thanks,
finally it is UP with few glitches
program-data-zip-branding-zip-license-f83/igo-primo-complete-torrent-t12043.html
i copied above package to my 16gb SD card and it's working fine with my NX-501
1) issue i had is no beep sound while i touch screen menu (the sound was there it worked only first time when it started ) after couple of time i booted it dosen't
i check sound and voice menu everything is OK..volume if full UP..but still no beep sound
2) there is no full reset (factory reset) OR i can't find it where i can ??

today i will check deep and update

thanks again to everyone !! this forum is great ..i have now extra SD card as a spare

The factory reset in iGO8 and Primo is : delete (or rename) the save folder.
The beep sound when touching the screen is a volume setting. Did you change the (key) volume?

thanks for reply,
i did everything the volume is full UP..for everything..but still no luck..no beep sound
every time i start the car, it load IGO/navigation on display , but in original SD card normally is RADIO ,only if i press button AV <=> NAVI then it display change to navigation
so what i suppose to change in system config.txt ?? to start radio normally when power up

thanks in advance help appriciated

What changes in system.config.txt? Is that a Clarion file?
I don't know? What is in it now?

About Primo:
Are these lines in Primo sys.txt?

[debug]
max_memory = 134217728
reserve_memory = 16777216

[gps]
port=1
baud=38400

[map]
auto_nightmode_uses_gpstime_first=1

[rawdisplay]
highres=0
screen_x=800
screen_y=480

[sound]
use_method=1

;[tmc]
;internal_tmc_name="gnsport"
;source="gnsport"
;port="COM,6"
;version=-1

You may have been referring to the wince screen tap sound, iGO mutes this.

hi,
thanks for reply
program-data-zip-branding-zip-license-f83/igo-primo-complete-torrent-t12043.html
i download above package from here / copied to another 16gb SD card and it's working now up
here is copy of sys.txt from above package
[debug]
skip_eula=1
experimental_features=1

[interface]
show_exit=1
extra_settings=1

[other]
demo_enabled=0

[route]
hnr_ignored_missing_country_ids=*

[vr]
disabled=0

[folders]
data="/BACKUP/save"

[tmc]
init_on_startup=0

here is copy of original SD card came with UNIT NX-501
[device]
type="CLARION_NX501"
sdcard_name="SD"

[folders]
sdcardpath="\SD"
data="/BACKUP/save"

[gps]
port=1
baud=9600

[project]
name="clarion_skypine"

[loading]
background_startup=1

[smart_routes]
enabled=0

[rds]
icons=0

[debug]
render_without_focus=0
render_without_focus_ext=0
[tmc]
init_on_startup=0

should i have to touch zipped data folder>project_config !!! i guess this is the right config which execute ..
issue is ,

1) No beep sound while i press (touch screen) menu of gps. ..from sound all volume and everything is UP and ON
2) when unit power up automatic start GPS and navigation ...i have to stop and then it goes to radio
were as original SD card always stay on radio normally ..till i press AV<=>NAVI button

thanks

Hello guys i am on the same page my navigation starts when head unit boots up looking for solution id like my tuner to pop up as with original sd card, any luck finding out a solution?

http://www.navitotal.com/other-device-unlock-f142/sound-all-igo-primo-t5042-90.html - go on reading

No sounds in all others IGO Primo builds installed in NX501 :-( Only the original build version works fine (from my original microSD card). All others versions need to be updated (by .exe file) for system audiodevice mixer troubles :-(

Hi guys, I'm new at this. I just bought a Clarion Nx501 from someone and I want to update the Maps for USA but is there a way to do it for free?

When the program is genuine, no.
When it is not you can use the maps from the map section (maps-buildings-dem-poi-f82/)

like the other user, I just bought a vehicle with a NX501 and the navigation doesnt work because there is no SD card. What can I do to get navigation on this unit?

Also, you asked the other user if theirs is genuine or not. If its not, can it do more?

thanks

Hi everybody, i am new here.
Just wondering anyone can help .my nx501 sd card is missing, so anyone has the canada, usa files.
Now i am stuck , just want the navi back, thx