Universal Firmware Patcher for Protected Garmin Devices

GarminNuvi wrote:

davemcwish wrote:Is there a patcher for GPSMap66 ?
<PartNumber>006-B3694-00</PartNumber>
<SoftwareVersion>610</SoftwareVersion>
<Description>GPSMAP 66sr</Description>

Hidden Content

This board requires you to be registered and logged-in to view hidden content.

Hi all,

Is anyone able to provide a new link for this as I get file removed due to inactivity.

[Please Register or Login to download file]

I have the same device & s/w version.

<PartNumber>006-B3694-00</PartNumber>
<SoftwareVersion>610</SoftwareVersion>
<Description>GPSMAP 66sr</Description>

davemcwish wrote:Is anyone able to provide a new link for this as I get file removed due to inactivity.

<PartNumber>006-B3694-00</PartNumber>
<SoftwareVersion>610</SoftwareVersion>
<Description>GPSMAP 66sr</Description>

Hidden Content

This board requires you to be registered and logged-in to view hidden content.

Hello everyone,

I have an Edge 1030. Is it possible to get help with a patch?
Here's the information:

<PartNumber>006-B2713-00</PartNumber>
<SoftwareVersion>1375</SoftwareVersion>
<Description>Edge 1030</Description>

Thank you all for your help.
Jérémy.

jeremydk wrote:<PartNumber>006-B2713-00</PartNumber>
<SoftwareVersion>1375</SoftwareVersion>
<Description>Edge 1030</Description>

software/universal-firmware-patcher-for-protected-garmin-devices-t17987-765.html#p183153

Sorry all but I'm a bit thick today. I tried copying/overwriting the gupdate.gcd file in the garmin folder on my device (GPSMap66sr). After connecting I couldn't see an existing gcd file even after reinstalling the software using Garmin's Webupdater. Just to try i copied GUPDATE_Patched_JNX.GCD and renamed it to gupdate.gcd but ths doesn't work either. Am I missing something here?

After flashing it disappears, see the firmware version in the navigator.

Hi guys!

I have the gps garmin drive 60 model below:

<PartNumber>006-B2268-00</PartNumber>
<SoftwareVersion>610</SoftwareVersion>
<Description>Drive 60</Description>

I found mention some files in this forum.
But the file is no longer available, could someone share it again?

Sorry for the basic question, but does anyone have a step-by-step guide to unlocking?

Thanks!

carlosedu79 wrote:Hi guys!
<PartNumber>006-B2268-00</PartNumber>
<SoftwareVersion>610</SoftwareVersion>
<Description>Drive 60</Description>
Sorry for the basic question, but does anyone have a step-by-step guide to unlocking?
Thanks!

Welcome to the forum,the link has been updated and has instructions how use the SD card Patch kit.

Hello everyone! Please help with a current link to files for patching the Garmin Nuvi 65 navigator firmware.
HWID: 1749
Latest firmware version: 5.60

I tried patching the official firmware v5.60 file, the patching process completed without errors, received the modified firmware file, then renamed it to GUPDATE.GSD, placed the file in the .System directory, but the firmware patching process doesn't occur when replacing the official firmware file and during the second attempt to flash the patched file from a microSD Fat32 memory card.
The navigator thinks for some time when turning on, then reports that software version 5.60 was installed.
However, for some reason this operation doesn't patch the firmware and doesn't enable permission to view unlocked maps, for example, City Navigator Europe NTU 2026.10.

It says it's impossible to unlock the map files!
City Navigator Europe NTU 2026.10 map set - I installed it in the correct file directories according to the instructions.

Therefore, please send me a current link to download the file set for successfully patching the stock firmware v5.60.

Nuvi 65-66 (1749) fw5.60.SD card Patch kit
nuvi65_66_560_Patched.gcd & Nuvi 65-66 (1749) fw5.60.SD card Patch kit

Thank you in advance!

Nuvi 65-66 (1749) fw5.60.SD card Patch kit

ngor17 wrote: please send me a current link to download the file set for successfully patching the stock firmware v5.60.

Link updated

[SOLVED] by updating to latest firmware, the old v18.00 cannot read newest charts

Hello, and thank you for your great job in this forum.
I have before the latest firmware version installed V29.01 on my Echomap UHD 72cv. I’ve copied the patched version dated 2021.09.20 to the SD card, flashed success by followwing thoses steps :

1. Turn the device Off
2. Hold the Power button and number 4 button
3. Release the Power button when the Garmin logo appears
4. Release the number 4 button when Recovery Loader Ready appears
5. Insert the software update card
6. The device will now install the software update

After the downgrade, Now i have the Software version : 18.00 patched version
downloaded from : [Please Register or Login to download file]
but I still can't read the "that seem" unlocked charts
like : BlueChart g2 - HXEU718L - Mediterranean Sea 2017.0 (v18.50)
i used the map unlocker and unlocker alternative, but same issue

What did I miss ?

GARMIN :
<PartNumber>006-B3547-00</PartNumber>
<SoftwareVersion>1800</SoftwareVersion>
<Description>ECHOMAP UHD 72cv</Description>

looking for latest patched firmware (without protection) capable to read unlocked charts

Hello,
How to patch a 32x already on official firmware 2.90 with a patched version to allow TOPO maps.
Is there a link to an update?
Thank you very much.

<Model><PartNumber>006-B3445-00</PartNumber>
<SoftwareVersion>290</SoftwareVersion>
<Description>eTrex 32X

zourinac wrote:<Model><PartNumber>006-B3445-00</PartNumber>
<SoftwareVersion>290</SoftwareVersion>
<Description>eTrex 32X

etrex 32x HWID 3445 firmware 2.90 Patched
Download and unpack GUPDATE_Patched_JNX.GCD on to the PC where your device is attached.Your desktop is easy

Then you can drag-and-drop GUPDATE_Patched_JNX.GCD onto the WebUpdater "Short cut icon" on your desktop.

Requesting for patch firmware.
<PartNumber>006-B2267-00</PartNumber>
<SoftwareVersion>610</SoftwareVersion>
<Description>Drive 40</Description>
</Model>