Hi,

on my Becker I can't volume up sound so it's difficult to hear. On the program (IGO) the volume is set to maximum, but in WIN CE master volume is set in lower half of slider. When I adjust volume in WINCE, sound is excellent and strong but the WIN won't remember setting and put back slider where it was before.

What can I do to permanently adjust volume?

SOLVED!!!

Add to sys.txt

[sound]
use_os_volume=0

What is iGO's master volume set as?

IGO's master volume is at 100%, but CE's abou 40%. When I set CE's volume to 100% the sound is excellent but after less than a minute it set itself on lower volume.

Did you unlock your device to run a different app to the original? It's very strange that the volume returns to 40% by it's self

No, I didn't unlock device. I don't know how to do that. CE won't remember any settings that I change, and keeps returning to original one.

It is normal for earlier versions of Windows CE to revert to it's default settings after being switched off, What is not normal is it adjusting the volume by itself, iGO's master volume is linked to the WinCE volume control. Post your sys.txt

My sys.txt (found on iGO8 folder) looks like this

[device]
type="BECKER_2010Q3E2"

[tmc]
port="COM,1"
baud=38400
source="gns"

The version of WINCE is 5.0

Before i get you adding things to the sys.txt, check that every volume slider is at maximum and check the dynamic volume is switched off.

There is only one volume slider in IGO software and it's on maximum. There is no dynamic volume or I can't find it.

Has it always been like this?

Yes, it's brand new. Only a few weeks old

It sounds like iGO is limiting the volume of the device, So copy the Data.zip to your PC, open it and navigate to Data.zip\Config\Devices, Find the ini file called BECKER_2010Q3E2.ini, open it with Notepad and post here.

There is no file BECKER_2010Q3E2.ini in that directory, only config\devices\MEDION_E44XX.ini and here it is

; ==========================================================
; DEVICE SPECIFIC CONFIGURATION

info_names="MEDION E44XX"
[3d]
shapetile_resolution=128
cell_lod_modifier=8

[bluetooth]
driver="SCP"
enum_all_devices=1
devicename="Becker TA"
data_op_method=1
pairpin="0000"
autoconn_cycle_devices_max_count=-1
autoconn_first_device=1
autoconn_last_on_link_loss=1

[phone]
driver="BT"
use_callhistory_ext=1
play_in_band_tone=255

[debug]
nortc=1

[dynamiccompressor]
compressor=1
config=high

[gps]
port=2
baud=57600

[guidancecompressor]
compressor=1
config=high

[interface]
phone=1
show_exit=1
shutdown_time=0

[media]
volume_method=2

[modules]
IOSVOLUME_MANAGER="BECKER_OSVOLUME_MANAGER"

[oasis]
include_directories="%SDCARD%,GAME::%app%/content/games,%MYFLASHDISK%/Media"

[other.becker]
tunnel_dim_value=3
backlight_oncharger=8
oasis_volume_values="0,2,10,25,40,60,80,105,130,155,180"
voice_volume_scale=180
no_countdown_on_suspend_event=1
power_off_supported=0
sds_enabled=1

[other.becker.remote]
zoom_speed=1
zoom_timeout=200
discard_keys_after_rc_paired=1000

[power]
backlight_manage_values = 1
backlight_manage_keys = 1
backlight_max = 8
backlight_min = 1
backlight_reverse = 0
backlight_key_timeout_BA = "BatteryTimeout"
backlight_key_timeout_AC = "ACTimeout"
backlight_key_ontap_BA = "BacklightOnTap"
backlight_key_ontap_AC = "ACBacklightOnTap"
backlight_key_on_BA = "OnOff"
backlight_key_on_AC = "ExtOnOff"
backlight_methods = 39
backlight_events = 1
skip_suspend_process_all=1
disconnect_gps_on_suspend=0
powermgm_state="0"
backlight_day="80"
backlight_night="30"

[rawdisplay]
screen_x=480
screen_y=272
highres=0
class="landscape"
driver="GX"

[scp]
psscfg="pss_win32.cfg"
ssscfg="sss.cfg"
psspath="scp"
sdspath="scp"
parserpath="scp"
sacpath="scp"

[screen]
do_not_move_sliders_with_wheel=1
focus_followlinks = 1
;FFKEY_LEFT=0
focus_list_keyup=0
;FFKEY_RIGHT=1
focus_list_keydown=1
focus_list_keyleft=-1
focus_list_keyright=-1
; L - long-lick hotkey
focus_longclick_key=7
focus_lost_ontouch=1
focus_lost_onhwkey=1
; SearchItem_FocusIndex: search items based on focus index, if no focus index available then use ZigZag search (method 2)
focus_searchitem_method=3
focus_show_default=1
focus_timeout=8000
focus_type="bmp"

[sound]
;mute_os_key=1
;use_method=1
effect_volume=60
voice_volume=100
phone_volume=128
dynamic_volume_type=3
dynamic_volume_minspeed=60
dynamic_volume_maxspeed=160
dynamic_volume_os_volume_max=255
dynamic_volume_os_amplification_step=5
os_volume=255
config=maximum
speaker_resume_sec=0

[timezone]
patch_dst=1

Make a copy of the sys.txt on your PC just in case, and then add the following entries to the sys.txt on your device

[sound]
voice_volume=255
effect_volume=255
os_volume=255
sound_volume=255
use_os_volume=1

These entries should force iGO to use maximum volume, You may not need to use all of them. Obviously you will need to restart iGO for these to take effect.

No changes. The sound volume remains the same, IGO slider is at max.

Enough for today, must go to sleep, working early. Thanks Fatboyfun for effort, we will continue tomorrow.