Hope someone can help.

I have an Xtrons D710G 800x480 that runs Wince5 and not sure how much memory this unit has. Igo Primo 1.2 and loads fine. It calculates if i go to an address but as soon as i click on the map i get out of memory errors and it closes. I dont have any DC, dem, poi's or even speed cameras loaded as i deleted the files. Voice is just got 2 in there and Europe maps. I have messed about with the memory settings and cache in sys.txt but after 3 days now i am asking for help

Has anyone got it working on the XTRONS Primo 1.2 or any other verion. If so could you share there sys.txt file and the IGO software version

Thanks

Brian

brian colston wrote:Hope someone can help.

I have an Xtrons D710G 800x480 that runs Wince5 and not sure how much memory this unit has. Igo Primo 1.2 and loads fine. It calculates if i go to an address but as soon as i click on the map i get out of memory errors and it closes. I dont have any DC, dem, poi's or even speed cameras loaded as i deleted the files. Voice is just got 2 in there and Europe maps. I have messed about with the memory settings and cache in sys.txt but after 3 days now i am asking for help

Has anyone got it working on the XTRONS Primo 1.2 or any other verion. If so could you share there sys.txt file and the IGO software version

Thanks

Brian

First of all, welcome Brian. We're here to help if we can. Also, we have the most knowledgeable members so expect some answers. You've done the most important thing when it comes to memory errors and that is to reduce your content. Plus you tried to increase your memory cache in the sys.txt. So now my question is this. Did you ever have another successful nav on your device?

BTW, you have 64MB RAM.

chas521,

Thanks for the warm welcome and nice to be here

I just tried and removed the sys.txt, save folder, and same as first post

The unit comes with sygic drive 10 and works fine. its just i find the software and maps rubbish. I have always used TOMTOM or IGO and would like to get IGO working on my system if possible.

Thanks again

Brian

brian colston wrote:chas521,

Thanks for the warm welcome and nice to be here

I just tried and removed the sys.txt, save folder, and same as first post

The unit comes with sygic drive 10 and works fine. its just i find the software and maps rubbish. I have always used TOMTOM or IGO and would like to get IGO working on my system if possible.

Thanks again

Brian

It's obvious that you have a good working knowledge of your GPS since you installed Primo 1.2. I think you got a bad download or something like that. I uploaded this yesterday and it works 110%. You might want to give it a try instead.

http://www.navitotal.com/forums/showthread.php?5500-November-Primo-1.1-from-my-device

Chas521,

Thanks again for the help. I have download Primo 1.1 from the link and the data file does not have support for 800x480 so can i use the 1.2 data.zip that i have or do i need to get an 800x480 for 1.1

Again thanks a lot for all your help

ok i got the formated the SD card and started a fresh with the downloaded files and the only thing i have added is my uk and ireland maps. all work as before and then again out of memory error. i used the sys.txt file included in the one with the software

crash logs as follows :

Current System time: "2011-04-26 18:49:51"
Build version: 8.5.11.168090
Build configuration: Product--ARCHFAM
OS version: 5.0

Uptime: 16598 h 48 m 39 sec 0 msec

Memory Stats:

FreeMemory: 0 MB, 300 KB, 0 B
TotalUseableMemory: 22 MB, 356 KB, 0 B
MaxMemory: 129 MB, 0 KB, 0 B
ReservedMemory: 0 MB, 0 KB, 0 B
LastRequestSize: 0 MB, 682 KB, 688 B
ActualCacheSize: 0 MB, 0 KB, 440 B
GarbageSize: 0 MB, 0 KB, 0 B

Reserve used at OOM 1 time(s) for 0 ms, Sum req. mem: 2796208
OOMSurviveTime: 0 h 0 m 0 sec 99 msec





WinCE CallStack snapshot (function names unknown - map file \StorageCard\Primo\IGO.map not found):

0x0a6d2328 (A)
0x0a6d1980 (A)
0x0a6d1b38 (A)
0x0a01ba5c (A)
0x0a01c00c (A)
0x0a01cf34 (A)
0x0a69f45c (A)
0x0a69f318 (A)
0x0a69e764 (A)
0x0a68d50c (A)
0x0a69e614 (A)
0x0a27e370 (A)
0x0a242ec0 (A)
0x0a25faa8 (A)
0x0a6fe4d4 (A)
0x0a6fd9b4 (A)
0x0a1f3888 (A)
0x0a4cc3b4 (A)
0x0a0403a0 (A)
0x0a03f668 (A)
0x0a03f1fc (A)
0x0a04121c (A)
0x0a042150 (A)
0x0a51d640 (A)
0x0a519ed4 (A)
0x0a51a1c4 (A)
0x0a54b758 (A)
0x03f8dcf8 (A)


Error message:

Out of memory.
Requested: 699056
Cache: 440


Global status:

bInFocus: 1
bMouseDown: 0
bInLogic: 1
bInRender: 0
CurrentState[128]: st_EasyNav
GPS Pos: (0.000000,0.000000)
Camera: pos:(0.221000,51.384467) rot:1069 persp:7000 zoom:96.000000 eng=2)


State queue:

0. st_MainMenu
1. st_EasyNav


Waypoints:



Route Parameters:

Vehicle type: Car
Planning method: Fastest
User pref. mask: 0xEDE
Correctness: 80
User u-turn penalty: 3000


Maps:

map\Basemap.fbl ver:0x02d6 time:0x4b277198 cid:536362529
map\Basemap.fbl ver:0x02d6 time:0x4b277198 cid:536370721
map\Basemap.fbl ver:0x02d6 time:0x4b277199 cid:536378913
map\Basemap.fbl ver:0x02d6 time:0x4b27719a cid:536387105
map\Basemap.fbl ver:0x02d6 time:0x4b27719b cid:536395297
map\Basemap.fbl ver:0x02d6 time:0x4b27719b cid:536403489
map\Basemap.fbl ver:0x02d6 time:0x4b27719c cid:536411681
map\Basemap.fbl ver:0x02d6 time:0x4b27719d cid:536419873
map\Basemap.fbl ver:0x02d6 time:0x4b2771a1 cid:536428065
map\Basemap.fbl ver:0x02d6 time:0x4b2771a2 cid:536436257
map\Basemap.fbl ver:0x02d6 time:0x4b2771a4 cid:536444449
map\Basemap.fbl ver:0x02d6 time:0x4b2771a5 cid:536452641
map\Basemap.fbl ver:0x02d6 time:0x4b2771a5 cid:536460833
map\Basemap.fbl ver:0x02d6 time:0x4b2771a6 cid:536469025
map\Basemap.fbl ver:0x02d6 time:0x4b2771a7 cid:536477217
map\Basemap.fbl ver:0x02d6 time:0x4b2771aa cid:536485409
map\Basemap.fbl ver:0x02d6 time:0x4b2771ab cid:536493601
map\Basemap.fbl ver:0x02d6 time:0x4b2771ac cid:536501793
map\Basemap.fbl ver:0x02d6 time:0x4b2771ac cid:536509985
map\Basemap.fbl ver:0x02d6 time:0x4b2771ad cid:536518177
map\Basemap.fbl ver:0x02d6 time:0x4b2771b1 cid:536526369
map\Basemap.fbl ver:0x02d6 time:0x4b2771b8 cid:536534561
map\Basemap.fbl ver:0x02d6 time:0x4b2771ba cid:536542753
map\Basemap.fbl ver:0x02d6 time:0x4b2771ba cid:536550945
map\Basemap.fbl ver:0x02d6 time:0x4b2771bb cid:536559137
map\Basemap.fbl ver:0x02d6 time:0x4b2771bb cid:536567329
map\Basemap.fbl ver:0x02d6 time:0x4b2771bc cid:536575521
map\Basemap.fbl ver:0x02d6 time:0x4b2771bd cid:536583713
map\Basemap.fbl ver:0x02d6 time:0x4b2771c1 cid:536591905
map\Basemap.fbl ver:0x02d6 time:0x4b2771c3 cid:536600097
map\Basemap.fbl ver:0x02d6 time:0x4b2771c4 cid:536608289
map\Basemap.fbl ver:0x02d6 time:0x4b2771c5 cid:536616481
map\Ireland_83_TA_2010.12_110210.fbl ver:0x02e1 time:0x4d53eb3a cid:9970224
map\Ireland_83_TA_2010.12_110210.fbl ver:0x02e1 time:0x4d53eb3a cid:9978416
map\United_Kingdom_83_TA_2010.12_110210.fbl ver:0x02e1 time:0x4d53eb38 cid:7348784
map\United_Kingdom_83_TA_2010.12_110210.fbl ver:0x02e1 time:0x4d53eb38 cid:7365168
map\United_Kingdom_83_TA_2010.12_110210.fbl ver:0x02e1 time:0x4d53eb38 cid:7373360
map\United_Kingdom_83_TA_2010.12_110210.fbl ver:0x02e1 time:0x4d53eb38 cid:7389744
map\United_Kingdom_83_TA_2010.12_110210.fbl ver:0x02e1 time:0x4d53eb39 cid:7455280
map\United_Kingdom_83_TA_2010.12_110210.fbl ver:0x02e1 time:0x4d53eb39 cid:7463472
map\United_Kingdom_83_TA_2010.12_110210.fbl ver:0x02e1 time:0x4d53eb39 cid:7471664
map\United_Kingdom_83_TA_2010.12_110210.fbl ver:0x02e1 time:0x4d53eb39 cid:7479856
map\United_Kingdom_83_TA_2010.12_110210.fbl ver:0x02e1 time:0x4d53eb39 cid:7397936


--------------------- LUA stack ----------------------


Lua stack[ 0] :
Lua stack[ 1] :
Lua stack[ 2] :
Lua stack[ 3] :
Lua stack[ 4] :
Lua stack[ 5] :
Lua stack[ 6] :
Lua stack[ 7] :
Lua stack[ 8] :
Lua stack[ 9] :
Lua stack[10] :
Lua stack[11] :
Lua stack[12] :
Lua stack[13] :
Lua stack[14] :

------------------- Crash Log End --------------------
------------------------------------------------------
------------------------------------------------------

thanks again and sorry for being a pain

Thanks

Brian

This thread discusses Primo and out of memory errors...

brian colston wrote:ok i got the formated the SD card and started a fresh with the downloaded files and the only thing i have added is my uk and ireland maps. all work as before and then again out of memory error. I used the sys.txt file included in the one with the software.
Thanks again and sorry for being a pain

Thanks

Brian

First of all again, Brian, you're not a pain so don't even go there! Yes to using the sys.txt in the download. How did you install the 1.1?

FatboyFun,
thanks for your help, but no help as been throught most of this site about out of memory errors

chas521,

Thanks :)

I downloaded from the link you gave me and formated my SD card so nice and clean.

1) Extracted files to SD card (so had one folder called Primo and all the files under that)
2) copied my new 1.1 data.zip that supported my 800x480 as the one that come with it did not support my screen size )
3) copied 4 maps to \Primo\content\map
Ireland_83_TA_2010.12_110210.fbl
Ireland_83_TA_2010.12_110210_(TI).ftr
United_Kingdom_83_TA_2010.12_110210.fbl
United_Kingdom_83_TA_2010.12_110210_(TI).ftr

put SD in car and went throught the setup fine. all worked ok and fast at this point. clicked on map and then got out of memory error as i was getting in my first post

Dont think i will ever get this thing working

Thanks again

Brian

Yes you will get an iGO nav to work. Here's my iGO 8.3 http://www.navitotal.com/forums/showthread.php?1837-Working-iGO-8.3-from-my-device My C320 has 64MB RAM also so I know it works!

[color=red]I shouldn't have to say this but I hope that you backed everything up before editing!!![/color] I saw on your device that you press a GPS button to start your nav [Sygic]. What about if you could change the path to iGO instead of Sygic or did you do this already?

chas521 wrote:[color="red"]I shouldn't have to say this but I hope that you backed everything up before editing!!![/color] I saw on your device that you press a GPS button to start your nav [Sygic]. What about if you could change the path to iGO instead of Sygic or did you do this already?

Chas521,

yes i had to change the path for the GPS button so IGO would launch. will download 8.3 and see if that works and thanks again for all your time

Brian

brian colston wrote:Chas521,

yes i had to change the path for the GPS button so IGO would launch. will download 8.3 and see if that works and thanks again for all your time

Brian

I knew you knew to try it that way. My time is yours so don't be too nice LOL

Just had another thought Brian. I just hope that it doesn't die of loneliness. HEY!! I can make a joke about me. I'm not sure that it's hurting but it might be causing a map memory problem. In content\map ONLY put in the .fbl files and not anything else. Just to see what happens.
Also delete the save folder. Also, make sure that you change the resolution in the sys.txt.

EDIT: Read this to see how good my Primo 1.1 is http://www.navitotal.com/forums/showthread.php?5498-iGO-Primo-1.2-speedcams-not-working-%28

May I suggest a change in sys.txt:

[debug]
cache=2048
skip_eula=1
reserve_memory=1500000

By adding "reserve_memory" is set to 1,5 MB, iGO leaves 1,5 MB available memory unused.
Without this setting, iGO will leave 4 MB. This causes a "memory full" message.
You could set it to 2MB as well, or possibly 2.5MB.
The "cache" set to 2048 will leave a bit more memory for iGO itself for calculations.

Hope this helps.