Rider3 app on non_Rider and old Rider devices   

Rider3 app on non_Rider and old Rider devices

Postby bmwdriver » Mon Apr 25, 2011 3:59 pm

Maybe someone who don't has a Rider or has an old Rider wants to try the NC 9.205 (Urban Rider; Birthday= 05 July 2010) to use the features of the new Urban Rider.

I have an One 2nd edition (32MB RAM).

I can use use this original NC, but
- available RAM shrinks to ~0MB.
- the GUI looks oldfashioned and not like a Rider.

Thanks to DSA it is possible to run this NC with 32MB RAM (~ 8 MB available) as Urban Rider on any device.


This is a copy of my sdcard:
[Please Register or Login to download file]

*****************************************
NEW:
[SIZE="3"]Urban Rider Special (with MP3 player)[/size]
I tried to mixture my latest configuration with some files from DMs "NC9 ME v2.0.0-pre3".

This is the result:
[Please Register or Login to download file]

Note: You NEED a BT-headset with "Headset, Handsfree and A2DP" capabilities !!!

configuration steps:
- prepare headset to be ready for new connection
- connect (pair) through headset-configuration
- prepare headset to be ready for new connection AGAIN
- connect (pair) through new loudspeaker-settings -> bluetooth (this is the "special")

hints (special edition):
- Each switch on first test voice before playing music
- don't walk out of reach of your bluetooth connection while playing music
- don't copy too much mp3 files onto your sdcard
- special edition does not work on widescreen devices (icons broken)

*****************************************

hints (both):
- use small maps (only one country)
- no need for ASR/Cspeech enabled maps


[SIZE="3"]Feedback would be appreciated..[/size]


additional infos:

TTS is enabled in this configuration, but the files are not included in my backup. You definitely need 64 MB of RAM to use LoquendoTTS v7. In mode "rider" TTS only works on "Rider Special".

If you want to change the mode you have to modify the file "reskin" with a Linux compatible editor (like Notepad++ or UltraEdit for example). Dont use Notepad or Wordpad (CR/LF -> LF problem). These values are supported: x20, x30, x40, x50, rider
You can also just copy one of the attached configuration files to the root of your sdcard if you dont have such an editor.

In Rider-mode you need a bluetooth-headset.
It is expected to work on One 1st, One 2nd, XL 1st, any Go, any Rider.
On TT-devices without bluetooth this would be useless or you forgo sound.

Modes x20/30/40/50 should work on all devices.
Old Rider Cardos are different to those headsets which you can connect through loudspeaker-settings -> bluetooth hifi-device.
Headsets that can be connected this way support "A2DP" (Advanced Audio Distribution Profile). This profile supports hifi quality in stereo.

Old original Rider-headsets support "Headset" and "Handsfree" profiles which are not compatible. They only support mono low quality sound, but have the advantage to remote control your mobile phone. As a result the cpu-load will be lower.

I do use a "JABRA BT320s Bluetooth-Headset" which supports Headset, Handsfree, A2DP and AVRCPPrfile, but many other will work too.

Please read the [Please Register or Login to download file]

Pls. don't ask questions through PM. Do use this forum!


Other absorbing postings of bmwdriver:

History-of-NavCores
Rider3-app-on-non_Rider-and-old-Rider-devices = NC 9.205
latest-NC-prepared-for-small-and-large-devices = NC 9.058, NC 9.061, NC 9.151, NC 9.160, NC 9.205
Best-NavCore-for-Go-x10-Go-x20-and-Go-x30 = NC 9.051
How-to-get-maximum-available-RAM-on-small-devices = NC 8.545
bmwdriver offline


User avatar Junior Member



 
Joined: Mon Apr 25, 2011 3:05 pm
Posts: 40
Has thanked: 0 time
Been thanked: 0 time

Re: Rider3 app on non_Rider and old Rider devices

Postby kippers_cracks » Tue Jun 03, 2014 5:07 pm

Hi all,

i have purchased a tomtom one v2 and would like to convert it to a rider.

the links here are dead.

can anyone please send me new links ?

thanks
kippers_cracks offline


Junior Member



 
Joined: Wed Sep 29, 2010 9:47 pm
Posts: 1
Has thanked: 0 time
Been thanked: 0 time

Re: Rider3 app on non_Rider and old Rider devices

Postby tendriver » Tue Jun 03, 2014 7:25 pm

kippers_cracks wrote:the links here are dead. can anyone please send me new links ?

You may want to look at these instead:

Navcore 9.500 with Rider5 skin

Rider Navcore 9.500
tendriver offline


User avatar Ex Super Mod



 
Joined: Thu May 20, 2010 4:43 pm
Posts: 12005
Has thanked: 339 times
Been thanked: 625 times

Re: Rider3 app on non_Rider and old Rider devices

Postby tomddd » Fri Dec 05, 2014 11:50 pm

Please I need some patch for old Tomtom Rider.
tomddd offline


Junior Member



 
Joined: Tue Mar 22, 2011 11:08 pm
Posts: 8
Has thanked: 2 times
Been thanked: 0 time

Re: Rider3 app on non_Rider and old Rider devices

Postby tendriver » Sat Dec 06, 2014 5:43 pm

tomddd wrote:Please I need some patch for old Tomtom Rider.

See Universal Navcore Installer post 272.
I do not give help by PM. It deprives our other members of a chance to learn. Please post your issue in the appropriate forum/thread. You will get an answer.
tendriver offline


User avatar Ex Super Mod



 
Joined: Thu May 20, 2010 4:43 pm
Posts: 12005
Has thanked: 339 times
Been thanked: 625 times


Return to Tutorials

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: Bing [Bot], TC2 and 3 guests