VDOdayton PN6000   

VDOdayton PN6000

Postby Robi Tim » Fri Aug 12, 2011 7:21 pm

I need to set maps to VDOdayton PN6000 Either original or IGO or some other. Can someone Help? I bought modified device that is not working. Some IGO is on device but not working and calibration of screen is bad but i cant start original software to correct the calibration. :think:

Please HELP!
:helpsos:
Robi Tim offline


Banned Users



 
Joined: Tue Jul 05, 2011 11:41 am
Posts: 34
Location: Zagreb, Croatia, Croatia
Has thanked: 0 time
Been thanked: 0 time

Postby Fatboyfun » Fri Aug 12, 2011 7:33 pm

Was the screen calibration wrong when you bought it?

An incorrectly set up iGO can give the effect of wrong screen calibration, And as you don't know where the build of iGO came from and who assembled it, It may be easier to replace it with a build from this site than try to fix it.

Let us know how you want to proceed.
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 403 times

Postby Robi Tim » Fri Aug 12, 2011 7:40 pm

I bought modified device with igo on it and bad calibration from the first day. I dont want to fix it if I can put another app on it.
Robi Tim offline


Banned Users



 
Joined: Tue Jul 05, 2011 11:41 am
Posts: 34
Location: Zagreb, Croatia, Croatia
Has thanked: 0 time
Been thanked: 0 time

Postby Fatboyfun » Fri Aug 12, 2011 9:32 pm

1, First thing you need to do is make a backup of the SD card and put it somewhere safe as you may need some files from it, Then delete all the files from it (Or use a different card, Max 2GB.)
2, Download Simple Launcher.
3, Download this version of iGO8.
4, Extract both archives, Note: there will be some .zip files within the iGO folder, Do not unzip these!
5, Read the instructions included in Simple Launcher.
6, Rename RenameMe.exe and RenameMe.mscr to vdoservice.exe and vdoservice.mscr
7, Copy vdoservice.exe, vdoservice.mscr and Mortscript.exe to the root of the SD card. (Max 2GB)
8, Copy the iGO folder to the SD card.
9, Retrieve the sys.txt from the backup and open it with Notepad, look for the [gps] section, note the port and baud numbers.
10, Copy these numbers into the sys.txt section from the newly downloaded iGO.
11, Insert card, Reset device and if all is well a file explorer will appear, Navigate to the iGO 8.exe and tap OK.
12, iGO 8 should start but there will be no content, but we'll sort that, just get the app working first.

Report back...
Currently sleeping...
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 403 times

Postby Robi Tim » Sat Aug 13, 2011 9:47 am

Cant do anything because of screen calibration.....is nthere any way to fix that? Hard reset maybe or something!?
Robi Tim offline


Banned Users



 
Joined: Tue Jul 05, 2011 11:41 am
Posts: 34
Location: Zagreb, Croatia, Croatia
Has thanked: 0 time
Been thanked: 0 time

Postby Fatboyfun » Sat Aug 13, 2011 11:03 am

If the screen calibration is miles out after a hard reset, it is likely to be a hardware issue, I have a screen calibration tool i can upload later to try.
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 403 times

Postby Fatboyfun » Sat Aug 13, 2011 1:10 pm

Screen calibration tool and file explorer...

3615

(Re-uploaded, You will need to rename CECMD.exe to vdoservice.exe)

Extract and copy both files to the root of the SD card and reboot device, using the file explorer navigate to the screen calibration tool and run it, Follow the instructions.
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 403 times

Postby Robi Tim » Sat Aug 13, 2011 1:27 pm

If I need to navigate in file explorer then i will not be able to do anything. Calibration i too bad. When I press at the middle of the screen he push the button at the bottom of screen. Sometimes he does not responde at all. Sorry for my bad english. Thanks for helping me.
Robi Tim offline


Banned Users



 
Joined: Tue Jul 05, 2011 11:41 am
Posts: 34
Location: Zagreb, Croatia, Croatia
Has thanked: 0 time
Been thanked: 0 time

Postby Fatboyfun » Sat Aug 13, 2011 1:50 pm

Rename the screen calibrate tool to vdoservice.exe and reboot to go straight to the calibration screen

Your English is fine!
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 403 times

Postby Robi Tim » Sat Aug 13, 2011 3:23 pm

I did that and calibration is restarting all the time. Every time i finish in the upper right corner it repeats in the middle!?
Robi Tim offline


Banned Users



 
Joined: Tue Jul 05, 2011 11:41 am
Posts: 34
Location: Zagreb, Croatia, Croatia
Has thanked: 0 time
Been thanked: 0 time

Postby Robi Tim » Sat Aug 13, 2011 3:30 pm

I repeat thet several times and turned down VDO. Then I put Simple Launcher and turned on VDO but he opens file explorer and freeze. Calibration I made with no problem but i cant do anything in file explorer. Either he freeze either screen is bad.....:think:
Robi Tim offline


Banned Users



 
Joined: Tue Jul 05, 2011 11:41 am
Posts: 34
Location: Zagreb, Croatia, Croatia
Has thanked: 0 time
Been thanked: 0 time

Postby Fatboyfun » Sat Aug 13, 2011 6:04 pm

It sounds like the previous owner has messed something up, Have you tried a hard reset?

Or failing that, I Found this ROM update...

[Please Register or Login to download file]

Files are [Please Register or Login to download file]

These files are for the VDO Dayton PN6000 ONLY!

Follow the instructions EXACTLY

After the update has finished, try the iGO installation again, If the calibration is still out then it's a hardware problem.
Currently sleeping...
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 403 times

Postby ScorpioPirate » Wed Sep 21, 2011 6:09 pm

Hi Fatboyfun.. I can confirm that software you make here just run perfect on VDO6000...
Thanks... :-)
ScorpioPirate offline


Junior Member



 
Joined: Thu May 20, 2010 8:55 pm
Posts: 43
Has thanked: 0 time
Been thanked: 5 times

Postby Robi Tim » Thu Nov 24, 2011 10:09 pm

Is there any way just to make TV running???
Cannot start navigation so I think to use it as a car TV.
Thanks in advance....
Robi Tim offline


Banned Users



 
Joined: Tue Jul 05, 2011 11:41 am
Posts: 34
Location: Zagreb, Croatia, Croatia
Has thanked: 0 time
Been thanked: 0 time

Postby Fatboyfun » Thu Nov 24, 2011 10:25 pm

Have a look around the file system of the device and see if there's an exe file that starts it.
Fatboyfun offline


User avatar Ex Moderator



 
Joined: Mon May 17, 2010 5:34 pm
Posts: 5782
Has thanked: 2 times
Been thanked: 403 times

Next

Return to VDO Dayton

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 1 guest