Facebook Twitter RSS Feed      

CONNECT LCN1 Europa - V10   

CONNECT LCN1 Europa - V10

Postby realfog » Sat Jan 11, 2020 4:22 pm

Version V10 is out.
Any benefactor?

[Please Register or Login to download file]
realfog offline


Junior Member



 
Joined: Thu Jun 21, 2012 7:52 pm
Posts: 3
Has thanked: 0 time
Been thanked: 2 times

Re: CONNECT LCN1 Europa - V10

Postby holyhead » Sat Jan 11, 2020 4:31 pm

realfog wrote:Version V10 is out.
Any benefactor?

[Please Register or Login to download file]


No, but you can always,s be the first. :lol:
holyhead offline


V.I.P Member



 
Joined: Tue Jan 26, 2010 11:30 am
Posts: 2046
Has thanked: 44 times
Been thanked: 415 times

Re: CONNECT LCN1 Europa - V10

Postby realfog » Sat Jan 18, 2020 9:05 pm

And the first one I was.
Without password

Off Topic
https://mega.nz/#F!zUIhFAqJ!tyFO2vZBn7ZD_bnZXpl2Tw
Last edited by realfog on Thu Feb 06, 2020 9:34 pm, edited 1 time in total.
realfog offline


Junior Member



 
Joined: Thu Jun 21, 2012 7:52 pm
Posts: 3
Has thanked: 0 time
Been thanked: 2 times

Re: CONNECT LCN1 Europa - V10

Postby satal » Wed Jan 22, 2020 8:05 am

Unfortunately no answer to password request.
satal offline


Junior Member



 
Joined: Sat Feb 27, 2016 3:52 pm
Posts: 1
Has thanked: 0 time
Been thanked: 0 time

Re: CONNECT LCN1 Europa - V10

Postby adrb » Mon Jan 27, 2020 7:45 pm

Available here too:

This board requires you to be registered and logged-in to view hidden content.
adrb offline


Junior Member



 
Joined: Mon Jan 24, 2011 8:16 am
Posts: 8
Has thanked: 2 times
Been thanked: 6 times

Re: CONNECT LCN1 Europa - V10

Postby ra0344 » Thu Aug 06, 2020 9:07 pm

It doesn't work on a non-original sd card, how can I fix this?
ra0344 offline


Junior Member



 
Joined: Mon Nov 18, 2019 4:05 pm
Posts: 1
Has thanked: 0 time
Been thanked: 0 time

Re: CONNECT LCN1 Europa - V10

Postby adrb » Sat Aug 08, 2020 11:46 am

First at all, it is not a copy-paste job.
Then you need a Samsung card that will allow to you to modify the CID.
There are many sites where you can find how to do.
Try this one [Please Register or Login to download file]
adrb offline


Junior Member



 
Joined: Mon Jan 24, 2011 8:16 am
Posts: 8
Has thanked: 2 times
Been thanked: 6 times

Re: CONNECT LCN1 Europa - V10

Postby Hossmann » Wed Oct 28, 2020 6:49 pm

adrb wrote:First at all, it is not a copy-paste job.
Then you need a Samsung card that will allow to you to modify the CID.
There are many sites where you can find how to do.
Try this one [Please Register or Login to download file]


Hello! This link is not working.Can you please give a little more details about the process?
Hossmann offline


Junior Member



 
Joined: Wed Oct 28, 2020 6:37 pm
Posts: 1
Has thanked: 0 time
Been thanked: 0 time

Re: CONNECT LCN1 Europa - V10

Postby adrb » Fri Oct 30, 2020 8:01 pm

The link is definitely working, checked right now.
But let's skip, so:
1 - Card EVO/EVO+ (I tried 32G and 64G SD)
2 - Format card in Windows.
3 - Start Laptop from boot flash Ubuntu
4 - Copy file mmc and mmc32 to Desktop
(find these files here [Please Register or Login to download file] )
5 - Right cick -> open terminal, then go to the Desktop folder ( by command "cd Desktop" )
6 - Make command execution rights by command "chmod 777 mmc32" and "chmod 777 mmc"
7 - Insert the SD in slot. Terminal command "df" and verify the name card.

Somewhere down everything must occur "mmcblk0" + p + a number.
The suffix p "number" is the partition on the card, we are not interested, just use "mmcblk0".
When you do not see anywhere mmcblk0, you must try a different laptop, which has a motherboard integrated card reader.

Now you can read the original CID by command "cat / sys / block / mmcblk0 / device / cid"

8 - change CID by terminal command:
"sudo ./mmc32 prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400"
or
"sudo ./mmc prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400"

Of course, the above cid number is just an example...

Writing new CID: 5d53424c32424d31013917ca53010400
Success! Remove and Reinsert SD card to check new CID.

If you do not see messages about success, remove and reinsert SD card
and check CID by command "cat /sys/block/mmcblk0/device/cid"

Now will be displaying the new CID 5d53424c32424d31013917ca53010400
You should see 5d53424c32424d31013917ca53010401 line.
The last two characters may be different, for example, be 69.
If CID changed besides the last two numbers, so it's okay.
The last two numbers does not matter, it's just a checksum, which generates SD card itself.

If the CID unchanged try again command for changing, remove and reinsert SD card
and check CID by command "cat /sys/block/mmcblk0/device/cid"

If did not change, try the same command, but with different bit version of mmc,
remove and reinsert SD card
and check CID by command "cat /sys/block/mmcblk0/device/cid"

If not change, you must use a different EVO.
adrb offline


Junior Member



 
Joined: Mon Jan 24, 2011 8:16 am
Posts: 8
Has thanked: 2 times
Been thanked: 6 times

Re: CONNECT LCN1 Europa - V10

Postby Olagüe » Thu Nov 12, 2020 11:28 pm

adrb wrote:The link is definitely working, checked right now.
But let's skip, so:
1 - Card EVO/EVO+ (I tried 32G and 64G SD)
2 - Format card in Windows.
3 - Start Laptop from boot flash Ubuntu
4 - Copy file mmc and mmc32 to Desktop
(find these files here [Please Register or Login to download file] )
5 - Right cick -> open terminal, then go to the Desktop folder ( by command "cd Desktop" )
6 - Make command execution rights by command "chmod 777 mmc32" and "chmod 777 mmc"
7 - Insert the SD in slot. Terminal command "df" and verify the name card.

Somewhere down everything must occur "mmcblk0" + p + a number.
The suffix p "number" is the partition on the card, we are not interested, just use "mmcblk0".
When you do not see anywhere mmcblk0, you must try a different laptop, which has a motherboard integrated card reader.

Now you can read the original CID by command "cat / sys / block / mmcblk0 / device / cid"

8 - change CID by terminal command:
"sudo ./mmc32 prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400"
or
"sudo ./mmc prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400"

Of course, the above cid number is just an example...

Writing new CID: 5d53424c32424d31013917ca53010400
Success! Remove and Reinsert SD card to check new CID.

If you do not see messages about success, remove and reinsert SD card
and check CID by command "cat /sys/block/mmcblk0/device/cid"

Now will be displaying the new CID 5d53424c32424d31013917ca53010400
You should see 5d53424c32424d31013917ca53010401 line.
The last two characters may be different, for example, be 69.
If CID changed besides the last two numbers, so it's okay.
The last two numbers does not matter, it's just a checksum, which generates SD card itself.

If the CID unchanged try again command for changing, remove and reinsert SD card
and check CID by command "cat /sys/block/mmcblk0/device/cid"

If did not change, try the same command, but with different bit version of mmc,
remove and reinsert SD card
and check CID by command "cat /sys/block/mmcblk0/device/cid"

If not change, you must use a different EVO.



Thanks for the info! I hope to be patient in the process.
Olagüe offline


User avatar Junior Member



 
Joined: Thu Nov 12, 2020 11:07 pm
Posts: 2
Location: New York City
Has thanked: 1 time
Been thanked: 0 time

Re: CONNECT LCN1 Europa - V10

Postby mickkeelo » Sun Nov 22, 2020 5:25 pm

adrb wrote:4 - Copy file mmc and mmc32 to Desktop
(find these files here [Please Register or Login to download file] )


I'm getting a "This upload does not exist" message :022:
mickkeelo offline


Junior Member



 
Joined: Sun Nov 22, 2020 5:20 pm
Posts: 1
Has thanked: 1 time
Been thanked: 0 time

Re: CONNECT LCN1 Europa - V10

Postby adrb » Wed Dec 02, 2020 6:53 pm

Reuploaded here
[Please Register or Login to download file]

Because this site is for free upload, it is possible to host the upload only for a limited amount of time.
adrb offline


Junior Member



 
Joined: Mon Jan 24, 2011 8:16 am
Posts: 8
Has thanked: 2 times
Been thanked: 6 times

Re: CONNECT LCN1 Europa - V10

Postby mgercek » Mon Jan 04, 2021 9:13 pm

Hi
Is it possible to reupload the file which is on nubmer 4 (Copy file mmc and mmc32 to Desktop)
mgercek offline


Junior Member



 
Joined: Wed Oct 28, 2020 9:43 pm
Posts: 1
Has thanked: 0 time
Been thanked: 0 time

Re: CONNECT LCN1 Europa - V10

Postby adrb » Tue Jan 12, 2021 8:29 pm

ok, check
[Please Register or Login to download file]
adrb offline


Junior Member



 
Joined: Mon Jan 24, 2011 8:16 am
Posts: 8
Has thanked: 2 times
Been thanked: 6 times


Return to Nissan/Renault

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 1 guest