How to use maps >2GB on devices without SD slot/limited int   

Re: How to use maps >2GB on devices without SD slot/limited

Postby fredderf » Thu Jan 19, 2017 5:14 pm

davef wrote:
Hi All, can anybody confirm these pin assignments are correct?
I would love to give this a try, but it would be nice if it was verified 1st.


The pinouts vary from model to model so you'll have to open yours up and compare them
fredderf offline


Administrator



 
Joined: Sun Nov 17, 2013 2:23 pm
Posts: 2961
Location: UK
Has thanked: 575 times
Been thanked: 3622 times

Re: How to use maps >2GB on devices without SD slot/limited

Postby mikecrazylight » Wed Mar 01, 2017 8:26 pm

I need this information, so hope this works, thank you
mikecrazylight offline


Junior Member



 
Joined: Wed Mar 01, 2017 7:44 pm
Posts: 1
Has thanked: 1 time
Been thanked: 0 time

Re: How to use maps >2GB on devices without SD slot/limited

Postby Quezacotl » Thu May 11, 2017 11:12 am

Hello!

I soldered an micro-SD to my Tomtom XXL.
And when i connect the TT to computer, display disconnected, it sees it as 16GB(the sd card) and works good.
But when the display is connected, only the internal 2GB is visible.

Any suggestions?
Quezacotl offline


Junior Member



 
Joined: Mon May 08, 2017 10:33 am
Posts: 17
Has thanked: 0 time
Been thanked: 0 time

Re: How to use maps >2GB on devices without SD slot/limited

Postby holyhead » Thu May 11, 2017 2:38 pm

Quezacotl wrote:Hello!

I soldered an micro-SD to my Tomtom XXL.
And when i connect the TT to computer, display disconnected, it sees it as 16GB(the sd card) and works good.
But when the display is connected, only the internal 2GB is visible.

Any suggestions?


Wich bootloader you have you need at least 5.5022

[Please Register or Login to download file]
holyhead offline


V.I.P Member



 
Joined: Tue Jan 26, 2010 11:30 am
Posts: 2078
Has thanked: 50 times
Been thanked: 477 times

Re: How to use maps >2GB on devices without SD slot/limited

Postby Quezacotl » Thu May 11, 2017 7:52 pm

holyhead wrote:
Quezacotl wrote:Hello!

I soldered an micro-SD to my Tomtom XXL.
And when i connect the TT to computer, display disconnected, it sees it as 16GB(the sd card) and works good.
But when the display is connected, only the internal 2GB is visible.

Any suggestions?


Wich bootloader you have you need at least 5.5022

http://www104.zippyshare.com/v/utLk9PW5/file.html


It is 5.5282, so apparently it is not about that..
Quezacotl offline


Junior Member



 
Joined: Mon May 08, 2017 10:33 am
Posts: 17
Has thanked: 0 time
Been thanked: 0 time

Re: How to use maps >2GB on devices without SD slot/limited

Postby Quezacotl » Fri May 19, 2017 7:00 am

Okay, i made some progress!

Here's the two TomToms i am currently holding:
DeviceName=TomTom XXL Classic Series
DeviceVersionHW=ONE XXL Classic
BootLoaderVersion=55282

DeviceName=TomTom XXL IQ Routes Edition
DeviceVersionHW=ONE XXL IQ Routes
BootLoaderVersion=55228

Both devices have same PCB revision, v0.6, but despite that, there are some minor differences, like "IQ Routes"-version has one RF-shield missing and those solder points couple of millimeters different than other.

"Classic Series" works with SD-card completely, and "IQ Routes" sees SD card until display is connected.
So that suggests that only the bootloader version differs. But if SDHC support starts from 55022, it shouldn't matter..

I just got a new display for my "Classic Series", so i was able to test it finally :)
Quezacotl offline


Junior Member



 
Joined: Mon May 08, 2017 10:33 am
Posts: 17
Has thanked: 0 time
Been thanked: 0 time

Re: How to use maps >2GB on devices without SD slot/limited

Postby dejobro » Tue Aug 22, 2017 10:16 pm

dimitris93 wrote:Thank you for your reply Downunder35m.

Can you please take another look at the images shown below?
I named the points that I think are the correct ones but as already said, only CMD, DATA0, DATA2, DATA3 en DATA1 are an identical match.
Just to make sure I solder the correct points... :023:
Your help is really appreciated man! :032:

Picture 1:
Image
Picture 2:
Image
(This is the most detail I can shoot with my current camera.)
I think "CMD, DATA0, DATA2, DATA3 and DATA1" are correct because they are identical.
But "CLK, GND and VDD" are not identical to the tutorial.

Questions:
1. I think "CLK" is either the blue or the yellow line, please tell me which one. If none of them, please tell me what point is "CLK".
2. I think "GND" is correct because it is the same component as in the tutorial, although it is in another place. Is this correct?
3. Also for "VDD" it looks different as in the tutorial. I did a guess but I am not sure. Is that the correct pin?


Maybe useful for somebody:
Did this mod today and can confirm that the yellow line is CLK. Measured frequency is 16.5 MHz.
The top two resistors are swapped in this layout.

All other points are correct as well.

I placed the microSD card inside the shielding and used another ground point nearby.

Image

Fixed the wires with glue and insulated the card with kapton tape.
dejobro offline


Junior Member



 
Joined: Sat Aug 19, 2017 2:47 pm
Posts: 1
Has thanked: 0 time
Been thanked: 1 time

Re: How to use maps >2GB on devices without SD slot/limited

Postby ixlion » Wed Aug 23, 2017 8:13 am

Hello, can anybody post the tutorial from Downunder35m, because the link is not good now. I miss the needed pictures.
Many thanks in advance.


Verzonden vanaf mijn iPad met Tapatalk
ixlion offline


Junior Member



 
Joined: Sun Jul 14, 2013 10:03 am
Posts: 11
Has thanked: 22 times
Been thanked: 1 time

Re: How to use maps >2GB on devices without SD slot/limited

Postby jjrp255630 » Tue Oct 24, 2017 8:10 am

hi, can be upload again the manual?

i have try on a xxl tomtom but dont detect the card

regards
jjrp255630 offline


Junior Member



 
Joined: Mon Sep 06, 2010 10:10 am
Posts: 6
Has thanked: 0 time
Been thanked: 0 time

Re: How to use maps >2GB on devices without SD slot/limited

Postby fredderf » Tue Oct 24, 2017 1:00 pm

Image


There is also a tutorial written in Spanish [Please Register or Login to download file]
fredderf offline


Administrator



 
Joined: Sun Nov 17, 2013 2:23 pm
Posts: 2961
Location: UK
Has thanked: 575 times
Been thanked: 3622 times

Re: How to use maps >2GB on devices without SD slot/limited

Postby jjrp255630 » Wed Oct 25, 2017 5:25 pm

hi, i have made all conections like the picture but my tomtom XXL dont detect the car, i put a 4GB card.

i have put Bootloader_5.5285
jjrp255630 offline


Junior Member



 
Joined: Mon Sep 06, 2010 10:10 am
Posts: 6
Has thanked: 0 time
Been thanked: 0 time

Re: How to use maps >2GB on devices without SD slot/limited

Postby holyhead » Wed Oct 25, 2017 5:46 pm

jjrp255630 wrote:hi, i have made all conections like the picture but my tomtom XXL dont detect the car, i put a 4GB card.

i have put Bootloader_5.5285


And have you updated the bootloader before or after you installed the new SD card ?
holyhead offline


V.I.P Member



 
Joined: Tue Jan 26, 2010 11:30 am
Posts: 2078
Has thanked: 50 times
Been thanked: 477 times

Re: How to use maps >2GB on devices without SD slot/limited

Postby jjrp255630 » Wed Oct 25, 2017 6:00 pm

after, have before have 5.5282.

only detect internal memory
jjrp255630 offline


Junior Member



 
Joined: Mon Sep 06, 2010 10:10 am
Posts: 6
Has thanked: 0 time
Been thanked: 0 time

Re: How to use maps >2GB on devices without SD slot/limited

Postby holyhead » Wed Oct 25, 2017 6:56 pm

jjrp255630 wrote:after, have before have 5.5282.

only detect internal memory


Are you shure that the bootloader is 5.5282

Whitch bootloader you have

Checking bootloader (the only reliable method)

Enter a device reset 15 sec.

Then turn on the device and hold the start button until you
get info screen. Which bootloader is there.
holyhead offline


V.I.P Member



 
Joined: Tue Jan 26, 2010 11:30 am
Posts: 2078
Has thanked: 50 times
Been thanked: 477 times

Re: How to use maps >2GB on devices without SD slot/limited

Postby jjrp255630 » Thu Oct 26, 2017 8:31 am

hi

bootloader version: s5.5285

regards
jjrp255630 offline


Junior Member



 
Joined: Mon Sep 06, 2010 10:10 am
Posts: 6
Has thanked: 0 time
Been thanked: 0 time

PreviousNext

Return to Tutorials

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 1 guest