It is currently Thu Mar 28, 2024 11:06 pm

News News of Tutorials

Site map of Tutorials » Forum : Tutorials

TomTom map download directly by TomTom using TTActivator

- Scope of this thread

The purpose of this discussion is to explain how to download the map directly from TomTom, once the maps are available, using TTActivator.

Attention: only the maps are downloaded, but the maps can only be activated with the meta codes available in other threads.


- TTActivator program thread

The TTActivator program can be downloaded in this thread

TTactivator - Program download


- Use of TTActivator via command line

TTActivator command ...
Read more : TomTom map download directly by TomTom using TTActivator | Views : 5115 | Replies : 8


‎How to update your TOMTOM CARMINAT

Concernant la dernière mise à jour des cartes du 02 mai 2016 - v965-7251 sur le Carminat, il s'avère que FASTACTIVATE NE FONCTIONNE PAS ....
Pour la version de janvier 2022, la cartographie que je vais utiliser ici sera là "France_1080_11144"

Alors, pour que TTUSER EASYTOOLS 950 FONCTIONNE TRES BIEN, il faut:

NE PAS COPIER LE DOSSIER \\TTUSER EASYTOOLS 950\ SUR LA CARTE SD CONTENANT LES MAPS A ACTIVER

1) s'assurer que le fichier meta.txt ...
Read more : ‎How to update your TOMTOM CARMINAT | Views : 8881 | Replies : 26


Installation procedure for Mazda owners with TomTom NB1 navi

Navigation installation procedure for Mazda owners with TomTom NB1 navigation (fuji).

1. Take an empty 8-16-32GB card (I used a 32GB Samsung).

2. Insert it into the car slot, close the cover, start the car on Accessories (or even the engine), wait min. 10 sec and press the NAVI button. Wait until the card initializes and the image disappears with the initialization, then press NAVI again and you will receive a message that you do ...
Read more : Installation procedure for Mazda owners with TomTom NB1 navi | Views : 14139 | Replies : 28


Tomtom XXL added 8gb SDCARD ! succes

i was trying to find information about soldering SDcard on My TomTom XXL 540 second hand (pay 20euro)
and i found pinout soldering point on Poland forum, i try and i succes, now i have 8gb Sdcard working instead of 2gb internal

so here is the pinout if anyone looking for it

enjoy !

Image


ps : you dont need to remove 2gb memory chip like on the picture ..... just solder sdcard and it ...
Read more : Tomtom XXL added 8gb SDCARD ! succes | Views : 1407 | Replies : 2


TomTom Start 60 broken flash

Hi, I have a TomTom Start 40.
I updated it to the latest version, but it crashed a few days later. After switching on, it remained on the logo.
I changed the emmc flash, but the data in
3: rescue
4: content
partitions is damaged.

Does anyone have a dump for this navigation?

00000000-0311-0020-1000-69f2778f0001_system-update.ttpkg

How can I decrypt the .ttpkg package? The information I need is inside. I have uImage, but rootfs.img is corrupted.

Partition ...
Read more : TomTom Start 60 broken flash | Views : 2342 | Replies : 5


How to identify your TomTom device

The best way to identify your device is by using the first two letters of the serial number which can usually be found on a sticker on the device or within the 'about' screen on the device as shown below:

Image
The example above shows it is an STxxxxxxxx = Go Live 1015

Image
This examples serial number is: WNxxxxxxxx = Start 60/ Via 620/ Via 1605


Once you know what the first two letters ...
Read more : How to identify your TomTom device | Views : 5509 | Replies : 4


How to update & patch TomTom NAV3 Devices

This guide will walk you through patching and managing your NAV3 device.

Requirements:
  • NAV3 device with a compatible software version:
  • 11.805.3066201.530
  • 12.075.3065980.74
  • 12.075.3065980.84
  • 12.075.3065980.94
  • 12.101.1102232.101
  • 12.104.1738032.101
  • 12.105.3134902.101

Tools:

This board requires you to be registered and logged-in to view hidden content.


Warning:
  • Any map content you install that you do not actually own ...
Read more : How to update & patch TomTom NAV3 Devices | Views : 31471 | Replies : 61


WNRO Ultimate Solution for Go x10/x20/x30 & 7000

TomTom has released for all these models an update of the last navcore in force before April 6, 2019. The version has increased from 9.510 to 9.541, to correct the bug of WNRO. On the other hand, no update of the navcore Truck 9.702 has been proposed by TomTom, so that the problems of the GPS using this navcore have not been solved.

The ultimate solution: update the firmware.

There are some palliatives to remedy ...
Read more : WNRO Ultimate Solution for Go x10/x20/x30 & 7000 | Views : 16056 | Replies : 49


WNRO GL1 Clock Error/Sat Fixes Workaround

A lot of people who have older devices (Rider, One XL, One 3rd Edition etc) are now experiencing problems with their clocks showing 00:00 and also getting satellite fixes after the well publicized WNRO (GPS World Number Rollover) event on 6th April 2019. The problem is due to the GL1 chip on the circuit board of these devices and it is non-replaceable.

However, I have been working on a possible fix for this problem and ...
Read more : WNRO GL1 Clock Error/Sat Fixes Workaround | Views : 21110 | Replies : 81


How to connect without MyDriveConnect?

Hi, I looking for a tip how i can connect new TomTom? Can I conncet as portable disk?
Read more : How to connect without MyDriveConnect? | Views : 1842 | Replies : 4


 

Login  •  Register


Statistics

Total posts 160817 • Total topics 17068 • Total members 646831