Android resolution

Is it possible to alter the resolution so that the primo which I have installed on my Wayteq tab will also work on my galaxy s3 and my archos tablet.On both devices they run perfectly but only fill about 1/4 of the screen.Anyhelp very much appreciated.

anyone please???It is driving me nuts!

It depends upon what the resolution size you are talking about and if the resolution size has been included in the program. If it has, you can probably "force" it with a sys.txt entry and possibly add a stretch=1 entry.

Thanks.Can you advise where in says.txt I add the stretch=1 line please.I have a android download with various resolutions,none which match exactly the archos but one is near enough.However which ever one I try has no effect on the display but maybe the stretch will!

No guarantees but you could try something like this:

[interface]
resolution_dir="480_272"
vga=0

[rawdisplay]
class="landscape"
screen_x=854
screen_y=358
highres=0
stretch=1

You might need to play with the screen_x and y numbers. Also, you might need to delete your save folder.

Incidentally, what resolution size are you talking about for your device[s]?

EDIT: Here's a branding and data.zip that contains different resolution sizes. Back up your current .zips first and then try these. You should make a sys.txt entry in the program as well.

Hidden Content

This board requires you to be registered and logged-in to view hidden content.

Press reload or refresh after pressing thanks.

The technical specifications of the Archos 80 G9 tablet are as follows:
Processor Speed: 1 GHz
Screen Resolution: 1,024 x 768
Screen size: 8 inch
Dimensions: 6" x 9" x 0.46"
Weight: 1 pounds

Had no luck as yet.

ovalball wrote:The technical specifications of the Archos 80 G9 tablet are as follows:
Processor Speed: 1 GHz
Screen Resolution: 1,024 x 768
Screen size: 8 inch
Dimensions: 6" x 9" x 0.46"
Weight: 1 pounds

Had no luck as yet.

Did you look at my edit in post #6?

No I missed that!

Well I will have to give up for today,my head is in bits.Tried all the above suggestions but no go.Thanks Chas and if you can think of anything else please let me know.

Tell me exactly what you tried.

iGO Primo 2.0.2 9.6.7.274244 Explay Infinity (17 december 2012) - Android - resolution 1024_768

Thanks to BogdanSNB

Hidden Content

This board requires you to be registered and logged-in to view hidden content.

Press reload or refresh after pressing thanks.

I'm sorry but you'll have to work it out yourself. I really don't know Android. Please post your results.

i nstalled the above and first time it loaded but didnt show any maps.second and subsequent attempts to run resulted in the following error message
user interface resolusion(0 x 0 )is not supported or compatable skin can not be found.Exiting application.

If i then go into app settings on my android and clear the data,it will start again,but then not start on each attempt after.Any ideas anyone please?

after more tinkering,i deleted the sys.txt and the app appears to load every time....up to now!copied a map into maps NQ and this shows up on address search.As yet no GPS fix but i will persevere!

Still struggling to get GPS fix.Seems to have stopped at 5 satellites.Dont know what to do to get past this.