is it possible to edit the register on a couple of binatone units,to stop the memory defaulting
to a set thing,ie when a unit switched on the memory scale is set about half way,i can move
the slider to the left as far it will go,press ok,but when i reboot the unit it defaults back to the middle

also when you use ceregeditor you can make back up or reflash the back up to the units,
is the back up exactly the same,what i mean is the units is sometimes stuck on booting up
would the back up include this error or not

thanks for looking...

No but you can include a little app in a mortscript that sets it.

I would imagine ceregeditor would back up the whole registry, but restoring it after the device doesn't boot and doesn't connect to the pc would be a problem

could you make me a mortscript please

I will sort one out when I get home...

Download this -> 3701

Extract and copy all the files into the applications directory on your device, (ie, same directory as iGO.exe)
Open Start.mscr with Notepad on your PC and add this to the bottom...
Run (SystemPath("ScriptPath")\"iGO.exe")
Change iGO.exe if necessary
Set the device to run Start.exe

You can edit the number 512 in the script, It's in KB, 128KB is possible sometimes, If you set it too low it won't work and nothing will happen.
If you need to rename Start.exe then also rename Start.mscr to match.

Introduction to Mortscript!

fatboyfun what would you recomend ram mb from these results using easyshell and res info


x430
DEVICE INFORMATION.
Screen resolution 480x272
Windows CE 5
Free / Total RAM available 29240 KB / 49104KB

AVAILABLE DRIVES GREATER THAN 128MB. (Free / Total)
NOTE: Mortscript only reads up to 2047MB
\ResidentFlash (761MB/970MB)
\SDMMC (1874MB/1880MB)

GPS INFORMATION.
Port=7
Baudrate=4800

z430bt
DEVICE INFORMATION.
Screen resolution 480x272
Windows CE 5
Free / Total RAM available 37260 KB / 54624KB

AVAILABLE DRIVES GREATER THAN 128MB. (Free / Total)
NOTE: Mortscript only reads up to 2047MB
\ResidentFlash (3MB/207MB)
\SDMMC (1874MB/1880MB)

GPS INFORMATION.
Port=7
Baudrate=4800

also i did try with the g430 but kept on getting this
expected 'Endif' but found 'Endsub' line 38 (\sdmmc\MobileNavigator\MobileNavigator.mscr):
Endsub,also the active sync says connected as a guest ??

Magnu420 wrote:fatboyfun what would you recomend ram mb from these results using easyshell and res info


x430
DEVICE INFORMATION.
Screen resolution 480x272
Windows CE 5
Free / Total RAM available 29240 KB / 49104KB

AVAILABLE DRIVES GREATER THAN 128MB. (Free / Total)
NOTE: Mortscript only reads up to 2047MB
\ResidentFlash (761MB/970MB)
\SDMMC (1874MB/1880MB)

GPS INFORMATION.
Port=7
Baudrate=4800

z430bt
DEVICE INFORMATION.
Screen resolution 480x272
Windows CE 5
Free / Total RAM available 37260 KB / 54624KB

AVAILABLE DRIVES GREATER THAN 128MB. (Free / Total)
NOTE: Mortscript only reads up to 2047MB
\ResidentFlash (3MB/207MB)
\SDMMC (1874MB/1880MB)

GPS INFORMATION.
Port=7
Baudrate=4800

Is this for SetSystemMemoryDivisionKB.exe? If so set it as low as you can get away with, 64KB, 128KB is possible, but 256KB and 512KB are more likely, This is a safe adjustment.

Magnu420 wrote:also i did try with the g430 but kept on getting this
expected 'Endif' but found 'Endsub' line 38 (\sdmmc\MobileNavigator\MobileNavigator.mscr):
Endsub,also the active sync says connected as a guest ??

What were you trying to run?

Fatboyfun wrote:Is this for SetSystemMemoryDivisionKB.exe? If so set it as low as you can get away with, 64KB, 128KB is possible, but 256KB and 512KB are more likely, This is a safe adjustment.

What were you trying to run?

trying to run easyshell

ok copied over the files,edited 512 to 32,did i have to put KB aswell ??,put them into the primo folder
renamed the igo.exe in script,fired the unit up started primo,will test later today

Magnu420 wrote:ok copied over the files,edited 512 to 32,did i have to put KB aswell ??,put them into the primo folder
renamed the igo.exe in script,fired the unit up started primo,will test later today

Just the number without quotes, 32 is a little low, if it can't be moved that low by setsystemmemorydivision.exe then it doesn't move at all, but if it works...

ok tested this,this morning on binatone z430bt it ran well,didnt crash
or owt or comming up with memory errors,using primo 2 international edition
by zervdim,just need to tweek it more (for me),seems to slow in telling me
next manouver,ie about 5 to 10 yards before next turn,(will look at the sys.text stickies)
also what does verbosity mean ive tried them on all three settings and i cant find any
differance with them

will start a new thread about easyshell crashing on g430

Magnu420 wrote:what does verbosity mean ive tried them on all three settings and i cant find any
differance with them

[Please Register or Login to download file]

an expressive style that uses excessive words

Magnu420 wrote:will start a new thread about easyshell crashing on g430

I will investigate...