? Thanks in advance and sorry for my english.

It makes no difference what map you use with the Truck Navcore.
But the Truck Navcore is only one supporting the Truck map.
Hope that is clear now ;)

Downunder35m wrote:But the Truck Navcore is only one supporting the Truck map.

To expound just a bit on Downunder's post above this one;

A Truck map has a .meta file & a .tmeta file. The .tmeta file contains the Truck Attributes. Bottom line is that you can run a normal car setup on a Truck map, but you can't run a truck setup on a regular map.

Thanks both of you.it's clear to me now.One more thing to ask you, i saw that are two versions: for devices with 64 mb of ram and 32 mb. I have a TomTom GO 920 with 4GB of internal memory but i don't know how much ram. I don't know where to look for. i have crossed all over the menu but i can't find. i have used even the GetMy-ConFig-v2.53 but nothing. Can you tell where to look for?

leontin wrote:Thanks both of you.it's clear to me now.One more thing to ask you, i saw that are two versions: for devices with 64 mb of ram and 32 mb. I have a TomTom GO 920 with 4GB of internal memory but i don't know how much ram. I don't know where to look for. i have crossed all over the menu but i can't find. i have used even the GetMy-ConFig-v2.53 but nothing. Can you tell where to look for?

ALL of the GO X20, X30, X40 & X50 units have 64MB RAM memories. To see your RAM memory value, do a quick reset, then push & hold the start button until you get a black & white specs screen. RAM memory is in line 6.

Thank you for all your help. Respect for you, guys!

The TT Team sez, "Your are Welcome. Enjoy!!"

it worked like a charm your installer Downunder35m. great job :)

hi
i have a tomtom go 530 and im after the latest truck maps for it if anyone can help
im all new to this so any info welcome !!
if anyone can send me a link to a free download and how to put it on my tomtom
thank

Arftom wrote:hi
i have a tomtom go 530 and im after the latest truck maps for it if anyone can help
im all new to this so any info welcome !!
if anyone can send me a link to a free download and how to put it on my tomtom
thank

Latest Truck Navcore: Navcore 9.700 or 9.701 [b]V8 & V9 Navcores

[/b]Latest Truck Map: Europe_TRUCK v910.4958 [b][color=red]All New Maps 910.XXXX[/color][/b]

SEE UPDATE TO THIS POST BELOW

I'm running the Europe Truck map on the SD card of a Go 750.
I got a normal Europe region on internal memory.

Specs:
DeviceVersionHW=GO 750 LIVE
ApplicationVersionVersionNumber=9701
TTSystem 8260587 bytes, modified 16-08-2013 23:49
BootLoaderVersion=55279
RDS/TMC 'mctx.dat' size 212 bytes
CurrentMap=Europe_TRUCK_910_4958

The problem is that the Truck map freezes (especially after a reset).
Mostly the map will start up and I can go into the menu with five seconds or so delay.

I can run through main menu and option menu okay but when I go to plan a route it mostly freezes.
Sometimes it doesn't but when I want to specify an address sometimes it can not find any cities.
When inputting of a navigation address does work, home addresses, favourites or recent addresses are not saved when rebooting or resetting. Even POI settings are cleared and set to default.

I can switch maps to and fro without a problem.
Right now I made sure to switch to the non-Truck map before resetting it and that worked flawless.
I could switch to the Truck map and that performed okay without hiccups or freezes.

So it seems there's a small inbalance somewhere.
I tried downunder's 9,701 NC (and the 9,700) but that had roughly the same result.
I also reinstalled the Truck map on the SD card but alas to no avail.
I've run disk checks on both internal and card memory.

Any ideas, please?

UPDATE: I made a clean start by emptying the TT and installing downunders NC 9.701 for X50.
It worked and it performed okay.
I just got into problems again when I copied an old mapsettings.cfg from the old map (v. 870 or so).
Could that be the cause of the instability?
I thought these mapsettings could be copied from between maps if they were from the same region?
Is it perhaps different with truck maps? Perhaps due to the vehicle profile?

Mapsetting.cfg seemed to be the problem causing me to spend one day of tinkling with the TT and the truck maps.

I found this old tendriver post dated March, 27 2012:

'oldfogy' wrote: But I found the problem I was having, which turned out to be a faulty 'MapSettings.cfg' file which I was using to transfer my favourites and other configuration settings. Once the (faulty) MapSettings.cfg file was removed the system worked fine and simply re-created another working MapSettings.cfg file.

'tendriver' wrote: For future reference:
1. rebooting after a map update or changes to some map related files like POI's.
It is a common problem caused by the file "mapsettings.cfg" in your map folder.
To get a correct version of this file without loosing your favorites connect your Tomtom to
Tomtom Home and use "operate my Go" to manually add a favorite - you can choose any address you like.
Exit and restart your Tomtom which now has a rewritten "mapsettings.cfg" file.
If everything works fine you can delete the newly added "dummy" favorite.

Just a word of caution and tip to readers of this forum.
Thanks, Tendriver !

Razorblatter wrote:Thanks, Tendriver !

You are Welcome. Enjoy!!

I just installed Downunder's 9.701 truck Navcore (via the universal installer) on a Go 730.

Am I crazy or does this (truck navcore) only support a two panel status bar?
I varied some emulations but I keep having a two panel display and not a three panel display.