PAPAGO! M9 for Android Mobile ( Power By NaviTotal ) - NaviS   

Post a reply

Postby lhooipg » Mon Feb 04, 2013 2:29 am

gawanco wrote:M9 on Galaxy Note 2 with Android 4.1.2 : -

Despite having checked the integrity of all the folders / files of M9 and ensure all the folders and files are there, the M9 still returned the message "Unfortunately, Navitotal! has stoppped".

The same M9 installed on ICS 4.04 works perfectly, but when installed on JB 4.1.2, does not work.

Despite having the resolution files of 1280x720, 720x1280, 1184x720 and 1196x720 in the Organic folder, M9 failed to work.

Hope any one who has installed the M9 successfully will shed some light where I went wrong with the installation on OS 4.1.2.

Thanks/Regards.


Try to copy the whole M9 folder to your external SDcard if you have one...I don't have issue running on 4.1.2 on Note 1 previously...
lhooipg offline

Junior Member



 
Joined: Sat Oct 23, 2010 11:57 am
Posts: 54
Has thanked: 0 time
Been thanked: 0 time
Top

Share On:

Share on Facebook Facebook Share on Twitter Twitter Share on Digg Digg Share on Reddit Reddit Share on Delicious Delicious Share on Tumblr TumblrShare on Google+ Google+Share on MySpace MySpace

Postby gawanco » Mon Feb 04, 2013 7:27 am

I've no issue with Galaxy Note 1. The problem arises when M9 is installed on Note 2 from internal memory with OS 4.1.2. When installed on Note 2 "Unfortunately, Navitotal! has stoppped" would pop up when launched. When installed from external SDcard, it fails to install.

Any further advice to resolve this problem will be greatly appreciated.

Thanks/Regards.
gawanco offline

Junior Member



 
Joined: Sat Oct 08, 2011 2:16 pm
Posts: 59
Has thanked: 0 time
Been thanked: 0 time
Top

Postby havitoc » Mon Feb 04, 2013 10:04 am

gawanco wrote:M9 on Galaxy Note 2 with Android 4.1.2 : -

Despite having checked the integrity of all the folders / files of M9 and ensure all the folders and files are there, the M9 still returned the message "Unfortunately, Navitotal! has stoppped".

The same M9 installed on ICS 4.04 works perfectly, but when installed on JB 4.1.2, does not work.

Despite having the resolution files of 1280x720, 720x1280, 1184x720 and 1196x720 in the Organic folder, M9 failed to work.

Hope any one who has installed the M9 successfully will shed some light where I went wrong with the installation on OS 4.1.2.

Thanks/Regards.


I'm using 4.2.1, M9 is not working.
I've received the stopped message too.
havitoc offline

Junior Member



 
Joined: Fri Oct 05, 2012 2:36 pm
Posts: 5
Has thanked: 0 time
Been thanked: 0 time
Top

Postby marcus02 » Mon Feb 04, 2013 10:17 am

I'm failed to install M9 on my SGS with JB 4.2.1.
marcus02 offline

Junior Member



 
Joined: Tue Oct 19, 2010 8:53 am
Posts: 7
Has thanked: 1 time
Been thanked: 0 time
Top

Postby gawanco » Mon Feb 04, 2013 3:22 pm

Understand from fellow forumer postings :

M9 cannot support Jelly Bean V4.2.1

One or two forumers had the M9 running on :

Jelly Bean V4.1.1 (working on M9)
Jelly Bean V4.1.2 (working on M9)
Jelly Bean V4.2.1 (M9 cannot support)

I don't know what they did with the M9 installer, I still could not get it to run on V4.1.1 and V4.1.2
gawanco offline

Junior Member



 
Joined: Sat Oct 08, 2011 2:16 pm
Posts: 59
Has thanked: 0 time
Been thanked: 0 time
Top

Postby curiou5 » Mon Feb 04, 2013 3:52 pm

gawanco wrote:Understand from fellow forumer postings :

M9 cannot support Jelly Bean V4.2.1

One or two forumers had the M9 running on :

Jelly Bean V4.1.1 (working on M9)
Jelly Bean V4.1.2 (working on M9)
Jelly Bean V4.2.1 (M9 cannot support)

I don't know what they did with the M9 installer, I still could not get it to run on V4.1.1 and V4.1.2


Did you managed to get it working on SGS3. There are two installer files, one M9 Navitotal and the other M9(ckw). I'm using the latter.
[font="Lucida Console"]"[color="purple"]A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty.[/color]" [/font]

- Sir Winston Churchill
curiou5 offline

User avatar Member



 
Joined: Thu Jun 09, 2011 5:09 am
Posts: 171
Has thanked: 0 time
Been thanked: 0 time
Top

Postby mr.chuya » Mon Feb 04, 2013 4:44 pm

@gawanco, I got installer from #1 (MonsterGPS, M9 Navitotal), running well from internal memory on my SGN2 JB 4.1.1. (At 1st attempt I got stop message too when running from external memory card).
And make sure you put "Navisea" folder in the root directory of your internal memory and execute the apk from that location.
mr.chuya offline

Junior Member



 
Joined: Thu Jan 10, 2013 7:39 am
Posts: 3
Has thanked: 0 time
Been thanked: 0 time
Top

Postby gawanco » Tue Feb 05, 2013 2:31 am

curiou5 wrote:Did you managed to get it working on SGS3. There are two installer files, one M9 Navitotal and the other M9(ckw). I'm using the latter.


I don't have any SG S3 with me at the moment. All the SG S3 taken back by my friends. I will try again when I have the set in hand.

I use the standard M9. I will like to try the M9 (ckw) if you can pm me the download link. By the way what is the synonym of "ckw" ?

Up to which version of Adroid OS can the M9 (ckw) support ?

Thanks/Regards.
gawanco offline

Junior Member



 
Joined: Sat Oct 08, 2011 2:16 pm
Posts: 59
Has thanked: 0 time
Been thanked: 0 time
Top

Postby gawanco » Tue Feb 05, 2013 2:40 am

mr.chuya wrote:@gawanco, I got installer from #1 (MonsterGPS, M9 Navitotal), running well from internal memory on my SGN2 JB 4.1.1. (At 1st attempt I got stop message too when running from external memory card).
And make sure you put "Navisea" folder in the root directory of your internal memory and execute the apk from that location.


Dear mr.chuya,

Thanks for the information. My issue is with the SG Note 2 on JB 4.1.2. Can't get it to run neither internal nor external memory installation, but one or two guys in this forum got it working somehow.

Thanks/Regards.
gawanco offline

Junior Member



 
Joined: Sat Oct 08, 2011 2:16 pm
Posts: 59
Has thanked: 0 time
Been thanked: 0 time
Top

Postby gawanco » Wed Feb 06, 2013 3:15 am

Dear curious5,

I've downloaded the NaviSEAckw version of M9 (Many thanks for your effort). All folders and files are intact. Unfortunately, I'm unable to try out the installation at this point of time, as my friends had taken back the SG S3 and Note 2 handsets. I will try out the NaviSEAckw version of M9 as soon as I can lay my hands on the SG S3 and Note 2 devices.

In the meantime, I would appreciate very much if you could advise on the following pointers :

a) :
Will the NaviSEAckw run on SG S3 (other than SG Note 2) with OS 4.1.1 and 4.1.2 ?

b) :
The NaviSEAckw comes without the 1280x720 and 720x1280 resolution files. Is it necessary to copy these two resolution files onto the Organic folder and each of the language folders ?

c) :
The M9 NaviSEAckw installer comes with an additional two files, namely "._.DS_Store" and ".DS_Store" in the root directory and in the Map folder. Are these two files supposed to be patches to resolve the issues found on OS 4.1.1 and 4.1.2 ?

d) :
For the benefits of other forumers, it would be helpful to list the resolution files to use for which version of OS, for example :

1. Which handset device and OS version should use 1280x720 and 720x1280 resolution files.
2. Which handset device and OS version should use 1184x720 and 720x1196 resolution files.

Sorry for my long winded questions. I believe it will be helpful to other forumers to resolve the different issues they encounter installing the M9.

Thanks/Regards.
gawanco offline

Junior Member



 
Joined: Sat Oct 08, 2011 2:16 pm
Posts: 59
Has thanked: 0 time
Been thanked: 0 time
Top

Postby curiou5 » Wed Feb 06, 2013 11:16 am

gawanco wrote:Dear curious5,

I've downloaded the NaviSEAckw version of M9 (Many thanks for your effort). All folders and files are intact. Unfortunately, I'm unable to try out the installation at this point of time, as my friends had taken back the SG S3 and Note 2 handsets. I will try out the NaviSEAckw version of M9 as soon as I can lay my hands on the SG S3 and Note 2 devices.

In the meantime, I would appreciate very much if you could advise on the following pointers :

a) :
Will the NaviSEAckw run on SG S3 (other than SG Note 2) with OS 4.1.1 and 4.1.2 ?
[color="#0000FF"]It works on my SG S3 running on 4.1.2. SG Note, I don't have one to try.[/color]

b) :
The NaviSEAckw comes without the 1280x720 and 720x1280 resolution files. Is it necessary to copy these two resolution files onto the Organic folder and each of the language folders ?
[color="#0000FF"]Oops I might have deleted that resolution folders. Yes you need to copy the resolution file to the Organic folder and the languages folders[/color]

c) :
The M9 NaviSEAckw installer comes with an additional two files, namely "._.DS_Store" and ".DS_Store" in the root directory and in the Map folder. Are these two files supposed to be patches to resolve the issues found on OS 4.1.1 and 4.1.2 ?
[color="#0000FF"]No idea what these files are for.[/color]

d) :
For the benefits of other forumers, it would be helpful to list the resolution files to use for which version of OS, for example :

1. Which handset device and OS version should use 1280x720 and 720x1280 resolution files.
[color="#0000FF"]Should be for those phone having these resolutions. M9 will not work on 4.2[/color]

2. Which handset device and OS version should use 1184x720 and 720x1196 resolution files.
[color="#0000FF"]Except for 1184x720 and 720x1196 folders, I have deleted all the other resolution folders in my SG S3. AFAIK, S3 and HTCx1 use these resolution folders and OS should be until android 4.1.2.[/color]

Sorry for my long winded questions. I believe it will be helpful to other forumers to resolve the different issues they encounter installing the M9.

Thanks/Regards.


I am using Waze most of the time now.
[font="Lucida Console"]"[color="purple"]A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty.[/color]" [/font]

- Sir Winston Churchill
curiou5 offline

User avatar Member



 
Joined: Thu Jun 09, 2011 5:09 am
Posts: 171
Has thanked: 0 time
Been thanked: 0 time
Top

Postby s2mishappy » Mon Feb 11, 2013 10:45 am

I can not open it... after I installed it, then open. it shows blank (balck background) and in 2 seconds it back closed. what wrong with it?
I am using innos-i6C 1.2GHz, 4.0.4.

already doing this thing for the whole day... it can success enter the program but only once and after 5 minutes it suddenly exit by itself.

thank you
s2mishappy offline

Junior Member



 
Joined: Mon Feb 11, 2013 7:14 am
Posts: 1
Has thanked: 0 time
Been thanked: 0 time
Top

Postby gawanco » Mon Feb 11, 2013 4:54 pm

Dear curious5,

I installed the "NaviSEAckw" on SG Note 2 with OS 4.1.2 to-day successfully. All features and functions work perfectly after rebooting the device, except it does not play the M9 tune when the interface loads. Unlike when installed on OS 4.04 on SG Note 1, it plays the beautiful M9 tune before the location map appears. The re-routing is really fast with this new M9.

I actually copied all the NaviSEAckw's resolution folders to the internal memory of the device. Up to this point of time, I'm still wondering as to which resolution folders actually work with SG Note 2 or because of the additional patch files ""._.DS_Store" and ".DS_Store" that did the trick. I left all the resolution folders in the Organic folder in the internal memory.

Can you advise which are the actual resolution folders which are needed and also is there a way to turn on the M9's launch tune ?

Thanks a lot - you're great !
gawanco offline

Junior Member



 
Joined: Sat Oct 08, 2011 2:16 pm
Posts: 59
Has thanked: 0 time
Been thanked: 0 time
Top

Postby 2uk3y » Wed Feb 13, 2013 2:11 am

gawanco wrote:Can you advise which are the actual resolution folders which are needed


for Note 2, u just only need Organic with 1280x720 and 720x1280
2uk3y offline

User avatar Junior Member



 
Joined: Fri Aug 13, 2010 6:56 am
Posts: 41
Has thanked: 0 time
Been thanked: 1 time
Top

Postby gawanco » Wed Feb 13, 2013 5:04 am

Dear 2uk3y,

The NaviSEAckw installer I used successfully on the SG Note 2 with OS 4.1.2 does not contain the 1280x720 and 720x1280 resolution folders.

The NaviSEAckw installer has many other resolution folders, but not the 1280x720 and 720x1280.

The successfull installation could have been the 1184x720, 720x1196, 1280x800, 800x1280 or the 1280x752. There are a total of 22 resolution folders in the Organic folder that came with the NaviSEAckw installer.

I suspect it is the additional "._.DS_Store" and ".DS_Store" patch files that did the trick rather than the resolution folders in the Organic folder.

If it is not the additional patches, then it could have been other resolution folders and not the 1280x720 and 720x1280, because these two resolution folders were not in the Organic folder.

Back to square one, still wondering which are the resolutions that actually got the M9 up and running ?

Thanks/Regards.
gawanco offline

Junior Member



 
Joined: Sat Oct 08, 2011 2:16 pm
Posts: 59
Has thanked: 0 time
Been thanked: 0 time
Top
PreviousNext
Post a reply

Return to Android Apps

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: Bing [Bot] and 7 guests

Switch to mobile style
Powered by phpBB® Forum Software © phpBB Group
phpBB SEO
Design: NaviTotal.com © 2015


NaviTotal.com tested by Norton Internet Security NaviTotal.com tested by McAfee Internet Security