Garmin XT 5.52 on Navman S200   

Garmin XT 5.52 on Navman S200

Postby Fotchy » Fri Dec 30, 2011 2:03 am

Hi,

I tried to install Garmin XT 5.52 on my "Storage Card", using the following link "http://www.navitotal.com/forums/showthread.php?7763-Garmin-XT-5.52-(Garmin-Asus-M10)-for-WINCE-6-(800x480)&highlight=Garmin".

When i get to step 3. Run_CE5.exe ---->for winCE5 in FileManCE nothing happens and my Navman makes bell sounds. It sounds like the program has crashed.

Can you please run through the steps necessary to install Garmin XT 5.52 on my "Storage Card" on a Navman S200.

Cheers,

Shane
Fotchy offline


Junior Member



 
Joined: Sat Dec 24, 2011 4:35 am
Posts: 53
Has thanked: 0 time
Been thanked: 1 time

Postby deejai » Fri Dec 30, 2011 11:12 am

from that link

read post at #36 and #45

try again
deejai offline


Junior Member



 
Joined: Mon Jun 06, 2011 5:45 am
Posts: 78
Has thanked: 0 time
Been thanked: 2 times

Postby Fotchy » Tue Jan 03, 2012 2:12 am

Hi,

I'm still having trouble getting Garmin XT 5.52 on Navman S200. I'll explain the steps I used:
1. Extract Garmin_5.52_SDMMC_CE5_CE6 on root Storage Card.
2. Place map in G:\Garmin_5.52_SDMMC_CE5_CE6\System. Used City Navigator Australia and New Zealand NT 2012.40 (image unlocked) & rename to gmapprom1.img
3. Copy from post #60 (Que_storage_card) for Windows CE5 & place in G:\Garmin_5.52_SDMMC_CE5_CE6\Garmin
4. Copy from post #60 (Que_storage_card_full) for Windows CE5 & place in G:\Garmin
5. From post #45 replace IMG.gir and IMG_240.gir inside Garmin folder with this file
6. Edit "GarminDevice" in G:\Garmin_5.52_SDMMC_CE5_CE6\Garmin\Network\Garmin and replace "SDMMC" with "Storage Card".
7. Run Run_CE5.exe ---->for winCE5 from Navman S200

After step 7, Navman S200 goes to a black screen with a banner up the top screen "Warning - Use GPS Safely" and hangs. Also when i navigate to Start, Garmin Navigation folder, there is nothing inside. Can u please help?

Cheers,
Shane
Fotchy offline


Junior Member



 
Joined: Sat Dec 24, 2011 4:35 am
Posts: 53
Has thanked: 0 time
Been thanked: 1 time

Postby deejai » Tue Jan 03, 2012 2:44 am

This poblem I test by
Go to this link

http://www.navitotal.com/forums/showthread.php?7763-Garmin-XT-5.52-%28Garmin-Asus-M10%29-for-WINCE-6-%28800x480%29/page4

page 4 post #36
after downloads file it will has 2 file

1.Garmin.exe rename to Run_CE5 and replace in Garmin folder

2.Garmin.MSCR rename to Run_CE5 and open it with notepad find word Que_CE6.exe edit to Que_CE5.exe then replace in Garmin folder

try again
deejai offline


Junior Member



 
Joined: Mon Jun 06, 2011 5:45 am
Posts: 78
Has thanked: 0 time
Been thanked: 2 times

Postby Fotchy » Tue Jan 03, 2012 3:29 am

Hi deejai,

Followed your instructions and still no luck (black screen with banner "Warning - Use GPS Safely" and hangs. I edited "Run_CE5.mscr" but not sure if i have done it right. Can you please have a look below. Also, do i need to add "Storage Card" anywhere in this file. If so, where?

CreateShortcut (GarminAppDir \"start Garmin.lnk","""" & cardName \"Garmin\Que_CE5.exe"" ", TRUE)
CreateShortcut (GarminAppDir \"Settings.Lnk","""" & cardName \"1\gmapplauncher.exe"" SETTINGS ", TRUE)
CreateShortcut (cardName \"1\set.Lnk","""" & cardName \"1\gmapplauncher.exe"" SETTINGS ", TRUE)

RunWait(SystemPath("ScriptPath")\"Que_CE5.exe")

Cheers,
Shane
Fotchy offline


Junior Member



 
Joined: Sat Dec 24, 2011 4:35 am
Posts: 53
Has thanked: 0 time
Been thanked: 1 time

Postby Fotchy » Tue Jan 03, 2012 6:35 am

Hi deejai,

When i go to Start, Garmin Navigation, Settings it says "Cannot find 'gmaplauncher' (or one of its components). Make sure the path and filename are correct and that all the required libraries are available. Aslo, when i go to Start, Garmin Navigation, start Garmin it says "Cannot find 'Que_Ce5' (or one of its components). Make sure the path and filename are correct and that all the required libraries are available. How can i correct this?

Also from post #36, it says to add the following 2 files to the main Garmin folder and set the navigation path to SDMMC\Garmin\Garmin.exe. I have not set the navigation path, how can i do that?

Cheers,
Shane
Fotchy offline


Junior Member



 
Joined: Sat Dec 24, 2011 4:35 am
Posts: 53
Has thanked: 0 time
Been thanked: 1 time

Postby deejai » Tue Jan 03, 2012 5:03 pm

The first you have to open wince and look in residentflash if find Garmin folder or file you must deleate it

Second I try to manage 5.52 CE5 Storage Card 480x272
[Please Register or Login to download file]

test it goodluck
deejai offline


Junior Member



 
Joined: Mon Jun 06, 2011 5:45 am
Posts: 78
Has thanked: 0 time
Been thanked: 2 times

Postby Fotchy » Tue Jan 03, 2012 11:25 pm

Hi deejai,

The only folder i found was "Garmin Navigation" in H:\Program Files\Unlock\Programs\Garmin Navigation. When i try to delete it, windows comes up with an error "Item not found. This is no longer located in.... Verify the item's location and try again. Initially tried to delete file in FileManCE but returned error "Fatal Application Error" Application eManCE.exe has performed an illigal operation and will be shut down...

With the second method you have suggested, do i have to repeat steps 1-7 in post #3?

Cheers,
Shane
Fotchy offline


Junior Member



 
Joined: Sat Dec 24, 2011 4:35 am
Posts: 53
Has thanked: 0 time
Been thanked: 1 time

Postby deejai » Wed Jan 04, 2012 5:12 am

For second method by

after download and extract file
put your map in system folder

copy folder
1
Garmin
GPX
POI
System
VEHICLE
VOICE

to Storage Card

comeback first page of Navigator
choose Storage Card\Garmin\Garmin.exe
deejai offline


Junior Member



 
Joined: Mon Jun 06, 2011 5:45 am
Posts: 78
Has thanked: 0 time
Been thanked: 2 times

Postby Fotchy » Wed Jan 04, 2012 6:00 am

Hi deejai,

Followed your instructions. When i open Garmin.exe in FileManCE, Navman S200 goes to a black screen with a banner up the top screen "Warning - Use GPS Safely" and hangs. Is there a solution to this problem? Maybe should i try an older version on Garmin XT?

Cheers,
Shane
Fotchy offline


Junior Member



 
Joined: Sat Dec 24, 2011 4:35 am
Posts: 53
Has thanked: 0 time
Been thanked: 1 time

Postby Fotchy » Sun Jan 08, 2012 12:17 am

Hi everyone,

Has anyone managed to successfully install Garmin XT on a Navman S200? If so, can you please let me know how it's done or post a link to the tutorial used. I've been trying for days now and are eager to test the software out. Your help will be greatly appreciated!
Fotchy offline


Junior Member



 
Joined: Sat Dec 24, 2011 4:35 am
Posts: 53
Has thanked: 0 time
Been thanked: 1 time


Return to General Discussions about Garmin

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 1 guest