Forum- Contact •
- FAQ •
- Register •
- Login
- View unanswered posts • View active topics
-
Board index ‹ PDA/PNA Navigation ‹ iGO, MioMap and other ‹ General Discussions about iGO core
Sony nav-u 92
40 posts
• Page 2 of 3 • 1, 2, 3
by Zeppelin » Mon May 16, 2011 8:27 am
I think you will need to have "mounted volume" on your device, and inside "mounted volume" you should put the igo and amended sony files- the original Sony file in mounted volume should be renamed. Or if you are keeping the original sony file the nav-u file inside has to be renamed. You will probably then have to add a map and languages to the igo file to make it work. Without "mounted volume" many of the loading paths will not run as they include something like \mounted volume\igo\igo.exe
I found that you have to use xp with active sync, as win 7 and win mobile will not copy all the .exe files.
If you can no longer get your unit to connect to your pc, you will have to play around a bit, i.e. connect and re set device, start device then connect to pc etc.
I found that you have to use xp with active sync, as win 7 and win mobile will not copy all the .exe files.
If you can no longer get your unit to connect to your pc, you will have to play around a bit, i.e. connect and re set device, start device then connect to pc etc.
by Zeppelin » Mon May 23, 2011 2:04 pm
Back up all your files.
This worked for me
[Please Register or Login to download file]
Download and unrar the above file.
Link sony to computer using active sync and win xp.
Rename "sony" file in mounted volume on your device to anything you want.
Copy Primo folder into mounted volume on your device
Inside the downloaded gps platform folder are 2 files you need. I is the "menu" and the other "sony"
Copy both these files into mounted volume.
You should have 4 files now in the mounted volume- Primo, menu, sony and 'renamed sony'. ( You man need to unhide folders by going to tools>folder options>view and checking 'show hidden folders; in order to see the sony files)
In the nav-u mscr file for the sony 93 the figures you need are 18 and 15. Most other models i believe are 19 and 17.
The 93 is 480X272 if your screen is different you need to chang sys.txt
This should be the only things you may need to edit
You will need to put your own maps in.
Reset device and try!
As i said at begining this worked for me, but make sure you back up your device in case you need to go back
This worked for me
[Please Register or Login to download file]
Download and unrar the above file.
Link sony to computer using active sync and win xp.
Rename "sony" file in mounted volume on your device to anything you want.
Copy Primo folder into mounted volume on your device
Inside the downloaded gps platform folder are 2 files you need. I is the "menu" and the other "sony"
Copy both these files into mounted volume.
You should have 4 files now in the mounted volume- Primo, menu, sony and 'renamed sony'. ( You man need to unhide folders by going to tools>folder options>view and checking 'show hidden folders; in order to see the sony files)
In the nav-u mscr file for the sony 93 the figures you need are 18 and 15. Most other models i believe are 19 and 17.
The 93 is 480X272 if your screen is different you need to chang sys.txt
This should be the only things you may need to edit
You will need to put your own maps in.
Reset device and try!
As i said at begining this worked for me, but make sure you back up your device in case you need to go back
by Zeppelin » Tue May 31, 2011 8:55 pm
I haven´t tried the TMC, mainly because I know its difficult to get it working. One of the problems is getting Primo to recognize the TMC receiver on the Sony. You could try googling or seachin here for "Tmc Gns driver", which i think acts as an interface between the two.
by mirceanewus » Sat Jun 11, 2011 7:27 am
I`ve been trying to install any other navigation for 2 months and I don't know what to do.... Please, can anyone help me?
-
mirceanewus
offline
- Joined: Tue Jun 07, 2011 12:32 pm
- Posts: 7
- Has thanked: 2 times
- Been thanked: 0 time
by jony » Tue Jun 14, 2011 11:40 am
Hello all,
I have a Sony NAV-U 92 TC. I tried to install Igo8 on it but no luck. I copied the files for Igo in the \Mounted Volume folder, copied the updated maps, kept the folder structure as required, renamed the nav-u.exe file from the \Sony directory to nav-u2.exe. The only problem was that I did not find any nav-u.mscr file. Can anyone tell me in what folder I can find this file?
I have a Sony NAV-U 92 TC. I tried to install Igo8 on it but no luck. I copied the files for Igo in the \Mounted Volume folder, copied the updated maps, kept the folder structure as required, renamed the nav-u.exe file from the \Sony directory to nav-u2.exe. The only problem was that I did not find any nav-u.mscr file. Can anyone tell me in what folder I can find this file?
-
jony
offline
- Joined: Tue Jun 14, 2011 10:56 am
- Posts: 2
- Has thanked: 0 time
- Been thanked: 0 time
by mirceanewus » Tue Jun 14, 2011 4:44 pm
jony wrote:Hello all,
I have a Sony NAV-U 92 TC. I tried to install Igo8 on it but no luck. I copied the files for Igo in the \Mounted Volume folder, copied the updated maps, kept the folder structure as required, renamed the nav-u.exe file from the \Sony directory to nav-u2.exe. The only problem was that I did not find any nav-u.mscr file. Can anyone tell me in what folder I can find this file?
hi Jony , if you wont the mscr file from my sony send me an email to [color="red"]{deleted}[/color]
[color="red"]Not a good idea to post an e-mail address in a public forum. Use private messages instead.--YT[/color]
-
mirceanewus
offline
- Joined: Tue Jun 07, 2011 12:32 pm
- Posts: 7
- Has thanked: 2 times
- Been thanked: 0 time
by Zeppelin » Wed Jun 15, 2011 10:05 am
If you look in the sony> navu folder there should be 2 navu-u files. If you look to the right of these one should say 'application' the other 'mscr'. mscr can be opened with notebook.
@joney If you are using my instructions from previous post you need to rename the whole of the sony folder, as a new sony file is included in my download, to see this file you need to have 'show hidden file and folders' checked in tools>folder options>view
@joney If you are using my instructions from previous post you need to rename the whole of the sony folder, as a new sony file is included in my download, to see this file you need to have 'show hidden file and folders' checked in tools>folder options>view
-
mirceanewus
offline
- Joined: Tue Jun 07, 2011 12:32 pm
- Posts: 7
- Has thanked: 2 times
- Been thanked: 0 time
by Fatboyfun » Wed Jun 15, 2011 4:46 pm
Here is the nav-u.mscr file...
Copy("\Mounted Volume\Sony\nav-u\MortScript.exe","\Windows\MortScript.exe")
Copy("\Mounted Volume\Sony\nav-u\toolhelp.dll","\Windows\toolhelp.dll")
Copy("\Mounted Volume\Sony\nav-u\TestMode.exe","\Windows\TestMode.exe")
Copy("\Mounted Volume\Sony\nav-u\PowerOn.mscr","\Windows\PowerOn.mscr")
RunOnPowerOn ("\Windows\MortScript.exe","\Windows\PowerOn.mscr")
RunWait("\Mounted Volume\Sony\nav-u\ToolDevice.exe","off 18")
RunWait("\Mounted Volume\Sony\nav-u\ToolDevice.exe","off 15")
RunWait("\Mounted Volume\Sony\nav-u\ToolDevice.exe","on Serial")
Run ("\Windows\TestMode.exe")
Sleep (50)
Kill ("TestMode.exe")
RegWriteBinary("HKLM","Time","TimeZoneInformation","c4ffffff52006f006d0061006e006300650020005300740061006e0064006100720064002000540069006d0065000000000000000000000000000000000000000000000000000a000000050003000000000000000000000052006f006d0061006e006300650020004400610079006c0069006700680074002000540069006d0065000000000000000000000000000000000000000000000000000300000005000200000000000000c4ffffff")
Run ("\Windows\ctlpnl.exe","cplmain.cpl,13")
WaitFor ("Date/Time Properties",5000)
SendTab ("Date/Time Properties")
SendTab ("Date/Time Properties")
SendDown ("Date/Time Properties")
SendDown ("Date/Time Properties")
SendUp ("Date/Time Properties")
SendCR ("Date/Time Properties")
#Con esto modificamos una entrada del registro de WinCe para corregir la zona horaria a GMT+1 Madrid
While (TRUE)
RunWait ("\Mounted Volume\iGO8\iGO8.exe")
PowerOff
EndWhile
#Este bucle infinito esta pendiente de que siempre se este ejecutando el miomap, si salieramos del miomap
#pondriamos el GPS en Standby (suspender) hasta que le dieramos al boton power del GPS, entonces volveria
#a arrancar el miomap.
Currently sleeping...
by mirceanewus » Wed Jun 15, 2011 4:50 pm
Zeppelin wrote:If you look in the sony> navu folder there should be 2 navu-u files. If you look to the right of these one should say 'application' the other 'mscr'. mscr can be opened with notebook.
@joney If you are using my instructions from previous post you need to rename the whole of the sony folder, as a new sony file is included in my download, to see this file you need to have 'show hidden file and folders' checked in tools>folder options>view
Zeppelin,please can you tell me what I nedd to modify in mscr file to be able to use another soft that can run from my MemoryStick? I use Fatboyfun Mobile navigator but any soft that I install wont find GPS signal.... Thank You
-
mirceanewus
offline
- Joined: Tue Jun 07, 2011 12:32 pm
- Posts: 7
- Has thanked: 2 times
- Been thanked: 0 time
40 posts
• Page 2 of 3 • 1, 2, 3
Return to General Discussions about iGO core
Who is online
Users browsing this forum: No registered users and 8 guests
News
Site map
SitemapIndex
RSS Feed
