Issue with tomtom go 730

Hello,

I have a issue with my go 730.

In internal memory i have the 9.501 navcore with Iberia Map.

In Sdcard i have Europe truck 925 Map with 9.701 navcore.

On go 730 of my father works fine. But on my 730 don't.

Normaly when i select the map in the Sdcard ( in this csae is the truck map) he automatically change to the navcore in the Sdcard, but he is assuming the navcore of the internal memory.

What can i do to he assume the navcore of the Sdcard????

Thank's

Portuga21 wrote:In Sdcard i have Europe truck 925 Map with 9.701 navcore.
On go 730 of my father works fine. But on my 730 don't.

If you are testing the same SD card in both 730s, remember that a map must be re-patched when moving it from one 730 to the other 730.

tendriver wrote:

Portuga21 wrote:In Sdcard i have Europe truck 925 Map with 9.701 navcore.
On go 730 of my father works fine. But on my 730 don't.

If you are testing the same SD card in both 730s, remember that a map must be re-patched when moving it from one 730 to the other 730.

Yes i have re-patched the map.

In my mind a device like the Go 730 always boots with navcore on internal memory but you are capable of choosing map on sd card.
In this case you would need truck navcore on internal memory.

Razorblatter wrote:In my mind a device like the Go 730 always boots with navcore on internal memory but you are capable of choosing map on sd card.
In this case you would need truck navcore on internal memory.

I put the truck navcore in the internal memory and the device don't start.

It apear the bar of loading the sd card and the internal memory and don't star.

Stay in loop .

You have to supply additional info about your current setup and about your actual actions with what files.

Razorblatter wrote:In my mind a device like the Go 730 always boots with navcore on internal memory but you are capable of choosing map on sd card.

You might get your mind re-programed. The GO 730 defaults to a SD card, if the card has a navcore on it!!

Portuga21 wrote:I put the truck navcore in the internal memory and the device don't start.

Are you using a SDHC card that is 4GB or larger. If so, is your bootloader 5.5012 or higher?

tendriver wrote:

Portuga21 wrote:I put the truck navcore in the internal memory and the device don't start.

Are you using a SDHC card that is 4GB or larger. If so, is your bootloader 5.5012 or higher?

I'm using a SDHC 4Gb with 9.701 navcore and 925 truck map.
The Bootloader is 55244.
See the image. [Please Register or Login to download file]
Like you can see in the image the device is assuming the navcore os internal memory. Not the navcore of SD card.

Portuga21 wrote:I'm using a SDHC 4Gb with 9.701 navcore and 925 truck map.

Are you 100% certain that 9.701 is patched?? If so, have you tried the current truck navcore, 9.702?

tendriver wrote:

Portuga21 wrote:I'm using a SDHC 4Gb with 9.701 navcore and 925 truck map.

Are you 100% certain that 9.701 is patched?? If so, have you tried the current truck navcore, 9.702?

Yes I'm 100% certain that i have patch the navcore.

I try the 9.702 and it's the same. Is assuming the 9.501 of the internal memory.

You could try to keep all folders, remove all files from device root and install the truck navcore.
Possibly you've got one or more erroneous files left.

I assume you have sufficient knowledge otherwise make a full backup beforehand.

Portuga21 wrote:Yes I'm 100% certain that i have patch the navcore

Have you tried putting 9.701 on the internal? If not, please do so. If it boots, we can rule out 9.701 being the problem. If it does't boot, please advise & sit tight. I have a couple of ideas.

maybe tendriver will correct me , but if your sd card has navcore 9.701 and truck maps and ttgo bif file on it, then connecting to tomtom home using a card reader, tomtom home will want to update your navcore to 9.702, which should be glitch free. if tthome doesent recognise your navcore 9.701 then i would think it may be corrupt.

dieselman wrote:maybe tendriver will correct me

And then again, maybe not. Post 13 & 14 should have the same end results. They are just taking different paths to get there.