Switch to full style
Post a reply

Wed Aug 03, 2011 1:43 pm

i did i use :ui_igo8_da folder name ...thats the one i try with and i get errors...

Wed Aug 03, 2011 1:45 pm

Then try removing the _da in the sys.txt and change the file name in the data.zip back to just ui_igo8. Don't forget to save the sys.txt first before exiting the file.

Wed Aug 03, 2011 2:18 pm

i did as u say and i get :The application fail to start last time do u want to reset to factory default and lose all your pols tracks and settings ..if i press yes i get error fail to open :ui_igo8_da\common\ui\templates.ui exiting application ...if i press NO i get ui_igo8_da\960_544\loading.bmp..
Ichange txt. in [interface]
skin="ui_igo8"
vga=0
maxzoom2d=6000000
show_exit=1
laneinfo_signpost_enabled=1
and i change the file name in zip folder from ui_igo8_da TO ui_igo8..
AND why do i always get this message :The application fail to start last time do u want to reset to factory default and lose all your pols tracks and settings..?? is this normal for this kind of divice or what?

Wed Aug 03, 2011 2:32 pm

To be completely honest with you, it's hard to diagnose errors when the device isn't right in front of me. I have to give it more thought. [color="red"] As for the message about losing settings, the other guys can work with you on that. [/color] BTW, are you using the sys.txt that I included with the download or did you change it to another one?

EDIT: What happens if you completely remove the skin entry in the interface section?

Wed Aug 03, 2011 2:50 pm

first i used the sys.txt that u included with download thats this one:[interface]
skin="ui_igo8_da" and then YOU told me to change to sys.tx in" ui_igo8" and i did ...and i got all the errors..

Wed Aug 03, 2011 9:25 pm

Bajramovic wrote:first i used the sys.txt that u included with download thats this one:[interface]
skin="ui_igo8_da" and then YOU told me to change to sys.tx in" ui_igo8" and i did ...and i got all the errors..


Hmmm! I'm a little confused. The sys.txt that I included with the download had NO skin entry in any section. So I ask again did you use MY sys.txt that you downloaded with the program that I helped create or did you use another sys.txt from another place? Also the correct entry is "ui_igo8" NOT " ui_igo8". Do you see the difference? Did you try what I told you in the above post and completely delete the entire skin entry from your sys.txt?

This is the sys.txt from the download. Notice no skin entry anywhere.

[folders]
app="%SDCARD%/iGO8"

[debug]
enable_roadshadow=1
show_residentonly=1
enable_roadsign=1
enable_landmark_occlusion=1
show_oneway_3d=1
show_oneway=1
show_gps_pos=1
show_signpost=1
background_navigation=1
screen_calibration=1
skip_eula=1
;max_memory=25000000
traincrossing=1
supress_trivial_left=0
supress_trivial_right=0


[interface]
maxzoom2d=6000000
show_exit=1
shutdown_time=0
defaulttilt3d=7600
vga=0
resolution_dir="480_272"


[map]
2dheadup=1
3d_max_tiltlevel=10000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
stop_rotate_on_map_move=1
inertia_on_map_move=1
follow_gps=1
2dheadup=1

[poi]
poi_show_all_btn=1
poi_labels=1
show_poi_boundingrects=1
show_poi_areas=1
enable_pois_before_0802017=1

[navigation]
show_current_city=1
show_countrychange=1
autoreplan_action="AUTO"
gps_pos_to_road=1
sim_speed_factor=3.0

[smartzoom]
minangle=0
maxangle=80

[msnd]
enabled=0

[map]
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3dcarsizemul=10000

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0
supress_trivial_left=0
supress_trivial_right=0


[sound]
ding=1 ;=0 no ding
queue_length=200

[route]
correctness=80


[3d_config]
roadsign_lines_per_screen=12
disable_roadsign_navigation_mode=1 ;=0 in balloon =1 in street


[rawdisplay]
highres=0


[warning]
speedcam_max_lookahead=200
speedcam_max_angle=20
speedcam_snap_distance=200
speedcam_maxdistance_from_road=10

Use my sys.txt in place of the one you now have. The ONLY additions that you should make to any section[s] are the entries specific to your device. Again I remind you, make sure that you save the sys.txt in the file dropdown menu before exiting the file.

I see that your resolution is 800_480. That's one of the changes you have to make - from my 480_272.

Wed Aug 03, 2011 11:10 pm

Ok lets make sure first that i m using the right thing folders ,sys.txt and Igo.exe file...
i use everything from 2Din90500v2.rar file (sys.text data.zip branding.zip ,custom ,licence and other things whatever come in 2Din90500v2.rar
Then i was told just to replace Igo.exe ( in 2Din90500v2.rar) with the 8.3.4 build exe file (from family_reunion.rar) ...is this right thing to do? did i do it right??

Thu Aug 04, 2011 6:33 am

Hi
I see all is gone wrong here. Reading the thread, I can't say what exactly is done and what changes are made where.
In fact, the guilty party where all trouble starts is the device manufacturer who changes the WindowsCE6.0 in a way some software (like iGO) don't find some needed Windows files.
I think the best thing to do is start all over and listen to one moderator only ! Too many cooks spoil the soup, right?

When you follow my lead, start over the installation on a formatted sd card. Use the 2Din90500v2.rar and the data.zip you downloaded. Do exactly as before.
When you try it, you probably get the error message you got before. I told it can happen.

Then use [Please Register or Login to download file] . Its a 33MB download, so that won't hurt to download it. (When asked for a password, it's navitotal)
Replace the .exe - and nothing else) on the sd card with the .exe from the last download and retry. That should solve the error message.
When iGO functions, that is it.

When it does not (it is rare, but can happen), download [Please Register or Login to download file] , unrar, (password is navitotal) and replace the data.zip on sd. Then try iGO again.

Fri Feb 10, 2012 1:16 pm

nabi wrote:I haven't seen that error in a very very long time, so I not surprised to see the iGO is 8.0.0.35389 dated 2008.
We are 2011 and you are missing new features in iGO, new maps, ....

Thus I suggest you renew your iGO, starting from base: http://www.navitotal.com/showthread.php?909-Double-din-2Din-GPS-How-to-install-thread


Hey Nabi, trying to follow your instructions but your attachment with the links - all the hosting on your files seem to have either expired or being deleted. Any chance of rehosting your build - or what do you suggest seen as these threads are all quite old and i'm sure they are even outdated by now. Thanks a lot!

Fri Feb 10, 2012 2:56 pm

All files have been deleted as a consequence to the MegaUpload affair :(

The instructions still have some (little is more accurate) value though the iGO build is outdated by now. Unless your device has really a lack of memory, I suggest you either try the igo or primo build (depending on your device) uploaded by chas521:
http://www.navitotal.com/showthread.php?1837-Working-iGO-8.3-from-my-device
http://www.navitotal.com/showthread.php?1728-Working-Primo-from-my-device
Or you could try the more recent Primo 2.0 by YurbuhTuggly :
http://www.navitotal.com/showthread.php?8452-iGo-Primo-2.0-Release-9.6.2.209584-October-2011

Thu Apr 25, 2013 11:56 am

nabi wrote:Hi

hi napi I have problem with primo2 in my 2 din head unit its working well but I need to reset
the device every time I want operate the navigator and give me message application fail last
time do you want restore lap lap lap can you help me please am online now

Thu Apr 25, 2013 12:44 pm

First, delete the save folder and try again.

When it happens again:
Can you give the exact message?
Where did you get the Primo?
Can you post your sys.txt?

Thu Apr 25, 2013 1:28 pm

this is my sys
[device]
;type="Delco_QX-BH751T"

[folders]
has_secondary_root=0

[interface]
show_exit=1
show_minimize=1
extra_settings=1
connection_enabled=2
enable_natural_guidance=1
enable_stateanim=1

[gps]
port="auto"
baud="auto"

[debug]
skip_eula=1
experimental_features=1
;hnr_silent_startup=1
;max_memory=73400320
;reserve_memory=5242880

[route]
;hnr_ignored_missing_country_ids=*
;Allow_save_route=0
save_route_after_auto_recalc=0

[navigation]
show_current_city=1
parking_ad_enabled=0
congestion_ad_enabled=0

[quickdetour]
;enabled=0

[navigation.sudden_detour]
;enabled=0

[route.histspeed]
enabled=1
show=1
use_timeslice=1

[map_update_checker]
enabled=0

[sound]
pool_size=4096
speech_delay=4000
config="maximum"
csv_voice_enabled=1

[scheduler]
idle_execution_restrained=1

[2d]
traffic_lights=1

[other]
demo_enabled=0
asr_enabled=1

[poi]
featured_provider=netlocalsearch.naviextras.google
provider_filtering=1

[network]
available=1

[http]
enabled=1

[naviextras]
boot_service_address="http://zippy.naviextras.com/services/index/rest/2/boot"

[tmc-http]
enabled=1
start=1
dt_dl_0=120.0
dl_dist_0_km=500.0
servers.size=1
servers[0].url="http://zippy.naviextras.com/services/tmclite/data/nng-igo-tmc-iphone/0/"

[vr]
disabled=0
use_low_conf_question=0
timeout_trailing_silence_ovde=2000
;Microphone scratch
open_microphone_early=1
microphone_early_delay=150
after_ding_delay=300
;ding_file_name="!msgbox"

[tmc]
tmcprovider_rssi_stability=0
tmcprovider_rssi_average=0

Fri Apr 26, 2013 2:14 pm

nabi wrote:Can you post your sys.txt?

I sent my sys above

Mon Apr 29, 2013 11:56 am

Please help 3 days now no reply:helpsos::helpsos::helpsos::helpsos::helpsos:
Post a reply