Forum- Contact •
- FAQ •
- Register •
- Login
- View unanswered posts • View active topics
-
Board index ‹ PDA/PNA Navigation ‹ iGO, MioMap and other ‹ General Discussions about iGO core
sound issue with iGo primo
22 posts
• Page 2 of 2 • 1, 2
by nabi » Sun Aug 15, 2010 12:46 pm
Dan is het wachten op een Nederlandse stem ;)
________________________________________________________________________
When I do good, no one remembers, when I do wrong, no one forgets.
I am in a permanent state of inactivity
I won't answer to any PM, so don't send me any
When I do good, no one remembers, when I do wrong, no one forgets.
I am in a permanent state of inactivity
I won't answer to any PM, so don't send me any
by kamoteka » Sun Aug 15, 2010 3:29 pm
Ton wrote:I try to get tts nuance working with primo 1.1 but unfortunately I have not been able to find Dutch voices for tts_nua_v5.
I do have a dutch female voice (v_tts_nu_dut_nl_f4_laura.zip) but that doesn' t wordt with the tts_nua_v5.
I think it is because in the info.ini file it reads voicekey="tts_nuance_3".
Is there a way to work around this by either using the files that come with tts_nua_v3 (which I don't have !) or by editing the female voice file that works with tts_nua_v3 ?
Suggestions are appreciated !
Do you actually have the Dutch TTS Nuance V5 engine ? If so, and you have a TTS Nuance V3 voice, open the zip voice file and modify the info.ini file add the line :
tts_engine="nuance_v5"
If above line exist but with different value (e.g. =nuance_v3) replace it as in above.
by Ton » Sun Aug 15, 2010 3:45 pm
Kamoteka,
the info.ini file reads as follows:
[INFO]
voicekey="tts_nuance_3"
languagekey="dutch"
languagename="Dutch (NL) TTS"
lang_extention_flag="NL"
sex="female"
name="Laura TTS"
flag="flag_dut.bmp"
testsound="\vol=100\ Hoi Hendrik, rijdt voorzichtig!"
unitssup_kmm=1
unitssup_mly=1
unitssup_mlf=1
tmcsup=1
ttsvoice=3
tts_rate=45
tts_langname="Dutch"
tts_voicename="Laura"
r2l=0
recalulate="\vol=100\ Nieuwe \pause=80\ berekening."
;;recalulate=""
ask_recalulate="\vol=100\ Opnieuw berekenen?"
offroute="\vol=100\ Van de route."
traffic_jam="\vol=100\ File \pause=80\ op uw route."
overspeed="\vol=100\ Hendrik je rijdt te hard!"
gps_signal_lost="\vol=100\ GPS signaal te zwak."
gps_disconnect="\vol=100\ GPS verbinding verbroken."
;<esc>\Mrk=????
;<esc>\vol=0 to 80 to 100\ vol 0 to 100 to 200% 2x (+6dB)
;<esc>\rate=1 to 50 to 100\ -50 to 100 to +250%
;<esc>\pitch=????
;<esc>\pause=50\ msecs
;<esc>\tn=spell\
;<esc>\tn=normal\
As you notice, there is no line that refers to the tts engine. Should I just insert the line tts_engine="nuance_v5" as you suggest, and thus is matter where to put it in the file ?
THX/Ton
the info.ini file reads as follows:
[INFO]
voicekey="tts_nuance_3"
languagekey="dutch"
languagename="Dutch (NL) TTS"
lang_extention_flag="NL"
sex="female"
name="Laura TTS"
flag="flag_dut.bmp"
testsound="\vol=100\ Hoi Hendrik, rijdt voorzichtig!"
unitssup_kmm=1
unitssup_mly=1
unitssup_mlf=1
tmcsup=1
ttsvoice=3
tts_rate=45
tts_langname="Dutch"
tts_voicename="Laura"
r2l=0
recalulate="\vol=100\ Nieuwe \pause=80\ berekening."
;;recalulate=""
ask_recalulate="\vol=100\ Opnieuw berekenen?"
offroute="\vol=100\ Van de route."
traffic_jam="\vol=100\ File \pause=80\ op uw route."
overspeed="\vol=100\ Hendrik je rijdt te hard!"
gps_signal_lost="\vol=100\ GPS signaal te zwak."
gps_disconnect="\vol=100\ GPS verbinding verbroken."
;<esc>\Mrk=????
;<esc>\vol=0 to 80 to 100\ vol 0 to 100 to 200% 2x (+6dB)
;<esc>\rate=1 to 50 to 100\ -50 to 100 to +250%
;<esc>\pitch=????
;<esc>\pause=50\ msecs
;<esc>\tn=spell\
;<esc>\tn=normal\
As you notice, there is no line that refers to the tts engine. Should I just insert the line tts_engine="nuance_v5" as you suggest, and thus is matter where to put it in the file ?
THX/Ton
by chas521 » Mon Aug 16, 2010 2:58 am
nabi wrote:Dan is het wachten op een Nederlandse stem
Say what? English only - but you know that.
If it ain't broke don't fix it!
ALWAYS BACK-UP YOUR FILES/FOLDERS BEFORE MAKING EDITING CHANGES!
Please do NOT post any thanks. Simply press the hand icon with the "thumb up" which is the thank you button.
ALWAYS BACK-UP YOUR FILES/FOLDERS BEFORE MAKING EDITING CHANGES!
Please do NOT post any thanks. Simply press the hand icon with the "thumb up" which is the thank you button.
by nabi » Mon Aug 16, 2010 7:36 am
Extra service for the members ;)
________________________________________________________________________
When I do good, no one remembers, when I do wrong, no one forgets.
I am in a permanent state of inactivity
I won't answer to any PM, so don't send me any
When I do good, no one remembers, when I do wrong, no one forgets.
I am in a permanent state of inactivity
I won't answer to any PM, so don't send me any
by kamoteka » Mon Aug 16, 2010 6:52 pm
Ton wrote:As you notice, there is no line that refers to the tts engine. Should I just insert the line tts_engine="nuance_v5" as you suggest, and thus is matter where to put it in the file ?
THX/Ton
Yes, but remember, this will not work if you do not have the Dutch TTS Nuance V5 engine.
by chas521 » Mon Aug 16, 2010 8:16 pm
kamoteka wrote:Yes, but remember, this will not work if you do not have the Dutch TTS Nuance V5 engine.
Appreciate your help kamoteka - thanks.
If it ain't broke don't fix it!
ALWAYS BACK-UP YOUR FILES/FOLDERS BEFORE MAKING EDITING CHANGES!
Please do NOT post any thanks. Simply press the hand icon with the "thumb up" which is the thank you button.
ALWAYS BACK-UP YOUR FILES/FOLDERS BEFORE MAKING EDITING CHANGES!
Please do NOT post any thanks. Simply press the hand icon with the "thumb up" which is the thank you button.
22 posts
• Page 2 of 2 • 1, 2
Return to General Discussions about iGO core
-
- Related topics
- Replies
- Views
- Last post
-
- igo primo no sound
by rbaker91 » Thu Feb 05, 2015 11:40 pm - 1 Replies
- 1945 Views
- Last post by chas521
Fri Feb 06, 2015 12:15 am
- igo primo no sound
-
- Igo Primo speedcam sound help
1, 2by alex1986 » Tue Apr 26, 2011 4:05 pm - 20 Replies
- 8423 Views
- Last post by chas521
Thu Apr 28, 2011 12:37 pm
- Igo Primo speedcam sound help
-
- igo primo sound problem
by shay2040 » Tue Feb 03, 2015 7:50 am - 2 Replies
- 2346 Views
- Last post by Yuk
Wed Apr 29, 2015 2:31 pm
- igo primo sound problem
-
- Igo Primo Android No Sound At all.
1, 2by nitinule » Fri Aug 17, 2012 6:13 pm - 23 Replies
- 16738 Views
- Last post by nitinule
Sun Aug 26, 2012 10:00 am
- Igo Primo Android No Sound At all.
Who is online
Users browsing this forum: No registered users and 3 guests
News
Site map
SitemapIndex
RSS Feed
