Navigon 40 Easy GPS Problem   

This Section is for General discussion and help for Navigon GPS Systems.

Postby Fatboyfun » Fri Jun 21, 2013 4:23 pm

All Binatone's are the same unlocking wise, but avoid the older A, B, C, X series as they have slow processors,

The S500 is a nice device, only things to watch out for is user error resulting in failure to boot, only a ROM flash will fix it, and not every device's ROM is available, also watch out for failed internal flash chips, this gives a error message like, "Recover the hive partition", this is not fixable.
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 403 times

Postby mr_cs » Fri Jun 21, 2013 5:07 pm

Thanks for your advice; I will buy an F430. No doubt I will be asking you more questions on the other Forum section.

Regards, Colin
mr_cs offline


Junior Member



 
Joined: Sun Mar 18, 2012 11:29 am
Posts: 25
Has thanked: 0 time
Been thanked: 0 time

Postby mr_cs » Fri Jun 21, 2013 10:15 pm

Sorry, I do have a question about IGO Primo!

All has loaded succesfully. My only problem is that I can not get the low bridge warnings to appear. I have the appropriate fdr file but I suspect that I need a sys entry to make them work. Any ideas?

Colin
mr_cs offline


Junior Member



 
Joined: Sun Mar 18, 2012 11:29 am
Posts: 25
Has thanked: 0 time
Been thanked: 0 time

Postby Fatboyfun » Fri Jun 21, 2013 10:25 pm

From a more in-depth search it appears that iGO has a problem with the GPS receiver in the Navigon 40 Easy, and i can't find a solution to fix it.

Other software may have more success, But not Tomtom as it doesn't like WinCE6! Maybe Sygic?

You will not fail with a Binatone!
Currently sleeping...
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 403 times

Postby Fatboyfun » Sat Jun 22, 2013 6:04 pm

mr_cs wrote:Sorry, I do have a question about IGO Primo!

All has loaded succesfully. My only problem is that I can not get the low bridge warnings to appear. I have the appropriate fdr file but I suspect that I need a sys entry to make them work. Any ideas?

Colin


I missed this post yesterday...

Things to check for...
Check you have the correct licenses.
Check you have the correct .ftr file for the mapset
To get truck restrictions working change your profile to lorry, tick use extended settings, fill out the dimensions

Please Note, some mapsets needed the height and weight to be a multiple of three, ie, height X 3, weight / 3, something like that.
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 403 times

Postby mr_cs » Sat Jun 22, 2013 7:24 pm

Thanks for the advice; I think I have cracked the problem. Probably using the wrong map.

Next question! Any idea which script generates the sounds for say approaching a low bridge. I did this on my Pioneer Avic that uses IGO8.3 but cannot find the write file to edit.

Again thanks for all your help.

Colin
mr_cs offline


Junior Member



 
Joined: Sun Mar 18, 2012 11:29 am
Posts: 25
Has thanked: 0 time
Been thanked: 0 time

Postby Fatboyfun » Sat Jun 22, 2013 8:38 pm

There is no script, within Primo, go to Settings->Sounds and Warnings->Warning Sign Alerts->Lorry-specific to edit the distance and alert type, then go back to the Warning Sign Alerts screen and make sure the top option is ticked, then tap Sound settings to change the warning method and sound (if you have TTS pro enabled the sound option will be greyed out)

For information, Preliminary alerts you when the sign first appears in grey, and Active waits until the sign goes red before alerting you.
Currently sleeping...
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 403 times

Postby mr_cs » Mon Jun 24, 2013 5:07 pm

I have been unable to get TTS pro working using the downloads I have been able to find. Can you recommend a download that is not a 'torrent'?

Thanks Colin
mr_cs offline


Junior Member



 
Joined: Sun Mar 18, 2012 11:29 am
Posts: 25
Has thanked: 0 time
Been thanked: 0 time

Postby Fatboyfun » Mon Jun 24, 2013 5:28 pm

The torrent for tts pro available from here does work, can you elaborate on why it doesn't work for you?
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 403 times

Postby mr_cs » Mon Jun 24, 2013 5:44 pm

I attach the instructions that came with the download. Basically TTS Pro remains greyed out in the menu of options and the voices do not work. Do you think that it should work?

I am not keen on using torrent files.

Any help would be much appreciated.

Colin

=======================


ZERVDIM
Thessaloniki
GREECE

Installation
=============
Copy the file tts_nua_v5 to this path : Primo/
Copy the vautov5.dll file to this path : Primo/
Copy the voices to this path : Primo/content/voice
Copy the lang.zip file to this path: Primo/content/lang
copy the file United Kingdom_NQ_2011.Q3_111102 or you can add your file to this path: Primo/content/phoneme.

Also in order to work the voice with Primo you should add this
to your sys.txt (you can find sys.txt in this path: Primo/sys.txt)
Open the sys.txt file with notepad and paste the following:

[sound]
csv_voice_enabled=1


If you want the TTS Pro to announced you the Speedcameras
and the Proximate Alerts you should add the following to
your sys.txt


[warning]
speedlimit_warning_visual=1
speedcam_warning=1
is_spoken=1
speedcam_max_lookahead=2000
speedcam_maxdistance_from_road=10


[speedcam_category:0]
activated_spoken_type=speech
activated_speech="Caution speed camera ahead"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="150:2000,140:1800,130:1500,120:1400,110:1300,100:1200,90:1100,80:1000,60:700,50:600,40:500"


[speedcam_category:1]
activated_spoken_type=speech
activated_speech="Caution mobile speed camera ahead"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="150:2000,140:1800,130:1500,120:1400,110:1300,100:1200,90:1100,80:1000,60:700,50:600,40:500"



[speedcam_category:2]
activated_spoken_type=speech
activated_speech="Caution traffic light camera"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="110:1000,90:900,60:700,50:500,40:200,20:100"


[speedcam_category:3]
activated_spoken_type=speech
activated_speech="Caution average speed camera ahead"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="150:2000,140:1800,130:1500,120:1400,110:1300,100:1200,90:1100,80:1000,60:700,50:600,40:500"


[speedcam_category:4]
activated_spoken_type=speech
activated_speech="Caution traffic light ahead"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="110:1000,90:900,60:700,20:500"


[speedcam_category:6]
activated_spoken_type=speech
activated_speech="Caution dangerous railway crossing"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:500"


[speedcam_category:7]
activated_spoken_type=speech
activated_speech="Caution bus lane camera ahead"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="110:1000,90:900,60:700,20:500"


[speedcam_category:8]
activated_spoken_type=speech
activated_speech="Caution dangerous crossing"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:300"


[speedcam_category:9]
activated_spoken_type=speech
activated_speech="Caution scholl zone ahead"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:500"


[speedcam_category:10]
activated_spoken_type=speech
activated_speech="Caution town entry point"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:2000"

[speedcam_category:11]
activated_spoken_type=speech
activated_speech="Intimidation radar"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0


[speedcam_category:12]
activated_spoken_type=speech
activated_speech="Caution toll ahead"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:1000"


[speedcam_category:13]
activated_spoken_type=speech
activated_speech="Caution hospital"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:300"


[speedcam_category:14]
activated_spoken_type=speech
activated_speech="Caution fire Station ahead"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0

[speedcam_category:15]
activated_spoken_type=speech
activated_speech="Change taxi zone"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0

[speedcam_category:16]
activated_spoken_type=speech
activated_speech="Caution give way"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:200"


[speedcam_category:18]
activated_spoken_type=speech
activated_speech="Caution speed breaker"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:500"

[speedcam_category:19]
activated_spoken_type=speech
activated_speech="Caution Children ahead"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:100"

[speedcam_category:20]
activated_spoken_type=speech
activated_speech="Caution dangerous Turn"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:500"


[speedcam_category:21]
activated_spoken_type=speech
activated_speech="Caution tunnel ahead open your lights"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:500"


[speedcam_category:22]
activated_spoken_type=speech
activated_speech="POI"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:1000"


[speedcam_category:23]
activated_spoken_type=speech
activated_speech="Police department"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0


[speedcam_category:31]
activated_spoken_type=speech
activated_speech="Caution dangerous point"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:500"



-----------------------------------------------------------------------------------------
Moreover if you want to listen louder the TTS Pro you
must the following to your sys.txt :

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=0

[dynamiccompressor]
compressor=1
ratio=9
gain=9

[sound]
maneuver_chimes=0
queue_length=200
mute_os_key=1
pause_mp3_sooner=1

[debug]
sound_q_length=200
tts_min_ready_wav=1
tts_getaway_time=100
tts_expected_engine_delay=1400

[route]
guidance_at_highway_entry=1

==========================================================

Open your Primo and you will be ready!!!!!!!!!!!!!!!
mr_cs offline


Junior Member



 
Joined: Sun Mar 18, 2012 11:29 am
Posts: 25
Has thanked: 0 time
Been thanked: 0 time

Postby Fatboyfun » Mon Jun 24, 2013 6:27 pm

Zervdim's voices gave us a lot of trouble because they were modified.

I appreciate you don't like torrents, but yurbuh tuggly's voice pack does work, and is unmodified, and works!
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 403 times

Postby mr_cs » Mon Jun 24, 2013 8:09 pm

Ok thanks, I will give it a try

Colin
mr_cs offline


Junior Member



 
Joined: Sun Mar 18, 2012 11:29 am
Posts: 25
Has thanked: 0 time
Been thanked: 0 time

Postby Pockobg » Wed Jul 31, 2013 7:47 am

I have a version of a script that primo can be loaded on Navigon42. I think it is the same in this case ..... i will upload the files later today if needed
Pockobg offline


Junior Member



 
Joined: Mon Nov 22, 2010 1:02 pm
Posts: 1
Has thanked: 0 time
Been thanked: 0 time

Re: Navigon 40 Easy GPS Problem

Postby DCSCOM » Fri Jan 23, 2015 8:51 pm

Core config port 7 38xxx
user settings port 7 38xxx
user settings tmc port 4 38 xxx
DCSCOM offline


Junior Member



 
Joined: Sat Apr 16, 2011 6:09 pm
Posts: 7
Has thanked: 1 time
Been thanked: 2 times

Re: Navigon 40 Easy GPS Problem

Postby salleserbian » Sun Jan 25, 2015 10:55 pm

Hello I have Navigon 40 Premium, and I managed to solve the problem of installing IGO 8 or PRIMO or any navigation. THIS The internal memory devices that folder ManualReader I copied igo.exe and the rest of the necessary files and folders (content .....), then I renamed the file ManualReader.exe in ManualReader1.exe a name ManualReader.exe gave igo.exe UNDERSTAND what I did. Right. Then I turned off the navigation. On, immediately started the standard NAVIGON software but now the magic happens. WHEN the initial screen select the BOTTOM OPTION so GUIDE. EEEE now start IGO or PRIMO. In this way navi itself include a GPS receiver and he's doing, and IGO easily detect the GPS settings. Who understands me realize is, it's crazy. Thank write to [email protected]. GREETINGS FROM THE REPUBLIC OF SERBIAN, ......
salleserbian offline


Junior Member



 
Joined: Sun Jan 25, 2015 10:48 pm
Posts: 7
Has thanked: 0 time
Been thanked: 2 times

PreviousNext

Return to General Discussion about Navigon

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 1 guest