I need some help with my Binatone A430! I upgraded it to TomTom 7.450 with UK Maps 880.3811 and used AutoActivate to create the META.txt file. However when turning on the satnav, the tomtom software loads fine but it says 'No GPS device!', hence its unable to connect to any satellites. My SD card contains the following:

Navigator (folder)
United Kingdom and Republic of Ireland 880.3811 (folder)
ttnavigator
META.txt
SHELL

Where am i going wrong here? Help would be appreciated!

Did you set the gps settings...

Other NMEA Receiver
Baud 57600
Com:7

Fatboyfun wrote:Did you set the gps settings...

Other NMEA Receiver
Baud 57600
Com:7

that did the trick, thanks!

You're welcome!

Hi mate, your incredibly knowledgeable about all this stuff can you help me out please?
I have the CE6 i assume as i have a 4 tone chime when starting up, I have downloaded all the igo primo files and put them on to a SD card but don't work when i plug it in :( now I came across your post here now I am lost? :( I have a binatone F430 I just want to be able to get European maps for free if you can help be great thanks :) oh by the way I'm thick at this kind of stuff :( hack an iphone is my best LOL

Define don't work...

Original software starts
Primo starts but closes
Nothing happens

Check the primo folder on the sd card contains the executable among others and not just one folder...

oh right yeah of course that would help sorry,
ok so i put the sd card in nothing just starts as normal,
I can open all the files through my laptop using the usb cable found the file called MobileNavigator not quite sure if i am men't to change that or the one on the sd card?
I have also put on the sd card \windows\explorer.exe in a shell ini file so i then opened the PDA/satnav as a pc and looked around and found both sets of files but just get it it start up as primo :( I do have to point out mate I am a complete novice at this thing and probably need more help than someone else very sorry :(

You don't have to change anything in the internal memory, so there is no need to connect with a USB cable.

The package was designed to be as easy as possible to install, simply put the shell.ini and the mobilenavigator folder onto a blank sd card, so that when you open the card from (My) Computer that's what you see.

Put the card into the device, switch off and then back on and then tap navigation.

Make sure the shell.ini and MobileNavigator folder is not inside another folder like the one created by winrar, also make sure you're using a sd card not a sdhc card.

Can you provide the rom for Binatone X350 (320x240), but NOT Carrera model?
Thank you!

I sorted it now I just downloaded another file i found and removed the original files to my pc for safe keeping and it worked perfect :) thanks for your help though

@andyd21_8

That's the hard way of doing it, but well done anyway :D

I tried using a SD card and renaming the file what you said to but it just would not open it that way at all :( so I then open the direct drive and removed the original files to my desk top and then put on the IGO files and renamed the file as you stated and it started and works really well, I do have one question for you if you don't mind. I put on 4 UK files as I didnt know which ones i was supposed to as in file name FBL, FDA FTR, etc etc which one do i use??

http://www.navitotal.com/showthread.php?3538-iGO-Primo-Enhancements.

ah perfect thanks a lot mate :)

I have managed to get navigator the launch but cant seem to get the maps to activate so get stuck on the voucher screen

Is there a guide to do this?

Thanks