combat goofwing wrote:just out of interest why 9051? and will this restore tom tom services?

There is no basik pack for 9.103 and i always reccomend a basickpack for a 32mb device, and i do not like 9.053 either had to correct a lot of peoples units using this navcore 9.051 is just a better all rounder, you will not notice any diffrence between the 3 of them .

And i can not say if tomtom services will be back but if not we will work with it and get it back for you

so to install extratc all the navcore folder to device and the ttsystem and navigotr file fom the ttsystem zip?

well as you can see from my sig now on 9051 and still in the 2nd menu option 2 map correction icons and no tom tom services?

combat goofwing wrote:well as you can see from my sig now on 9051 and still in the 2nd menu option 2 map correction icons and no tom tom services?

run x50 emulation then what do you have ? Read [color="Red"] HERE [/color] for some info on emulation

sorry you have lost me , way over my head i think .
i had tt service running 8010 nav but when i put 9053 on it went

combat goofwing wrote:sorry you have lost me , way over my head i think .
i had tt service running 8010 nav but when i put 9053 on it went

Ok are you using a config folder ??? if not create a file in the root of your device called "[color="Red"]model.txt[/color]" and inside put "[color="Red"]x50[/color]" then save ,

If you are using the config folder check to see if you got the following files in it and what they say inside
"[color="Red"]setconfig.txt[/color]" make shure it says "[color="Red"]model:x50[/color]"
"[color="Red"]cycle.txt"[/color] inside "[color="Red"]x50[/color]"
"[color="Red"]model.txt[/color]" inside "[color="Red"]x50[/color]"

You will then emulate a x50 unit and should get the TomTom Services icon

djc151084 wrote:Ok are you using a config folder ??? if not create a file in the root of your device called "[color="Red"]model.txt[/color]" and inside put "[color="Red"]x50[/color]" then save ,

If you are using the config folder check to see if you got the following files in it and what they say inside
"[color="Red"]setconfig.txt[/color]" make shure it says "[color="Red"]model:x50[/color]"
"[color="Red"]cycle.txt"[/color] inside "[color="Red"]x50[/color]"
"[color="Red"]model.txt[/color]" inside "[color="Red"]x50[/color]"

You will then emulate a x50 unit and should get the TomTom Services icon

dont have a config folder so created a config folder in root of device
in there i have created new text file model.txt that inside says x50

have these in the folder config
setconfig.txt" "model:x50"
"cycle.txt" inside "x50"
"model.txt" inside "x50"


and im now stuck

just noticed as well as 2 map correction icons on the first set of 3 pages of icons i also have 2 help me icons?

I dont see why you are getting 2 of each icon? have you delited everything from your device and started a fresh install instead of overwiting files each upgrade, i reccomend a quik format [SIZE="1"]( even tho some people dont like to format theyer units it has never done mine any harm)[/size] on the drive and starting again and try a few diffrent emulations untill you get the menu right, x10 , x20 , x30 , x40 , x50

combat goofwing wrote:dont have a config folder so created a config folder in root of device
in there i have created new text file model.txt that inside says x50

have these in the folder config
setconfig.txt" "model:x50"
"cycle.txt" inside "x50"
"model.txt" inside "x50"


and im now stuck

just noticed as well as 2 map correction icons on the first set of 3 pages of icons i also have 2 help me icons?

I did a format, installed 9051 and even installed the config folder so it was set for a like this

model:x30
sdid:1
changedtext:TomTom GO 940 LIVE
delgns
delmap
ttsoff
btoff
fmon
fmoff
usesetting
fixtmc
noautooutsource

and i still have no tom tom services and 2 help icons and 2 map corrections icons?

TTSoff = switch TTS off, not for Devices with original TTS
FMon = FMTransmitter on (for x10)
FMoff = switch auto enabled FM by some Emus again off, only for Device without FM, Mp3-Player not more available
btoff = disable BT, if you not need, save then a little more RAM
bton = if you not have BT enable it Button for Speedcams in Menu
noautooutsource = 32MB Device do outsource as Standard, to disable that
delgns = remove (Start,supend) old TMC-Data (gns/gnsdata)
delmap = delete each boot currentmap.dat
cleanflash= delete all from Flash what is possible (*.mac etc.), Settings lost
runcheck = check a few "important" Files, view config.txt for Result
changedtext: = you can change the Text on Status/Info Screen, write your own Text in the File
SDid: = write for each SD/Memory a other Number inside and you can for each use a own different Mainsetting
usesetting= use always Settings from SD, not the in Device itself saved Settings
fixtmc = if your Antenna cant find a Station, (mainly x10)
fixpna = rewrite the broken Map .pna File
model: =see down

djc151084 wrote: [SIZE="2"]( even tho some people dont like to format theyer units it has never done mine any harm)[/size]

It is not a issue of like or not. I've never had a need. If it ain't broke, don't fix it.

ihad some issues with the latest install no icon pictures etc so did a full slow format, then put 9051 back on with no config file and still the same with 2 map correction and help icons

may just leave it likethat as eerything else is working ?

combat goofwing wrote:ihad some issues with the latest install no icon pictures etc so did a full slow format, then put 9051 back on with no config file and still the same with 2 map correction and help icons

may just leave it likethat as eerything else is working ?

Have you got in the setconfig "bton" , like pietu told you in post #40 also you have both fmon + fmoff you can not have both only 1 of these same for bt on and bt off only 1 of these so delite btoff and put bton.

i have since removed that navcore those details were from as i had no icon pictures at all and the device was locking up all the time

i have put 9051 nav core on the device with no config file on but it does have a a text folder and in there is a config file with the following info


Current Emulation: x40
BT: 0
TTS: on
Run in Save RAM Mode

i would like your views on the following, delete all info off the drive and roll it back to my original back up i made before i started adding new navcores, so tom tom services should be on there.
Then install a clean navcore with no patches(if you could suggest the best one for my device 9051 seems to have few issues)then check what options i get before i start patching devices and maps

or just run 9051 as it is now as the unit works fine just no services option

thanks for this help

Ok your BT is off, you need to make a config folder and create a setconfig.txt and inside make shure you have [color="Blue"]bton [/color][color="Red"]AND NO btoff[/color] you should then have the option for services

combat goofwing wrote:i have since removed that navcore those details were from as i had no icon pictures at all and the device was locking up all the time

i have put 9051 nav core on the device with no config file on but it does have a a text folder and in there is a config file with the following info


Current Emulation: x40
BT: 0
TTS: on
Run in Save RAM Mode

i would like your views on the following, delete all info off the drive and roll it back to my original back up i made before i started adding new navcores, so tom tom services should be on there.
Then install a clean navcore with no patches(if you could suggest the best one for my device 9051 seems to have few issues)then check what options i get before i start patching devices and maps

or just run 9051 as it is now as the unit works fine just no services option

thanks for this help