igo8 on chiness GPS BluePanther Rubin   

igo8 on chiness GPS BluePanther Rubin

Postby belphegor » Sat Oct 02, 2010 2:22 pm

Hi,
I fitted igo8 which works well, except the TMC function.
This GPS is delivered and guaranty with internal TMC fitted.
After many researches on the web I changed the TMC parameters of iGO8 :
Save/system.ini
(As explained on the web in “ Hungarian” language.)

NEW parameters from the web (for bluepanther rubin?)
[tmc]
saved_config_available="1"
saved_config_classname="AVQ_GPSTMC_SOURCE"
saved_config_portname="COM"
saved_config_port="5"
auto_tuning="1"
saved_last_frequency="948"
saved_last_tuning_mode="1"

OLD parameters removed
[tmc]
saved_config_available="1"
saved_config_classname="GNS_GPSTMC_SOURCE"
saved_config_portname="COM"
saved_config_port="4"
auto_tuning="1"
saved_last_frequency="943"
saved_last_tuning_mode="1"

But no change yet, the internal TMC is not recognised.
So that means that some specifically Dll files are still necessary for this bluepanther “esoteric” TMC.
belphegor offline


Junior Member



 
Joined: Sun Jun 27, 2010 9:52 am
Posts: 46
Has thanked: 0 time
Been thanked: 0 time

Postby Black Wolf » Sun Oct 03, 2010 10:09 pm

belphegor wrote:Hi,
I fitted igo8 which works well, except the TMC function.
This GPS is delivered and guaranty with internal TMC fitted.
After many researches on the web I changed the TMC parameters of iGO8 :
Save/system.ini
(As explained on the web in “ Hungarian” language.)

NEW parameters from the web (for bluepanther rubin?)
[tmc]
saved_config_available="1"
saved_config_classname="AVQ_GPSTMC_SOURCE"
saved_config_portname="COM"
saved_config_port="5"
auto_tuning="1"
saved_last_frequency="948"
saved_last_tuning_mode="1"

OLD parameters removed
[tmc]
saved_config_available="1"
saved_config_classname="GNS_GPSTMC_SOURCE"
saved_config_portname="COM"
saved_config_port="4"
auto_tuning="1"
saved_last_frequency="943"
saved_last_tuning_mode="1"

But no change yet, the internal TMC is not recognised.
So that means that some specifically Dll files are still necessary for this bluepanther “esoteric” TMC.


Ask your seller what's default TMC port , baudrate and protocol for it !? In meantime try this, press AUTO SCANING for TMC port and baudrate on panel TMC in IGO8, and delete that lines from sys.txt before use auto scaning and recognizing TMC and TMC port + baud rate
I'm all what I'm not!

NO PM SUPPORT, All your questions, write to the FORUM!

USE BUTTON THANKS INSTEAD WRITING THANKS!!!
Black Wolf offline


User avatar Banned Users



 
Joined: Mon May 17, 2010 9:16 pm
Posts: 324
Location: Bosnia and Herzegovina ▂ ▃ ▅ ▆ █
Has thanked: 0 time
Been thanked: 71 times
Age: 42

Postby belphegor » Mon Oct 04, 2010 12:39 pm

OK Black wolf, Unfortunatly the vendor promised to give me the magic settings but I am still waitting and if nothing comes I will ask paypal for refund.
In the sys txt the TMC does not exsist nowhere.
Definitively igo does not find anthing in manual or in auto mode, so the bluepanther TMC must be very unacademic.
Wait and see for some return experience from vendor or user.
Have a great day!
Belphi
belphegor offline


Junior Member



 
Joined: Sun Jun 27, 2010 9:52 am
Posts: 46
Has thanked: 0 time
Been thanked: 0 time

Postby Black Wolf » Mon Oct 04, 2010 1:16 pm

belphegor wrote:OK Black wolf, Unfortunatly the vendor promised to give me the magic settings but I am still waitting and if nothing comes I will ask paypal for refund.
In the sys txt the TMC does not exsist nowhere.
Definitively igo does not find anthing in manual or in auto mode, so the bluepanther TMC must be very unacademic.
Wait and see for some return experience from vendor or user.
Have a great day!
Belphi


I'm afraid that they sold you nothing for tmc :) ... You too ;)

Then what you can is to wait for their answer and information for tmc settings, protocol, port, baudrate...
I'm all what I'm not!

NO PM SUPPORT, All your questions, write to the FORUM!

USE BUTTON THANKS INSTEAD WRITING THANKS!!!
Black Wolf offline


User avatar Banned Users



 
Joined: Mon May 17, 2010 9:16 pm
Posts: 324
Location: Bosnia and Herzegovina ▂ ▃ ▅ ▆ █
Has thanked: 0 time
Been thanked: 71 times
Age: 42

Postby belphegor » Mon Oct 04, 2010 8:37 pm

SOLVED!
Solution to this concern:
At least the vendor sent me some new igo8 files including a new igo8.exe specialy re_writtent to recognise this internal TMC, dll files and some others.
Result is that effectively the internal TMC works fine.
This sound to be developped by TMC advantec as ther logo appair during loading time.
But now as the igo8.exe is specialy modified for this TMC, this means that no anymore change update is possible on this file.
Current exe version is 7 january 2009.Data and branding can be updated I did it already.
I work with the TA 2010_6 map so at least everything is acceptable in spite of this blocked igo8.exe.
As all the rest is updating.
Expecting that can motivate others to buy 5' GPS 533MHz 128Mb ram 2G0 internal Atlas IV bluetooth FM transmitter internal TMC and so on sdmmc up to ... mine is 8G0 class 4...
Delivered without navigation software, but in the utilities you select the path you want to reach either your sdmmc or internal ram.
Very useful, and the multimedia accessories are perfect volume sound big screen very good product I confirm!
Belphi
belphegor offline


Junior Member



 
Joined: Sun Jun 27, 2010 9:52 am
Posts: 46
Has thanked: 0 time
Been thanked: 0 time


Return to General Discussions about iGO core

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 1 guest