Switch to full style
Post a reply

iGO 8 Keeps Crashing..

Sun Jul 03, 2016 7:03 pm

Hi all,

Im new to this site and have been searching the internet for a few days now and still unsure of my problem,

it keeps crashing when i get to the start navigation bit,

Below is what i keep getting

Current System time: "2016-07-03 17:22:10"
Build: 8.3.5.193799 Built @ May 27 2011 - 09:58:26

Memory Stats:

FreeMemory: 78 MB, 256 KB, 0 B
TotalUseableMemory: 97 MB, 32 KB, 0 B
MaxMemory: 128 MB, 512 KB, 0 B
ReservedMemory: 0 MB, 512 KB, 0 B
ActualCacheSize: 7 MB, 656 KB, 381 B
GarbageSize: 7 MB, 818 KB, 955 B



--------------------------------------------------------------------------
Process Name PID BaseAddr ParentPID PrioBase
--------------------------------------------------------------------------
iGO8.exe 0x06f4004e 0x00010000 0x00000000 0x00000003
--------------------------------------------------------------------------
--------------------------------------------------
Modules Name BaseAddr BaseSize
--------------------------------------------------
toolhelp.dll 0x40140000 0x00006000
coredll.dll 0x40010000 0x00094000
ole32.dll 0x403d0000 0x0002f000
oleaut32.dll 0x40410000 0x00031000
fpcrt.dll 0x400b0000 0x0000f000
--------------------------------------------------

--------------------------------------------------------------
Threads TID BasePrio DeltaPrio
--------------------------------------------------------------
0x09a9000a 248 0
0x087d0002 250 0
0x084b0002 251 0
0x07150072 249 0
0x071b004e 251 0
0x06f5004e 251 0
--------------------------------------------------------------


Exception: 0x80000002
At address: 0x00576bd8
0x00576bd8 (A)


WinCE CallStack snapshot (function names unknown - map file \SDMMC\iGO8.map not found):

0x40029518 (A)
0x0063e88c (A)
0x0063e764 (A)
0x0063dbd8 (A)
0x0063dcd4 (A)
0x00166948 (A)
0x00166914 (A)
0x40076428 (A)
0x40057de0 (A)
0x400523b0 (A)
0x4002a7ac (A)
0x4002aa9c (A)
0x400524b0 (A)
0x00576bd8 (A)
0x0057a56c (A)
0x0057a890 (A)
0x0057a8d8 (A)
0x0057af58 (A)
0x0057b120 (A)
0x0055a9bc (A)
0x0026641c (A)
0x0023d118 (A)
0x0023c5a8 (A)
0x0023043c (A)
0x005c6484 (A)
0x0005ec4c (A)
0x0005f04c (A)
0x0005e430 (A)
0x000612c8 (A)
0x000622b4 (A)
0x0016d6d8 (A)
0x001662d4 (A)
0x001668bc (A)


Global status:

bInFocus: 1
bMouseDown: 0
bInLogic: 0
bInRender: 0
CurrentState[128]: st_Place
GPS Pos: (-1.988201,52.977562)
Camera: pos:(-1.983513,52.986672) rot:0 persp:0 zoom:700.000000 eng=0)

Any help is much appreciated,

Rich

Re: iGO 8 Keeps Crashing..

Sun Jul 03, 2016 7:23 pm

Rename the file sys.txt temporarily to org_sys.txt
Rename the map Savetemporarily to Org_Save

Start igo and look if it still chrassed

Re: iGO 8 Keeps Crashing..

Sun Jul 03, 2016 7:46 pm

Image

Is this correct? changed save and sys to org_save and org_sys ?

Thanks for your reply

Re: iGO 8 Keeps Crashing..

Sun Jul 03, 2016 8:09 pm

RMatner wrote:Image

Is this correct? changed save and sys to org_save and org_sys ?

Thanks for your reply


Yes

Re: iGO 8 Keeps Crashing..

Sun Jul 03, 2016 8:23 pm

This time It crashes as soon as i press the GPS button,

Re: iGO 8 Keeps Crashing..

Sun Jul 03, 2016 8:42 pm

On what device you are using Igo8

Try an other Igo8 download and unpack

[Please Register or Login to download file]

Re: iGO 8 Keeps Crashing..

Sun Jul 03, 2016 8:46 pm

Thanks Holyhead,

Im using it on one of them double din touchscreen ebay units for a VW.

Re: iGO 8 Keeps Crashing..

Sun Jul 03, 2016 9:14 pm

It sounds like you may need something in your sys.txt file - maybe try restoring it back to sys.txt now that you've renamed the save folder.

Is the GPS stored on a removable SD card? If so, maybe check the SD card for corruption (put in a PC and check it via the disk properties). Also, are you using a cr@cked iGo8?

Also - has it ever worked?

Sent from my RemixOS PC!

Re: iGO 8 Keeps Crashing..

Sun Jul 03, 2016 9:34 pm

Hi jtrosky,

Ok thanks,

Yes the GPS is on a micro sd card, i did try and copy it from the sd card to another sd card - but when i put that in the radio unit it did not reconise a sd card was inserted,

Im unsure if its a cr@cked version... as it was of ebay - so maybe ?

yes it has worked fine for a year then all of a sudden started crashing during naviagations .. then typing routes etc...

Re: iGO 8 Keeps Crashing..

Mon Jul 04, 2016 12:14 am

My guess is that the other MicroSD card didn't work either because it was too high capacity (or wrong "type" - SDXC usually won't work - sometimes, SDHC will, regular SD will always work) or it wasn't formated to FAT32 format. Can you confirm either of those? Depending on the exact head-unit, it may be a legit version of iGo8. Hard to say for sure.

If it worked fine for a year and then started having issues, I suspect either that the MicroSD card is going bad or it's corrupt. I would check it in Windows like I said above and see if Windows detects any corruption. You can also try formatting that other SD card with FAT32 and then see if it works.

Please post your results.

Sent from my RemixOS PC using Tapatalk!

Re: iGO 8 Keeps Crashing..

Mon Jul 04, 2016 7:38 am

Post 1 said \SDMMC\iGO8.map not found)

So is your Navipad correct I suppose that you can edit (setup in the Din etc)

On the moment you have all the folders and files lose on the SD card if i am right.
If you place all the files and folders in a Folder named IGO8 on the SD card what happend then.

Re: iGO 8 Keeps Crashing..

Wed Jul 06, 2016 10:07 pm

Thanks for your replies guys. Sorry haven't replied sooner currently away, I think the Micro sd card is corrupt, it's slow going through it and cannot delete or format it atm, I've scanned for errors on it which it does say there are errors.. But I'm unable to fix them.

Re: iGO 8 Keeps Crashing..

Wed Jul 06, 2016 10:17 pm

Yeah, for how cheap SD cards are, I'd just buy a new card and then "upgrade" to the latest cr@cked version of Primo (if the version you are currently using is not cr@cked, simply copying the files to a new SD card won't work as a "legit" version of iGo is tied to a specific SD card).

If you know the resolution and amount of RAM you have in your head-unit, we can link you to an appropriate cr@cked version.

If you are in the US, I'm actually in the process of putting together Primo 2.4 archive geared towards "USA" users that will make it very easy for USA-based users to get up and running with iGo 2.4. It contains a lot of USA-specific "stuff" pre-loaded (US TTS voices, speed camera database, etc) as well as a nice, pre-loaded skin and some UX enhancements. You would just need to add your content (maps, pois, etc). If you are not in the US, you could still use it, but would need to add your own country-specific voices, speed-camera, lang files, etc...

Sent from my HP SlateBook 10 x2 PC using Tapatalk
Post a reply